Slither2008 Posted June 29, 2008 Share Posted June 29, 2008 iATKOS 4i 10.5.4 Guide Model : Toshiba A100-PSAARA Hi I'm an ex Windows user, I currently have a Toshiba A100 PSAARA laptop with the following specs. A friend from work suggested I try a mac and after he mentioned all the things it could do I thought I'd have a look.....3 months down the track here is where I'm at. Laptop Specs : Processor : Intel Core 2 Duo 1.6Ghz T5200 Memory : 2Gb DDR2 667Mhz HDD : 120GB Graphics : Nvidia GeforceGo 7600 (256MB dedicated) Wireless : Intel 3945 It came with Windows Vista home premium but due to all the problems of M$ in general the move was inevitable. I'm writing this guide for users that have a similar laptop to mine and anyone else who finds this useful. I've been successful in installing iATKOS v2.0i (OSX 10.5.2) and Kalyway's OSX 10.5.2. They went very well with a lot of hardware compatibility surprisingly.....but iATKOS v4i has been the best so far. I'll start off with listing what you will get working and what you won't get working. Working - Sleep/Wake and Restart/Shutdown - Speedstep support + Graphical User Interface - Internal Wifi - After I replaced it with an atheros pci-express mini wifi card - Internal LAN Network card - Internal Bluetooth. - Internal Fingerscanner / Biometric scanner - Internal PCMCIA card expansion bay - Internal Firewire - Internal Sound card - Audio Output - Nvidia full QE/CI support using nvinject 0.2.1 driver and even QuartzGL support!!! - 32-Bit colour (NO CRAPPY BANDING!!!) - VGA video output Not Working - Internal Card Reader - Internal Sound card - Microphone Installation Section iATKOS 4i with EFI installation Step 1. Boot DVD with no F8 options. Step 2. Click on the arrow in the bottom right to continue Step 3. Click the "Utilities->Disk Utilities" on the Mac menu bar. Step 4. Click the Hardrive itself and not the partitions. Step 5. Click the Partition Tab. Step 6. Click the Current Partition and choose 1 Partition. Step 7. Click the Options button and choose GUID Partition Table. Step 8. Rename the Partition name from "Untitled" to "MACHD" (DO NOT MAKE THE NAME TWO WORDS) THE NEXT STEP WILL ERASE EVERYTHING, CONTINUE AT OWN RISK. Step 9. Ensure the Partition type is "Mac OS Journaled then click Apply. Step 10. Close the Disk Utility app and open up the Terminal. Step 11. Type the following commands : fdisk -e /dev/rdisk0 update f 1 w q Step 12. Close the Terminal and read through all the iATKOS agreements. Step 13. Click on the new MACHD hard drive icon and click continue. Step 14. Click on the Customize button. Step 15. Ensure only the following is ticked : - 'Darwin Bootloader' - 'iATKOS main 4i Main System' - 'Remove Thermal kexts' patch - SMCBIOS netkas patch (Don't choose any Graphic Drivers you install that later) Step 16. Click Done, then install Step 17. Skip the DVD verification check and then wait til the PC boots up MAC OSX Leopard 10.5.4!!! Setting Up your Hardware Bluetooth First before installing anything you need to see if your Bluetooth device is working or not. Step 1. Check in System Profiler and select Bluetooth. Step 2. If it says "No device is preset" then continue to Step 3. If it is present and has plenty of information ie Cambridge Silicon Radio etc.. then continue to Step 5. Step 3. Open up Utilities->Terminal then type : sudo kextload /System/Library/Extensions/IOBluetoothHIDDriver.kext You should then see : /System/Library/Extensions/IOBluetoothHIDDriver.kext Driver loaded sucessfully Step 4. Turn your Wifi switch on the side of the laptop off and on. If successful your Bluetooth device will be detected immediately for use. Step 5. Test and see if it can pair with any Bluetooth devices. BLUETOOTH RULES 1.- ALWAYS TURN BLUETOOTH OFF BEFORE SLEEP. TO DO THIS : 1. TURN THE WIFI SWITCH OFF ON THE SIDE OF THE LAPTOP. 2. PUT LAPTOP TO SLEEP...IT'S THAT SIMPLE! 3. WHEN YOU RESUME JUST SIMPLY TURN THE BLUETOOTH SWITCH ON AGAIN. 2. IF YOU FORGET TO SWITCH OFF THE BLUETOOTH SWITCH AND PUT YOUR LAPTOP TO SLEEP WHEN YOU RESUME YOUR BLUETOOTH HARDWARE WON'T BE DETECTED TO QUICKLY FIX THIS : 1. TURN OF THE BLUETOOTH SWITCH 2. AND THEN PUT IT TO SLEEP. 3. RESUME AGAIN 4. TURN THE BLUETOOTH SWITCH ON AGAIN. YES KNOW IT'S TEDIOUS BUT IT SAVES YOU RESTARTING TWICE AND IT'S THE QUICKEST WAY I KNOW OF GETTING OSX TO REDETECT THE BLUETOOTH DEVICE. Display Driver Installing the Driver with Dual Monitor Support Step 1. Download the NVinject.kext version 0.2.1 from here : http://nvinject.free.fr/files/Latest_NVinject.0.2.1.zip Step 2. Use the Kext Helper 0.7 and drag the NVinject.kext in. This will install it properly and easily. http://www.cheetha.net/Kext_Helper/Software.html Step 3. Reboot your laptop. Step 4. Download this Editor so we can modify the NVinject.kext slightly : http://www.macupdate.com/info.php/id/14363 Step 5. Open up your finder and go here /System/Library/Extensions/ Step 6. Right click on NVinject.kext and select show package contents(The kext file is actually a directory by the way) Step 7. A new finder window appears and now open the Contents folder and open the Info.plist in the Property Editor List. Step 8. Change the NVCAP value to 04000000 00000300 02000000 00000007 00000000 (Please note that you DO NOT edit this in the bottom pane of the Property List Editor....YOU MUST USE THE TOP PANE TO MAKE THE CHANGE!!!! Step 9. Saved and exit the Property List Editor. Step 10. Restart your PC and boot with -f -v. Step 11. Open Display Preferences either the icon in the mac bar at the top or in your System Preferences. Step 12. Click Detect Displays and it should come up with your second VGA monitor. Enabling QE/CI/QGL Step 1.Download the NVInstallerV.41.pkg here : http://scottdangel.com/blog/?p=23 Step 2.Download Pacifist. Step 3.Run Pacifist and open the NVisntallerV.41.pkg package. Step 4.Install only the MacBook drivers. DO NOT INSTALL THE VIDEO DRIVERS OR NETKASMACH KERNEL!!!! Step 5.Use the "OSXTools PcWiz" program to enable the QuartzGL for a graphics power boost!!! Fix the Colour Depth to 32-bit Step 1.Download this kext which connects a fake VGA device to the laptop. This then enables your laptops LCD display to use 32-bit color instead of the 16-bit. Here is the kext : http://forum.insanelymac.com/index.php?sho...7630&st=131 Step 2.restart. Sleep and Wake Step 1. Download the latest 9.4.0 ToH Universal Kernel and System.kext from here : http://leo4all.uni.cc/viewtopic.php?f=17&a...mp;p=2264#p2264 Step 2. Use the OSx86Tools Utility to install the kernel and the kext: http://######.com/osx86tools/ SpeedStep Step 1.Download the driver here : http://code.google.com/p/xnu-speedstep/ Step 2.You can install the kext using OSx86Tools PcWiz. Step 3. Drop it in the utilities folder and type this in terminal to set user rights on the app: cd /Applications/Utilities/SpeedStep.app/Contents/MacOS chmod +x SpeedStep sudo -s chown root:wheel SpeedStep chmod +s SpeedStep Step 4. To start the app automatically on each boot go to System Preferences, Accounts and add it to the login items list. PCMCIA Oh recently I got the PCMCIA port working with the beta 3 of this program : http://forum.insanelymac.com/index.php?sho...1036&st=600 One thing that you must do is if it is hanging on some random "...ColorSetGetChooser???..." error then you must boot with -f and also rm the /System/Library/Extensions.mkext then reboot again with the -f boot option. Biometric Finger Scanner Download and install the Protector Suite for Mac OSX from : http://www.upek.com/solutions/mac/default.asp 2/1 Finger Scrolling Go here : http://forum.insanelymac.com/index.php?showtopic=88811 Follow the instructions exactly but change the zAccept value to 200 instead of the default 80 or the 90-130 he suggested. I found that unless I set it to 200 it would scroll when I didn't want it to. Wifi USB workaround for $40AUD I can confirm that yes the Intel 3945abg wifi card has NO complete driver that works. Until then I'm using a Netgear WG111v3....it cost me $32AUD on sale....here's a hint to find the right model as there are 3 versions....WG111v2 and WG111v3 use a compatible chipset but the WG111 DOESN'T. On the box it doesn't say V2 or V3 clearly it's actually stated in small writing on the side of the box....so ask them to check this when you ask them what version of the WG111 they have. Oh and before I forget V2 uses the chipset name that ends in L and the V3 uses the cipset name ending in B. So get the appropriate driver for each and you'll be fine. Wifi internal for $20AUD It is possible to replace the intel 3945agb wifi mini-pci-express card in the laptop with an Atheros AR5006EGS wifi mini-pci-express card. It is detected without any drivers required in both iATKOS v2.0i and iATKOS v4i. It is an absolute nightmare to install due to short ribbons data cables but I've done it and it is possible. Sound Card The Soundcard output works out of the box but the input mic is not detected. A different config/kext may be required to get this working. Now you can install all your programs and do a software update...then your Finished! Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/ Share on other sites More sharing options...
