Search the Community: Showing results for tags 'z370n wifi'.
Found 1 result
ludufre posted a topic in Installation GuidesInstalling macOS Mojave 10.14 on Gigabyte Z370N WIFI + i7 8700K + UHD 630 Changelog: 10/17/2018 08:12h GMT-0 - Fix Kexts permissions commands adjusted. - Removed FrameBuffer patch that is not needed. - Added audio solution and HDMI. - Unfortunately DisplayPort does not work. - Replaced Wifi/BT with DW1560 (BCM94352Z) 10/11/2018 04:15h GMT-0 - Added USB 3.0 patch. - Adjusted some steps. - Changed text formatting. 10/11/2018 03:42h GMT-0 - Added missing UEFI configuration. 10/07/2018 00:36h GMT-0 - First version. What works and what does not - Processor -> Work. All SpeedStep stages.- Video Card -> Work. QE/CI and Metal.- Chipset -> Work.- HDMI (1st) -> Work. - HDMI (2nd) -> Work. - DP -> Not work. - Audio -> Work. - HDMI Audio -> Work.- WiFi/Bluetooth -> Work. Replaced. - Ethernet (1st) -> Work.- Ethernet (2nd) -> Not work.- USB3.0 -> Work.- Sleep -> Work. Todo - Make audio work. - Make HDMI audio work. - Test DisplayPort. - Make second ethernet work. - Replace Wifi/Bluetooth. What you need to install- Running install of macOS- One USB flash drive of 8GB or bigger- macOS Mojave install app- Clover EFI - Clover Configurator - Some KEXTsHow create create the install flash drive Prepare install flash drive Format the flash drive with GUID partition mapping and name it "Install".- Open Disk Utility.- Click in View, then "Show All Devices".- Select the destination flash drive, then Erase.- Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map Create install flash driveOpen terminal and run this command: sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install--nointeraction This will take about 30 minutes. Install bootloaderDownload the CloverEFI (used 4674) and install with this options on "Install macOS Mojave": - Install for UEFI booting only- Install Clover in the ESP- UEFI Drivers - ApfsDriverLoader-64- UEFI Drivers - AptioMemoryFix64 Make things worksWill be created a partition named EFI and mounted in Desktop. Edit the /Volumes/EFI/CLOVER/config.plist inside this new partition, open with Clover Configurator (used 184.108.40.206) Full UHD630 Acceleration config.plist (Clover Configurator): - Uncheck: Acpi - Fixes - FixDisplay - Uncheck: Acpi - Fixes - AddHDMI - Change value: Gui - Screen Resolution to 3840x2160 (Your screen resolution, mine is 4k) - Change value: Rt Variables - CsrActiveConfig to 0x3 - Select value: SMBIOS - Up/Down arrows - iMac18,1 - Intel Core i5-7360U @ 2.30Ghz (I know, it's not our processor, but is that option) Download those Kexts and put in /EFI/CLOVER/kexts/10.14/ - Download the Lilu.kext from here. I used the version 1.2.7. - Download the WhateverGreen.kext. I used the version 1.2.3.RELEASE. All USBs (2.0, 3.0, Type-C, internal) config.plist (Clover Configurator): - Add value: Kernel and Kext Patches - KextsToPatch: Name*: com.apple.driver.usb.AppleUSBXHCI Find* [HEX]: 83FB0F0F 83030500 00 Replace* [HEX]: 83FB0F90 90909090 90 Comment: disable port limit in XHCI kext (credit PMHeart) MathOS: 10.14.x Sleep/Wake config.plist (Clover Configurator): - Check: Boot - Arguments - dart=0 Audio onboard and HDMI config.plist (Clover Configurator): - Change: Device - Audio Injection - layout-id to 7 Download those Kexts and put in /EFI/CLOVER/kexts/10.14/ - Download the Lilu.kext from here. I used the version 1.2.7. (already installed above) - Download the AppleALC.kext from here. I used the version 1.3.2. Wifi and Bluetooth (DW1560 / BCM94352Z) Download those Kexts and put in /EFI/CLOVER/kexts/10.14/ - Download the FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext from here. I used the version 2018-1014. - Download the BrcmFirmwareRepo.kext, BrcmPatchRAM.kext and BrcmNonPatchRAM.kext from here. I used the version 2018-0505. Mandatory Kexts Download those Kexts and put in /EFI/CLOVER/kexts/10.14/ - Download the FakeSMC.kext from here. I used the version 2018-0915. - Download the IntelMausiEthernet.kext from here. I used the version 2018-0424. Put the Clover installer on the flash drive too. Now you can start the instalation without problem (I guess). How install UEFI Setup Configuration and InstallationUEFI configuration - Shutdown and insert the flash.- Power on with DEL pressed to enter BIOS setup.- Change value: Periphelrals - Initial Display to IGP- Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE- Change value: Chipset - VT-d to DISABLE- Change value: Chipset - Internal Graphics to ENABLE- Change value: Chipset - DVMT Pre-Allocated to 128M - Change value: Chipset - Wake On Lan to DISABLE - Save & Exit Setup - Now, hold the F12 - In the list, select your flash drive. - It will show twice. One with UEFI prefix and another without. - Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer" The installer will start. Format destination diskFormat the disk with GUID partition mapping and name it "HD".- Select Disk Utility in the list, then press Continue.- Click in View, then "Show All Devices".- Select the destination Disk, then Erase.- Name: HD, Format: APFS and Scheme: GUID Partition MapClose Disk Utility.Select "Install macOS", then Continue.Follow instructions in screen.After installAfter first part install the system will reboot.The second part of the installation will begin. This will take 16 minutes. Post installationInstall bootloader When the second part of install finish, the system will reboot again.After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.Open the Clover installer inside flash drive that you copied before.Use same options above but choose the system partition this time.Now you need to replace the config.plist inside your destination disk EFI parittion with config.plist inside flash card EFI partition.The flash drive EFI partition is unmounted. Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 1. Last step Copy all Kexts from flash drive to /Library/Extensions, with those commands in Terminal: sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches Restart the system. It's done! And last but not least I would like to thank the following community members, by making these dream possible:@crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.