Search the Community: Showing results for tags 'unable'.
Found 4 results
so i have clover installed and windows 8 installed as uefi. when i boot windows through the bios it works fine but when i boot windows efi through clover it goes to the windows boot logo spins a few times then my monitor just turns off. the computer is still on and the fans are still running so i cant tell if windows is still running just without the graphics card. when i start windows in safemode through clover though it boots just fine. anyone else have this issue or know how to solve it? I have a gtx770 and z87x-ud3h Thanks
Nonta72 posted a topic in OSx86 10.12 (Sierra)Recently, I have been having weird issues installing Sierra to my newly created partition. It always ended up with a NASTY error message saying that it could not unmount the volume for repair (what repair, anyway?). At the first, I thought the volume was dirty, so I booted to my working El Capitan again and had formatted the partition again. It still failed. Then, I thought it was the fact that I was using the installer in El Capitan to install it to the new partition. So, I created an installation USB. The problem surprisingly appeared! The problem: The problem I believe was due to the createinstallmedia tool. If the USB is in fact created with that tool, the installer divides the installation process into two. First, it copies the installation files to the HDD partition (that part creates problem), and then it reboots from that partition to install the files and eventually create the Recovery partition. The problem is that it for some reasons tries to unmount the partition it has booted from, which is obviously not possible; hence, it fails. The root problem probably has much to do with the partitions structure. In my case, I used MiniTools Partition Manager to migrate my Windows installation from my HDD to the new SSD drive. It could have been due to that, although MSR partition is also known to cause problems in some situations. The partition structure was as follow: ESP = EFI Partition MSR = Microsoft Reserved (culprit, too?) Win10 = Windows drive Sierra = New partition created for Sierra Macintosh HD = El Capitan drive (already installed and working) RecoveryHD = El Capitan recovery drive. The solution: Use the "Restore BaseSystem.dmg" method to create the installation USB. Follow these steps: I assume that you have downloaded the installation from Mac App Store. If so, then right click on the file, click "Show Contents Packages". Click on "SharedSupport". You should see InstallESD.dmg. Double click on that file to mount it. Open the OS X Install ESD partition. Make sure that hidden files visible (there are many ways, use Google). Right click on BaseSystem.dmg and click open to mount it. Open Disk Utility. Plug in your USB drive. Click "Partition" and create too partitions. One with 200MB and the other one with whatever size you want. The 200MB partition format should be MS-DOS (FAT) and give it CLOVER as name. The second one's format should be OS X Extended (journaled) and give it USB as name. And click "Apply" to format the USB. Of course, everything on that drive will be destroyed. It's needless to say that you should backup its contents first. While still inside Disk Utility app, click the second partition (it's should be named USB). On the status bar, click on "Edit" and choose "Restore". You should see "Restore from: OS X Install ESD" click on "OS X Install ESD" and choose "OS X Base System" from the dropdown menu. Now click "Restore". You might need your password to complete this task. If so, type it in and click ok then wait. Upon finition, smartly unmount OS X Base System disk under "Disk Images" in Disk Utility. Open the USB drive (the name "USB" will become "OS X Base System", that's why you need to smartly unmount the other one using Disk Utility to avoid confusion.) Inside the USB drive, go to "System" then "Installation" remove the file named "Packages". That's actually an allias (or a shortcut if you want). Go to OS X Install ESD drive. Copy "Packages" folder from there and paste it in your USB/System/Installation. The same way, copy the other files from OS X Install ESD drive to the root of your USB (the root, not inside a folder on the USB drive). You need to typically copy the following files: AppleDiagnostics.chunklist, AppleDiagnostics.dmg, BaseSystem.chunklist, BaseSystem.dmg Install Clover to the first partition of your USB drive named CLOVER (unless named otherwise). Reboot from the USB drive and everything should go smooth and without this error. This should also work for Chameleon bootloader. You might of course not need to create two partitions in this case. You should probably not directly upgrade from El Capitan to avoid this problem. If it happens while you were trying to do an upgrade, you might need to do these steps inside a virtual machine or a working hackintosh.
zzendle posted a topic in General DiscussionI am currently only able to boot from an external storage device. The original installer I used works, and so does a 4gb usb card. The issue is that I get a kernel panic instantly without anything loading. Both the kernel panic and my clover folder are attached. BTW my specs are: Core i7 7500u 16gb ram 512 gb NVMe ssd HP Spectre x360 w023dx Clover.zip
bodich posted a topic in OSx86 10.13 (High Sierra)Hello. I am trying to install 10.13.4 to Samsung 850 Evo 500 GB. I have already well working on same drive 250 GB 10.13.2. Installation starting, I see progress bar, next as usual restarting and coninuing installation. And in one minute (estimated time still did not appear) I have this error... It says: Mac OS could not be installed on your computer Unable to complete operation (if I've translated correctly). (com.apple.osinstall, error -3) I've attached original log file I've saved from there and also attaching it into the spoiler below, screen photo is under the spoiler. Have no idea what it could be, apfs.efi is latest version for 10.13.4, fakesmc is latest, other clover files and config are just the same as on working 10.13.2, clover version latest 4439 (10.13.2 loading well from this efi also). Please help, anybody know what it can be? Installer Log 04-08-18.txt