Slither2008 Posted June 29, 2008 Author Share Posted June 29, 2008 Download Section (Coming Soon) Many thanks to Apple, Insanelymac.com forum contributers, netkas and the makers of the wonderful iATKOS creation!!!! Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-800203 Share on other sites More sharing options...
Onishi Posted July 4, 2008 Share Posted July 4, 2008 great =) I will try a bit later About Sleep/Wake Up mode... What hibernate mode do you have now ? Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-807085 Share on other sites More sharing options...
Slither2008 Posted July 5, 2008 Author Share Posted July 5, 2008 great =) I will try a bit laterAbout Sleep/Wake Up mode... What hibernate mode do you have now ? Hey Onishi, In my BIOS setup it's set to S3 power state and workin pretty good so far. I used the same sleep fix on my PC and that works real good too. I just tried Kalyway 10.5.2 and have finally been able to install the Vanilla kernel Plus Chameleon EFI....KICKASS!!!! I LOVE IT! If anyone is interested in how I installed it lemme know. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-808006 Share on other sites More sharing options...
Slither2008 Posted July 6, 2008 Author Share Posted July 6, 2008 great =) I will try a bit laterAbout Sleep/Wake Up mode... What hibernate mode do you have now ? Hey Onishi, I was puzzled you couldn't get the sleep working like me so I reinstalled several times and also had issues with sleep again....i finally worked out that with the NVinstaller v.41 all you need to install from that is the netkas 10.5.2 patch ONLY. It is also important that when you installed OSX Leopard from the iATKOS dvd that you chose the SMBIOS Netkas patch or it won't work. I have updated the guide to reflect this new discovery. Oh and Kalyway 10.5.2 didn't work Vanilla like I hoped it would....maybe a little hacking after install will help but I'd rather have a quick easy install method and iATKOS v2.0i seems to be fine for my laptop and hardware. I'll be posting a how-to for the wifi card since mine is in the mail right now....should hope to have it all installed and documented by next Saturday after the iPhone release. Regards, Slither2008. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-808775 Share on other sites More sharing options...
Onishi Posted July 6, 2008 Share Posted July 6, 2008 Hey Onishi, I was puzzled you couldn't get the sleep working like me so I reinstalled several times and also had issues with sleep again....i finally worked out that with the NVinstaller v.41 all you need to install from that is the netkas 10.5.2 patch ONLY. It is also important that when you installed OSX Leopard from the iATKOS dvd that you chose the SMBIOS Netkas patch or it won't work. I have updated the guide to reflect this new discovery. Oh and Kalyway 10.5.2 didn't work Vanilla like I hoped it would....maybe a little hacking after install will help but I'd rather have a quick easy install method and iATKOS v2.0i seems to be fine for my laptop and hardware. I'll be posting a how-to for the wifi card since mine is in the mail right now....should hope to have it all installed and documented by next Saturday after the iPhone release. Regards, Slither2008. Can u attach SMBIOS by Netkas ? I've got 2 installations : - the Leo4all - the KalyWay10.5.2 Both the Leo or the Kaly can't provide to me sleep mode (1 - Hibernation mode, with RAM contents written to disk, system totally shut down while “sleeping,” and slower wake up, due to reading the contents of RAM off the hard drive.) =( Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-809281 Share on other sites More sharing options...
Slither2008 Posted July 6, 2008 Author Share Posted July 6, 2008 Can u attach SMBIOS by Netkas ?I've got 2 installations : - the Leo4all - the KalyWay10.5.2 Both the Leo or the Kaly can't provide to me sleep mode (1 - Hibernation mode, with RAM contents written to disk, system totally shut down while "sleeping," and slower wake up, due to reading the contents of RAM off the hard drive.) =( Hi Onishi, I'll try but I'm not sure where to look on the DVD as I installed it at is an option in the iATKOS customize option when installing Leopard. Hopefully it shouldn't be too well hidden. I can confirm that the sleep that works for me is instant off and instant on so I'm pretty sure it's not writing to the hardisk. Regards, Slither2008 Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-809714 Share on other sites More sharing options...
Onishi Posted July 8, 2008 Share Posted July 8, 2008 Slither2008 How about the CPU temperature ? What values do u have both in Mac and Windows XP (Vista) ? My CPU warms harder in the Mac for 15 C. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-811308 Share on other sites More sharing options...
Slither2008 Posted July 8, 2008 Author Share Posted July 8, 2008 Slither2008 How about the CPU temperature ? What values do u have both in Mac and Windows XP (Vista) ? My CPU warms harder in the Mac for 15 C. Hi Onishi, I currently don't have a copy of XP running on my laptop. But I agree that it feels warmer with OSX. I haven't found an accurate method of testing the CPU temps yet. I was hoping the 'Remove Thermal Kexts' patch would do job of reducing the temperature but I'm not sure if it's working. Regards, Steve. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-811336 Share on other sites More sharing options...
Onishi Posted July 16, 2008 Share Posted July 16, 2008 I was hoping the 'Remove Thermal Kexts' patch would do job of reducing the temperature but I'm not sure if it's working. Regards, Steve. No. You are wrong. If you are really interested in solving this problem you should follow next thread http://forum.insanelymac.com/index.php?showtopic=101271 Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-821033 Share on other sites More sharing options...
Slither2008 Posted July 24, 2008 Author Share Posted July 24, 2008 No. You are wrong. If you are really interested in solving this problem you should follow next thread http://forum.insanelymac.com/index.php?showtopic=101271 Cheers. Hopefully someone will find an easy way to fix this. I've found a good program to monitor temps "Hardware Monitor". I'll see what temps my laptop is getting up to. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-831324 Share on other sites More sharing options...
Onishi Posted July 31, 2008 Share Posted July 31, 2008 Cheers. Hopefully someone will find an easy way to fix this. I've found a good program to monitor temps "Hardware Monitor". I'll see what temps my laptop is getting up to. I use the CoolBook and the iStat Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-839808 Share on other sites More sharing options...
Onishi Posted July 31, 2008 Share Posted July 31, 2008 Slither2008, thanx a lot. My fingers reader work greatly via the Protector Suite from : http://www.upek.com/solutions/mac/default.asp About Sleep and Wake Fix!!! It doesn't ever is completely isue to use fixing kernel. In my case I found I need to have right SMBIOS.kext. About 2 finger scroling ... In my Toshiba laptop A100-906 it works with 130 value of zAcceptThreshold Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-839974 Share on other sites More sharing options...
Onishi Posted July 31, 2008 Share Posted July 31, 2008 About sound card ... In my case I solve this problem with TAGURA issue. My bluetooth doesen't work from the box =\ Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-840358 Share on other sites More sharing options...
Onishi Posted August 2, 2008 Share Posted August 2, 2008 Slither2008 I dont know why but my BlueTooth dont even recognized =( My BlueTooth is on USB bus. But lsusb command in the linux terminal give next: ~# lsusb -v Bus 005 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.24-16-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:1d.7 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 8 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 004 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.24-16-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x09da A4 Tech Co., Ltd idProduct 0x000a bcdDevice 0.02 iManufacturer 1 A4Tech iProduct 2 PS/2+USB Mouse iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 3 HID-Compliant Mouse bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 48 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0005 1x 5 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Bus 003 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.24-16-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.24-16-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 001 Device 004: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0483 SGS Thomson Microelectronics idProduct 0x2016 Fingerprint Reader bcdDevice 0.01 iManufacturer 1 STMicroelectronics iProduct 2 Biometric Coprocessor iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 20 Device Status: 0x0000 (Bus Powered) Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.24-16-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-842290 Share on other sites More sharing options...
Slither2008 Posted August 13, 2008 Author Share Posted August 13, 2008 Hi Onishi! Thanks for your great feedback. I appologize I couldn't reply earlier. I ended up replacing my Intel wifi card with a new Atheros that I bought for $18AUD off the internet. It was incredibly hard to open and insert the card into the laptop because of really small ribbon cables in the laptop but after I installed it the card worked straight away with NO kext fiddling required. Strangely enough after the wifi card was replaced the Bluetooth became recognized and I now have a functioning bluetooth. Hope this helps! Regards, Slither2008. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-855298 Share on other sites More sharing options...
