restlessone Posted August 24, 2005 Share Posted August 24, 2005 Hi, I am heading for x86 OSX and perhaps u guys could tell me if this set up would work. It is a portable computer. CPU-Z Report CPU-Z version 1.30. CPU(s) Number of CPUs 1 Name Intel Pentium M 745 Code Name Dothan Specification Intel(R) Pentium(R) M processor 1.80GHz Family / Model / Stepping 6 D 6 Extended Family / Model 0 0 Brand ID 22 Package mPGA-479M Core Stepping B1 Technology 0.09 µ Supported Instructions Sets MMX, SSE, SSE2 CPU Clock Speed 598.5 MHz Clock multiplier x 6.0 Front Side Bus Frequency 99.7 MHz Bus Speed 399.0 MHz L1 Data Cache 32 KBytes, 8-way set associative, 64 Bytes line size L1 Instruction Cache 32 KBytes, 8-way set associative, 64 Bytes line size L2 Cache 2048 KBytes, 8-way set associative, 64 Bytes line size L2 Latency 5 L2 Speed 598.5 MHz (Full) L2 Location On Chip L2 ECC Check enabled L2 Data Prefetch Logic yes L2 Bus Width 256 bits Mainboard and chipset Motherboard manufacturer MTC Motherboard model CANYON-Intel ODEM, FAB-3 BIOS vendor Insyde Software Corporation BIOS revision R1.03 BIOS release date 11/23/2004 Chipset Intel i855PM rev. B1 Southbridge Intel 82801DB (ICH4-M) rev. 03 Graphic Interface AGP AGP Status enabled, rev. 2.0 AGP Data Transfer Rate 4x AGP Max Rate 4x AGP Side Band Addressing supported, enabled AGP Aperture Size 64 MBytes Memory DRAM Type DDR-SDRAM DRAM Size 512 MBytes DRAM Frequency 166.2 MHz FSB:DRAM 3:5 CAS# Latency 2.5 clocks RAS# to CAS# 3 clocks RAS# Precharge 3 clocks Cycle Time (TRAS) 7 clocks # of memory modules 2 Module 0 MOSEL DDR-SDRAM PC2700 - 256 MBytes Module 1 MOSEL DDR-SDRAM PC2700 - 256 MBytes thanks for any help ! Link to comment https://www.insanelymac.com/forum/topic/1057-if-this-would-work/ Share on other sites More sharing options...
restlessone Posted August 24, 2005 Author Share Posted August 24, 2005 really no one wants to help or gimme an idea or am i being punished because u think i am lazy ? i just dont want to do anything wrong.... Link to comment https://www.insanelymac.com/forum/topic/1057-if-this-would-work/#findComment-6438 Share on other sites More sharing options...
shizo Posted August 24, 2005 Share Posted August 24, 2005 Check these lists of hardware components: http://wiki.osx86project.org/wiki/index.php/HCL http://wiki.osx86project.org/wiki/index.php/HCLPart Link to comment https://www.insanelymac.com/forum/topic/1057-if-this-would-work/#findComment-6469 Share on other sites More sharing options...
Recommended Posts