Search the Community: Showing results for tags 'ga-z170x-gaming 5'.
Found 2 results
Cyberdevs posted a topic in Installation GuidesInstalling macOS® Sierra® on Gigabyte GA-Z170X-Gaming 5 rev 1.0 Intel® Core i7 6700K nVidia® Graphics Maxwell® or Pascal® Disclaimer: This guide will assume that you know what you are doing and also assumes that you have already made a backup of your data before making any changes to your hardware or software. If you have not made a backup STOP HERE! and create one. I will not be held responsible for any data loss or any damage you might cause to your computer in the process of installing macOS® on your computer. By following this guide, you acknowledge that installing Mac OS X® and macOS® on any hardware that is not produced by Apple® is illegal and you will be responsible if you break any laws. All the trademarks and copy rights belong to their respective owners. This guide is only for your personal use and your information, therefore if you break any laws by using this manual you will be responsible for it not me. Any commercial use of the contents of this guide is prohibited. If I forget to mention your name or someone else’s name in the credits section forgive my negligence and feel free to contact me and I will add your name/s. This guide is written specifically for the hardware specifications I’m using, but the principal in general might apply to other hardware with similar specs with the exception of DSDT and SSDT files. Important Notes: 1. Always backup your data before making any changes to your hardware or software. 2. Always keep a bootable Clover USB disk with the latest working configurations just in case. 3. I suggest you use another bootable USB for testing and not to edit the EFI folder on the hard drive. 4. Preferably use the latest BIOS (F21 at the time of writing) version and the latest version of Clover EFI bootloader (4077 at the time of writing). 5. There are two main versions of Clover EFI bootloader available in this package. One for the users with a nVidia GPU and the other one is for the users with IntelHD 530 GPU. 6. So many parts of this tutorial are universal and they apply to all Hackintosh and Apple computers, like creating the Bootable USB disk drive or mounting the EFI partition. So, you can use them on all the computers that run macOS or even use them for installing macOS on other Hackintosh computers. 7. The config.plist, the DSDT.aml file and the SSDT tables are specifically created for the GA-Z170X-Gaming 5 motherboard so do not use them on other hardware because they simply won’t work or even if they do you might experience some problems and errors. 8. This tutorial is based on my personal experience. So, you might need to make some extra adjustments. Downloading the macOS® Sierra installer from App Store: Download the version of macOS® you want to install on your computer from App Store, macOS® Sierra. For downloading the macOS® installer you’ll need an Apple® computer or a working Hackintosh and a valid Apple ID. Although downloading macOS® Sierra® doesn’t require an Apple ID but if you are going to use your Hackintosh for day to day use you’re going to need a valid Apple ID. You can download the macOS® Sierra® installer by using the link below: macOS® Sierra® 10.12.5: https://itunes.apple.com/us/app/macos-sierra/id1127487414?mt=12&ls=1 You can also use App Store directly for downloading it. The “Install macOS® Sierra.app” will be saved to the following path once downloaded: /Applications/ Creating bootable USB Disk for macOS®: Plug in a USB flash drive (8Gb or larger) and launch disk utility to format the flash drive. To create a bootable USB drive for macOS®, everything must be exactly as shown in the picture below. Once you successfully formatted the flash drive, open Terminal from /Applications/Utilities: Copy and paste the following command into terminal without the “”: For macOS® Sierra®: “sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ macOS\ Sierra.app —nointeraction” Press return/enter to run the command. You’ll be asked to give your password and once you type your password press return/enter and the process will start. Depending on the speed of the USB drive you are using it will take about 5 to 30 minutes to complete the process. It took about 5 minutes on my computer to create the bootable disk on a USB 3.0 flash drive. How to mount the EFI partition using command line: Launch the terminal application again if you closed it previously. Type “diskutil list” and press return/enter You’ll see list of all the Internal and the external hard drives Type “diskutil mount /dev/diskXsX” and press return/enter First X is the number of the disk and the second X is the number of the partition In this case the command will be: e.g. diskutil mount /dev/disk2s1 Now you can see the EFI partition of disk6 is mounted on the desktop, if you can’t see the partition on the desktop you can find it in finder window’s “Sidebar” under “Devices” BIOS Settings: Now it’s time to configure the BIOS before installing macOS®. First of all, it’s better to “Load Optimized Defaults” settings on the BIOS so we could start from scratch without having any misconfigurations. You need to make the following changes to get macOS® working on your pc: BIOS: Fast Boot = Disabled Windows 8/10 = Windows 8/10 WHQL or Other OS CSM Support = Disabled Secure Boot = Not Active Attempt Secure Boot = Disabled Peripherals Initial Display Output = PCIe 1 Slot (Only If you are using a nVidia GPU, if you are using an AMD GPU you’ll need to enable IGFX and set it to primary in order to boot into macOS® Sierra®) Trusted computing, Security Device Support = Disable Super IO Configuration, Serial IO = Disable USB Configuration, Legacy USB Support = Enabled USB Configuration, XHCI Hand-off = Enabled USB Configuration, USB Mass Storage Drive Support = Enabled USB Configuration, Port 60/64 Emulation = Enabled SATS And RST Configuration = AHCI Chipset VT-d = Disabled (If you need it add “dart=0” flag to config.plist under Boot section) Internal Graphics = Disabled (Only If you are using a discreet GPU if you are using an AMD GPU you’ll need to enable IGFX and set it to primary in order to boot into macOS® Sierra®) In Chipset, IOAPIC 24-119 Entries = Disable If you are using Intel Graphics or IGFX In Chipset, Internal Graphics = Enabled In Chipset, DVMT Pre-Allocated = set it to 64 In Chipset, DVMT Total Gfx Mem = set it to max Save and Exit. Installing Clover EFI Bootloader: In order to boot successfully into macOS® you’ll need to install a Bootloader on the drive you are using as the main bootable device whether is a flash drive or a hard disk drive. There are number of bootloaders that could be used to boot up the macOS® on a PC computer or a Hackintosh but we will only use Clover EFI Bootloader and here is how to properly install and configure Clover EFI Bootloader on your computer. In this section, we will be installing the UEFI version of the Clover so if you are using the Legacy BIOS version for whatever reason this guide is not for you. You can download the latest version of Clover EFI Bootloader from: https://sourceforge.net/projects/cloverefiboot/ As I mentioned before in the first page of this manual the latest version of the Clover EFI Bootloader is Clover_v2.4k_4077. Stage 1: Once you have downloaded the bootloader double click the installer package to start the installation process. The process will only take few minutes and after that you need to customize or optimize the contents of the EFI partition which you’ve installed clover into. Please make sure you select the USB drive you created earlier as shown below and not the HDD of the computer you are using. If you see the following dialog after double clicking the installer package, all you need to do is to right click on the Clover_v2.4k_r4077.pkg and from the menu select open and once more click the open button. Click continue and read the “Important Information” or not and then click continue once more. You need to select the location that you want to install Clover EFI Bootloader to. Make sure that you are installing clover to the right location, basically you must choose the drive that you have installed macOS® Sierra® onto unless you want to install the bootloader on another drive, say a flash drive. Now you need to customize which components of the bootloader to be installed, if not you won’t be able to boot into macOS® at all. Check the following items and then click install: 1. Install for UEFI booting only (Unified Extensible Firmware Interface) 2. Install Clover in the ESP (EFI System Partition) or (Extensible Firmware Interface System Partition) 3. Install can also choose a theme for your clover bootloader and the CloverThemeManager.app to change or modify the themes later. 4. Install Drivers64UEFI that apply to your system you will need at least these two drivers: 1. EmuVariableUefi-64 2. OsxAptioFix2Drv-64 You can also choose other drivers if they apply to your computer and if you need them, otherwise you’re good to go. 5. You can also install the RC script on the target volume to enable the shell command prompt in clover’s boot screen. Once the installation is started, the EFI partition of the hard disk or USB drive that you are installing clover to will be mounted on the desktop, if you can’t see the partition on the desktop you can find it in the finder window’s “Sidebar” under “Devices” Stage 2: In this stage, you need to configure the config.plist and the other components on the EFI partition either by modifying the config.plist inside the /EFI/Clover/ folder using “TextEdit” or any other text editor application that you like or using “Clover Configurator” (recommended) application which has a GUI for editing the config.plist and it has some other useful built-in apps such as EFI mounter or a Base64 to HEX converter etc. or you can just simply replacing the “Clover” folder with the one that is provided with this guide. At this moment you might not be familiar with all the settings and options inside the config.plist file and Clover Configurator, no need to worry. You can easily replace the whole “Clover” folder inside the “EFI” folder on the EFI partition of your bootable disk (hard disk drive or USB flash drive) with the folder included with this guide and you’ll be good to go as along as your main components specifically your CPU and GPU are the same as mine. Otherwise you might need some additional settings and flags to be added to the config.plist. For instance, if you are using a NVMe SSD disk drive you’ll need to add proper patches in order to get it to work. You can find more about clover and its settings at: https://clover-wiki.zetam.org/Home and you can find “Clover Configurator” at: http://mackie100projects.altervista.org How to enable kext using Clover EFI Bootloader: In this section I will briefly explain how to install kexts that are needed to make your macOS® work more properly and efficiently. As you know all the hardware components in a computer need a so called “Driver” to operate correctly in the operating system. The same principle applies to macOS® and Mac OS X®. We call them “Kext” files or “Extension” files. By default, Apple provides all the required kext files with the operating system to run on a legitimate Apple computer. On the other hand, on a Hackintosh you need to install some extra kext files created by the community to obtain full functionality of your computer. You can either install them directly to “System/Library/Extensions” folder of macOS® Drive or you can place them into the EFI folder on the EFI partition of your bootable drive, which is a better way because if those files are the modified version of an original kext file that Apple is provided after each major update they will be replaced is the OS and you’ll lose the functionality of that particular component or more components. For example, Maxwell and Pascal GPUs have the “Boot to black screen” issue with some SMBIOS settings like iMac17,1, iMac15 and MacPro 6,1 system definitions. It means if you use one of those system definitions your computer will show a black screen after loading macOS® even after installing the nVidiaWebDrivers. So, you’ll need to either change the SMBIOS definition or you need to patch the “AppleGraphicsDevicePolicy.kext” to avoid the black screen. Once you patch the file with whatever method, if you install macOS® update you’ll need to apply the patch all over again. Besides changing the system files in macOS® will mix up the file permission of the files and if it’s not properly installed or if you forget to fix the permission of the files you might render the whole operating system useless and you’ll need to either fix the permissions on the /System/Library/Extensions or for short /S/L/E or you might need to reinstall the whole operating system from scratch. For each version of macOS®, there is a folder inside the following path: /EFI/Clover/kext/ So, you can copy the kexts you need inside the folder that correlates with the version of macOS® you are using. Even if you update the OS, the files inside that path won’t get changed. How to properly adding kext file to /System/Library/Extensions: There are several ways to install additional kexts on macOS, but I will only discuss two methods that are the easiest ways to install kext without having to type any commands in terminal. Using Kext Utility: By using kext utility you can easily install kext files inside /System/Library/Extension. All you have to do is to open the Kext Utility app, type in your password and drag the kext file you want to install into the app’s window and it will install them in to the path give above. The good thing about this app is that it will automatically repairs the permission of the /System/Library/Extension folder and the kext files inside it. Once the process is done you can reboot the system and see the results. Kext Wizard: Kext wizard is another handy tool with more functions built into it, you can select the path for installing the kexts files even to another operating system on another volume. You can repair the permissions and rebuild system kext cache. You can even load kexts files and test them or list the kext that are already loaded in the system. Post Installation: To have a fully functional Hackintosh you need to add the following kext files and DSDT/SSDT files and tables. Kexts: FakeSMC.kext https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/ Audio: AppleALC.kext https://github.com/toleda/audio_CloverALC Lilu.kext https://github.com/vit9696 CodecCommander.kext v2.4.0 for Audio after sleep https://bitbucket.org/RehabMan/os-x-eapd-codec-commander/downloads/RehabMan-CodecCommander-2015-0522.zip Note: Install CodecCommander.kext v. 2.4.0 inside /System/Library/Extensions/ and set darkwake=8 in config.plist to solve the audio after sleep issue. I tried installing it inside /EFI/Clover/kexts/10.12 and /EFI/Clover/kexts/Other and it didn’t work. I also tried other versions of CodecCommander.kext but none of them worked except for the v. 2.4.0. If you don’t want to use Lilu.kext and AppleALC.kext and see the read the “Other methods for activating audio section”. realtekALC.kext with https://github.com/toleda/audio_RealtekALC/blob/master/audio_realtekALC-120.command.zip audio_cloverHDMI-120_v1.0d.command for HDMI Audio: https://github.com/toleda/audio_CloverHDMI/blob/master/audio_cloverHDMI-120.command.zip Ethernet: AppleIntelE1000e.kext https://sourceforge.net/projects/osx86drivers/files/Kext/Snow_or_Above/AppleIntelE1000e.kext.zip/download or IntelMausiEthernet.kext https://bitbucket.org/RehabMan/os-x-intel-network/downloads/RehabMan-IntelMausiEthernet-v2-2017-0321.zip Graphics: IntelGraphicsFixup.kext https://sourceforge.net/projects/intelgraphicsfixup/ if you are using the Intel Integrated Graphics Lilu.kext https://github.com/vit9696 NVidaiGraphicsFixup.kext https://sourceforge.net/projects/nvidiagraphicsfixup/ USB 3.0 USBInjectAll.kext https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads/RehabMan-USBInjectAll-2017-0517.zip Note: I also tested the system without USBInjectAll.kext and all my USB 2.0 and USB 3.0 ports were fully functional so it’s up to you whether to use it or not. VERY IMPORTANT NOTE: Before you start using macOS® Sierra®, you need to change the SMBIOS of the config.plist: You have to change the SMBIOS settings before starting to use macOS® Sierra®, because the config.plist that is included in this guide doesn’t have a serial number for your Hackintosh, so you won’t be able to use any of Apple’s services without a serial number and a hardware UUID. It’s imperative to do so specially if you are going to use your Hackintosh for daily use. If you don’t change the serial number you won’t be able to use App Store, iCloud, iMessage etc. It’s highly recommended that you use iMac 17,1 SMBIOS as your default. iMac 17,1 and iMac 17,2 models use Skylake processors in Apple's original iMacs. For changing the SMBIOS you can use the built-in wizard inside “Clover Configurator” under SMBIOS Section. To open the wizard, click the small magic wand on the right side of the window to use the wizard. Audio: By using the EFI folder included with this guide and by using the patched DSDT/SSDT tables, “AppleALC.kext” and “Lilu.kext” you won’t need to do much to make the audio active on your Hackintosh. Just install the macOS® Sierra®, copy the EFI folder and audio is activated by default, HDMI audio will be active once you install nVidiaWebDrivers and restart the computer. If the audio didn’t work, you can rebuild prelinked kernel and kexts cache by using the following commands in terminal: 1. sudo nvram -c 2. sudo purge 3. sudo rm -f /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache && sudo touch /System/Library/Extensions && sudo kextcache -u / sudo update_dyld_shared_cache -force Or you can use “Kext Utility” to repair permissions on /System/Library/Extensions and /Library/Extensions and also it will also rebuilds the system cache for you. Kext Utility could be found at: http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=186603 Note: If you see the following output in terminal it means that you forgot to mount the EFI partition, mount it and run the command again. Other methods for activating the Audio: 1. audio_codecdetect.command This command will give you useful information about the audio chipsets and devices that are available on the system, after you run the command, the output will be like this: This means that the audio chipset is supported and you can go to the next step of installing the audio using Toleda's scripts. 2. audio_cloverALC-120_v1.0f3.command Type in the password and press return/enter All you need to do now is to reboot the system and you’ll have audio! 