Slither2008 Posted August 19, 2008 Author Share Posted August 19, 2008 In case anyone is interested I've installed iATKOS 4i successfully (NO VANILLA KERNEL SORRY) I was lucky enough to find out how to re-enable Quart and Core Image also. Using Pacifist 2.5.2 (shareware) and using it to open the old NVinstall .41 (Always been a good installer for me) Installed the Macbook pkg and *****256.pkg. Deleted /System/Library/Extensions.mkext. Rebooted with -f -v I later followed my old guide above and modified the NVCAP string to enable my Dual monitor again etc. Voilla!!!! QE/CI works for Nvidia 7600GO 256mb!!!! Hope this helps someone!!!! Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-861359 Share on other sites More sharing options...
Slither2008 Posted August 20, 2008 Author Share Posted August 20, 2008 After another 5 installations with iATKOS 4i (intel) I've achieved the following. - MAC OSX 10.5.4 (iATKOS 4i) - FULL SPEED STEP SUPPORTED!!! Auto-adjusts depending on CPU load from 1ghz to 1.33ghz to 1.66ghz - 100% SLEEP AND WAKE SUPPORTED - NVIDIA DUAL MONITOR SUPPORTED - NVIDIA QE/CI SUPPORTED!!!!! - USB PORTS SUPPORTED!!!! The above were essential for bedtime blogging use. They work perfectly and now my battery can last a bit longer. I still have the usual supported, finger scanner, audio, wifi, lan also. If I get a chance tomorrow I'll update this guide with instructions. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-862774 Share on other sites More sharing options...
cmdwedge Posted October 29, 2008 Share Posted October 29, 2008 Hi Slither, can you please update (or add a new post) to show the exact steps you used to get everything working - all of the stuff in your latest post? Also, any chance of posting up some pics of how to go about replacing the wireless card? Cheers! wedge Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-948469 Share on other sites More sharing options...
eddy133 Posted November 5, 2008 Share Posted November 5, 2008 Hi I have the same model except I have the 7300 go, If i followed your guide will it still work?? Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-955675 Share on other sites More sharing options...
murder Posted November 12, 2008 Share Posted November 12, 2008 Hi Slither Using Pacifist 2.5.2 (shareware) and using it to open the old NVinstall .41 (Always been a good installer for me) Installed the Macbook pkg and *****256.pkg. Deleted /System/Library/Extensions.mkext. Rebooted with -f -v it's not work for me What shod I do Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-963071 Share on other sites More sharing options...
Slither2008 Posted November 14, 2008 Author Share Posted November 14, 2008 Hi Slither Using Pacifist 2.5.2 (shareware) and using it to open the old NVinstall .41 (Always been a good installer for me) Installed the Macbook pkg and *****256.pkg. Deleted /System/Library/Extensions.mkext. Rebooted with -f -v it's not work for me What shod I do Hi Murder, It's not the ***256.pkg but the Netkas Kernal pkg that you should install with the Macbook one. Try that and let me know if you're successful. Regards, Slither2008 Hi I have the same model except I have the 7300 go, If i followed your guide will it still work?? The guide will work however it will be a different story for the dual monitor support since you'd have to alter the NVinject driver a little to enable it it doesn't work oob. Regards, Slither2008. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-965664 Share on other sites More sharing options...
murder Posted November 19, 2008 Share Posted November 19, 2008 Thanx Slither2008 it's Work it's work but I try something els Finale did u find anyway to make the Mic Work for the alc861 and Thanx again man you help me so much . GeForce 7600go: Chipset Model: GeForce 7600go Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 128 MB Vendor: NVIDIA (0x10de) Device ID: 0x0398 Revision ID: 0x00a1 ROM Revision: NVinject 0.2.1 Displays: Display: Resolution: 1280 x 800 Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-970895 Share on other sites More sharing options...
murder Posted November 21, 2008 Share Posted November 21, 2008 Up Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-973055 Share on other sites More sharing options...
Timor2008 Posted December 11, 2008 Share Posted December 11, 2008 I wonder how you can swap the internal wifi? On my Toshiba L100, I have tried to swap my Intel945 wifi with dell1390 wifi. It didnot worked. It prevent me from booting. Seem the BIOS is not recognized the dell card. Tough the card is working well on eeepc. Link to comment https://www.insanelymac.com/forum/topic/113047-complete-guide-for-leopard-on-toshiba-a100-psaara-australian-model/#findComment-994759 Share on other sites More sharing options...
Recommended Posts