Search the Community: Showing results for tags 'gtx 1070'.
Found 1 result
foxdanger posted a topic in OSx86 10.12 (Sierra)It's alive! Thx to the master MaLd0n and two good friends, Lucas David and Giesteira Paulo my new machine it's running the MacOS Sierra 10.12.4 PERFECT! SCREENSHOTS AT THE END OF THE POST. First of all I want to say THANK YOU A LOT to Daniel (MaLd0n) da Insanely Mac (esse cara é um gênio), Giesteira Paulo, Samuel Cabral e Lucas David do Hackintosh Brasil. GeekBench CPU Result: https://browser.geekbench.com/v4/cpu/2737610 THIS IS ONLY FOR THIS MOTHERBOARD: Gigabyte z270X Aorus Gaming 5 IT WILL NOT WORK IN ANY OTHER MOTHER BOARD!!! DO IT AT YOUR OWN RISK! MOBO: z270X Aoros Gigabyte Gaming 5 PROC: i7 7700k + Cooler Master Hyper X212 GPU: MSI GTX 1070 8GB DDR5 RAM: 32GB Ram Crucial Elite STORAGE 1: SSD 480GB Kingston STORAGE 2: SSD 128GB Samdisk <- Place where I installed my MacOS STORAGE 3: SSHD Seagate 1TB + Cooler HD STORAGE 4: HD Seagate 2TB FONT: EVGA 600W BQ So, this is what we did: 1 - Download this archive, you gonna use it during all the install. z270x - i7700k - GTX 1070 - MacOS.zip 2 - Get a Sierra 10.12 image. 3 - Create a boot pendrive with WinDiskImage. 4 - Go to EFI partition on the pendrive, replace the “CLOVER” folder for the one inside the "Pendrive Boot Clover folder" from the archive on the step 1. Delete the original one and replace with the one inside the archive from step 1. 5 - Go to your bios and set these options (*really important ones): - Bios First boot - Pendrive * Fast boot - disabled * Windows 8/10 features - other os * Lan pxe boot option ROM - disabled Storage boot control - UEFI * Other PCI devices - UEFI - Peripherals Onboard lan Controller - enabled Intel platform thrust technology ptt - disabled * SW guard extension - software controlled USB 3.0 dac-up 2 - normal Front USB 3.0_1 - normal Intel bios guard technology - disabled * - Peripherals - USB configuration Legacy USB support - enabled * Xhci hand off - enabled * USB mass storage driver support - enabled - Peripherals - Sata and RST configuration Sata controllers - enabled Sata mode selection - AHCI * Aggressive LPM support - enabled - Chipset VT-d - disabled * Internal graphics - auto All the other options - enabled - Power Platform Power management - disabled * Ac back - always off Power on by keyboard - disabled Power on by mouse - disabled Erp - disabled Soft off by power button - instant off Power loading - auto Resume by alarm - disabled Rc6 render standby - enabled 6 - Boot your pendrive and on the Clover boot screen choose the option "Boot Mac OS Install MacOS". 7 - In the first screen choose the language and than at the top menu open the application DISK UTILITY. 8 - Select the HD where you gonna install the OS and click on ERASE button. Use these options: - Name: Any name you want - Format: Mac OS Extended (Journaled) - Scheme: GUID 9 - Click on erase and wait for the formating. 10 - Close the disk utility and back to the install follow the steps, select the HD you already formated and perform the install. 11 - After the install, DON'T remove the pendrive yet. You need it to boot the system for now. Boot from pendrive and now on the Clover boot screen choose the HD you already installed the system, "Boot from MacOS". 12 - Now you have the system on, install the latest version of Clover boot (the install pkg is inside the archive from step 1). At the “INSTALLATION TYPE” screen, click on the “CUSTOMIZE” button and check the boxes only for these options: - Install for UEFI Boot Only - Install Clover in the ESP - Bootloader -> Don’t update MBR and PBR Sectors - Themes (any you want) - Drivers64UEFI -> Fat-64 - Drivers64UEFI -> PartitionDxe-64 - Install Clover Preference Pane (optional) 13 - Click on install and finish the installation. Now you can remove your Boot Pendrive. 14 - Open the Clover Configurator and goes to the “MOUNT EFI”. At the right column theres a “EFI Partitions” box with all the EFI partitions. Look for the one of the mac and click on “MOUNT PARTITION” and then click on “OPEN PARTITION”. 15 - Inside the folder EFI there’s a folder called “CLOVER”. Repleace this folder with the one inside the “System Boot Clover Folder” which you can find in the archives you downloaded at the step 1. Just delete the original one on EFI partition and paste the other one in the same place. 16 - Run the Olarila.command inside the archives of the step 1 and wait for the “completed” message. 17 - Restart the system WITHOUT the boot pendrive. Go to the BIOS Settings and change the first option boot to the HD where u installed the MacOS. Save and reboot. 18 - Download this DMG and install the update from 10.12 to 10.12.4. THIS IS IMPORTANT! THE NVIDIA 10xx VIDEO CARD SERIES ONLY WORKS ON THIS OS VERSION! https://support.apple.com/kb/DL1910?locale=en_US 19 - Now the last step, install NVidia Driver. Download the latest version of the NVidia Web Driver and install it. http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-04192017/(choose the latest version for your system - 10.12.4 in this case). 20 - Download and install NVidia Cuda Drivers: http://www.nvidia.com/object/mac-driver-archive.html YOU ARE READY TO GO!!! Patches used by Daniel (MaLd0n) in the DSDT.aml: - FIX ERRORS AND WARNINGS - HPET - SATA - DTGP - DMAC - SLPB - DARWIN - LPC - XHCI - PLUGIN TYPE - HDAS to HDEF - HDEF - RTC - IRQs - SBUS - BUS1 - MCHC - ALS0 - SHUTDOWN - LAN - USBX - PMCR - EC - PNLF - HDMI NVIDIA / ATI What works: - Intel i7 7700k - OK - Intel HD Graphics 630 - OK - NVidia GTX Video Cards (with pascal, series 10xx) and Cuda Drivers - OK - Memory RAM - OK - Realtek ALC1220 Audio Controller - OK - All back panel audio ports (Internal speakers, 2 line outs, digital output) - OK - DisplayPort Audio output from NVidia GTX - THERE’s ONLY AUDIO THROUGH THE DISPLAYPORT, NO AUDIO THROUGH THE HDMI. But you can easily use a DP - HDMI cable. - Intel PCI Express Gigabit Ethernet Controller RJ45 Port - OK - Qualcomm Atheros Killer E2500 PCI Express Gigabit Ethernet Controller RJ45 Port - OK - All USB Ports, including 3.0 USB - OK - System Power Settings - OK - All the hard drives from my computer, including the ones formmated for windows working - OK (of course the ones formmated on windows, only for read, no write) What doesn’t work: - Boot windows from Clover Boot Screen. But you can use the F12 key to go to BIOS Boot Screen and select the Windows HD to boot. It’s fine - Front panel audio ports So, resuming the system is working PERFECT! Like a charm! Everything works and the machine is CRAZY fast now! Hope it goes fine for everyone too. Cya! SCREENSHOTS: