Quexoc Posted September 18, 2008 Share Posted September 18, 2008 Good Evening At first my systemconfig: Mainboard : Gigabyte GA-P35-DS3R CPU: Q6600 2,4ghz RAM: GEIL 2x1GB DDR2 800Mhz Grafic: MSI 8800GTS 512MB HD OC (G92) I have tried many times to install OSX (Leopard 10.5.2), but it fails everytime because of the graficscard. (Maybe something else) It sucks ^^ At the installation are many things to choose, because of that i think, maybe i made a mistake with that. Here a List of things i can choose at the install of OSX86: Kernels kernel_9.2_sleep kernel_9.2_speedstep kernel_9.2.2_kabyl kernel_922_modbin kernel_92_nforce kernel_vanilla_922 Graphics_Drivers Ati_Radeon X1000Series ATYinject for 19xx series NATIT_For_X1000_series ATIRadeonX1000SeriesGraphics 1950gt_pro X2000_HD_and_X3000_HD_Series NATIT_For_X2000_X3000_Series HD2900xt_pro white_menus_fixe_HD2600_pro white_menus_fixe_HD3850_3870x2 ATI_Radeon_HD_2600_Pro_AGP (this one no need for natit and white menufix) ATI_Radeon_HD_2600_XT_AGP (this one no need for natit and white menufix) Nvidia_Geforce (select one only) NVinject NVinject-128 NVinject-256 NVinject-320 NVinject-512 NVinject-640 NVinject-768 NVinjectGO NVinjectGO-512 NVInject_Clevo_M570RU 8700gfx NATIT_gfnvidia Intel_GMA GMA950 (tiger one full accelerated and resolution support but with mouse artifact) GMAX3100 (not tested) Audio_Drivers Intel NVIDIA VIA ATI HDAudioController NVIDIAAC97Audio Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec (generic output support) ALC883_DS3,p5k pro etc... alc889a_shutdown_support ALC882_p5w_dh_deluxe sigmatel_9200_inspiron_9400 Networks_Drivers Networks_Cards AppleBCM440XEthernet AppleBCM5751Ethernet AppleRTL8169Ethernet MarvellNetworkAdapter RealtekR1000 skge_marvell forcedeth Wifi_Card IO80211Family AtherosWirelessAdapter Zydas-ZD1211-1215 wifi_Broadcom_airport RT2500-RT73-USB wifi_AP_Realtek_RTL8187L wifi_Realtek_RTL8187B iwi2200beta Mobo_Chipsets (support for ati ; nvidia ; intel ; via ; sis ; marvell ; jmicron) AppleNForceATA AppleOnboardPCATA AppleVIAATA AppleGenericPCATA SiliconImage3132 Thirds_Applications (will be installed in /applications/KOOLSOFTS/) adium archives candybar changeFinder colloquy fairmount Growl GmailNotifier kextHelperB7 onyx Iphoto macam_iusbcam MacTheRipper Mojo Proxi pacifist perian ppfomatic SimplyBurns solarseek stuffitExpander textmate transmission vlc xbench Patches Hardcoded_SMBIOS Lastnetkassmbios (with coreplayer fix , mozzy and logmein !) AppleSMBIOS-27-Default AppleSMBIOS-27-667 AppleSMBIOS-27-800 AppleSMBIOS-27-1066 AppleSMBIOS-27-DDR3-1333 AppleSMBIOS-27-IM AppleSMBIOS-27-MB AppleSMBIOS-27-MBMem AppleSMBIOS-27-MP OLD tiger SMBIOS_1.0.1 SSE2_Jas1048_ACPI_APIC (may or not work) AppleACPIPlatform AppleAPIC Others PATCHES cpus=1 flag Francais_pc_keyboard_layout TimeMachineFix PowerManagement_bundle (don't install it if you have select sse2 patch !!!) IntelMemoryController USBPCGen (fix usbehci detection problem , enable usb2) AMD_1052_Patches (select patch 1 or patch 2) AMD_1052_Patch_test_1 AMD_1052_Patch_test_2 -legacy flag I installed: -sleepkernel and vanilla kernel -no grafics driver (later the NVinject V.33) -ac889a audio driver -realtek r1000 lan driver -no wlan -all Mobo chipset driver -some progs i need -and no Patches (execpt USBfix) Is this right or have i made a serious mistake? I think my Problems with OSX are caused by the grafics driver. I installed it like this: After Install of OSX i booted with -x and than i installed the NVinject V.33 After reboot i booted with -v , there were no errors and i was immediately into OSX. After another reboot there is only a black screen after the AppleLogo. I tried out many different driver versions (v.41, v.44, many .kext's i found in the Forum). But it worked only few times a short time, than same problems. It would be great if someone could help me..I am going crazy with this... Thanks ;-) And sorry for my bad English, I'm from Germany Greetings Quexoc Link to comment Share on other sites More sharing options...
Recommended Posts