3. HDMI Audio For activating the HDMI Audio for you need to run audio_cloverHDMI-120.command This command will detect the audio codec for you integrated graphics and discrete GPU and will add the proper SSDT table to /EFI/Cover/ACPI/patched folder Audio Troubleshooting: If after running the audio_cloverHDMI-120_v1.0d.command you see the following statement It means you either don’t have a patched DSDT.aml file or SSDT tables and no patches are present inside the config.plist so you need to either add the DSDT/SSDT tables or add patches yourself. Don’t be alarmed it’s so easy. Open clover configurator and after mounting the EFI partition, open the config.plist and add the following patch : Under ACPI, DSDT patches select “change HDAS to HDEF” from “List of Patches” and this will add the following code in the config.plist </dict> <key>Comment</key> <string>change HDAS to HDEF</string> <key>Disabled</key> <false/> <key>Find</key> <data> SERBUw== </data> <key>Replace</key> <data> SERFRg== </data> </dict> or Comment: change HDAS to HDEF Find*[HEX] 48444153 Replace*[HEX]48444546 Graphics: This section will be dedicated to nVidia GPUs specially Maxwell and Pascal. If you are using any other nVidia or AMD graphics you can skip this section. We tested these instructions on an EVGA 1070 Superclocked GPU and a Gigabyte nVidia GeForce GTX960 GAMING-4GB (Please include the brand for reference). As you might know the 10 series nVidia GPUs or Pascal are not compatible with Mac OS X El Capitan and earlier versions of macOS® but 9 series and Maxwell are compatible and they both need nVidiaWebDrivers to be fully functional. For macOS® Sierra® 10.12.5 you’ll need to download 378.05.05.15f01 https://images.nvidia.com/mac/pkg/378/WebDriver-378.05.05.15f01.pkg Solution 1: If you are looking for an easy way to get the GPU working all you have to is to copy the Lilu.kext and nVidaiGraphicsFixup.kext inside the kext folder in clover EFI bootloader. The full path is /EFI/Clover/kext/10.12 Once you finished installing macOS® and nVidiaWebDrivers you’ll need to add the following flags and setting to the config.plist Under “Boot” section add or remove nvda_drv=1 if necessary. I don’t need to use it on my computer. You don’t need to inject anything in “Graphics” section Under “System Parameters” check “NvidiaWeb” When installing Clover EFI bootloader under “Drivers64UEFI” install “EMUVariableUefi-64” // I also use OsxAptioFix2Drv.efi, never tested without it. and that’s it! Solution 2: If you don’t want to use nVidaiGraphicsFixup.kext you only have two options: 1. Run AGDP-fix.app to edit the “AppleGraphicsDevicePolicy.kext” to fix “Boot to Black Screen” issue 2. Or you can edit the “AppleGraphicsDevicePolicy.kext” manually using terminal. If you choose the second solution for any reason remember after each major update you need to apply the patch all over again. Wi-Fi: TP-Link WDN4800 works out of the box without any hassle. The only problem that you might encounter with it is "ATHR: unknown locale: 21" error in the verbose boot. The Atheros patch is to avoid the series of "ATHR: unknown locale: 21" messages in the verbose boot which they will be registered in message console's logs and they will make the log file bigger. The patch will fix the WiFi location and will stop the error and therefore there will be no more logs. Without the patch, the WiFi will work just the same but with lots of messages in the log. If you don’t use the TP-Link WDN4800 you can remove the patch or simply leave it as disabled. USB 3.0: Under Kernel and Kext Patches add the following to “KextsToPatch”: This patch will raise the limit of the USB ports from 15 to 26. For macOS® Sierra Name*: AppleUSBXHCIPCI Find* [HEX] : 83bd74ff ffff10 Replace [HEX] : 83bd74ff ffff1b Comment: Raise change 15 port limit to 26 in XHCI kext (100-series) MatchOS: 10.12.x You also might need to add RehabMan’s “USBInjectAll.kext” to the following path under “/EFI/Clover/kexts/10.12” for macOS® Sierra Note: If you are using a patched DSDT or SSDT tables you don’t need to use any DSDT patches in clover and the “USBInjectAll.kext” you will have full functional USB 2.0 and USB 3.0 ports. I didn’t test USB 3.1 ports because I have no USB 3.1 device to test it! The port limit patch must only be temporary, you will need to create your own custom SSDT-UIAC to only inject the ports you use. Custom SSDT-UIAC: A quick rundown on how to create a custom SSDT-UIAC. Add the following patch to your config.plist if you don’t already have the patch. <dict> <key>Comment</key> <string>change 15 port limit to 26 in XHCI kext (100-series)</string> <key>MatchOS</key> <string>10.12.x</string> <key>Name</key> <string>com.apple.driver.usb.AppleUSBXHCIPCI</string> <key>Find</key> <data>g710////EA==</data> <key>Replace</key> <data>g710////Gw==</data> </dict> or Name*: AppleUSBXHCIPCI Find* [HEX] : 83bd74ff ffff10 Replace [HEX] : 83bd74ff ffff1b Comment: Raise change 15 port limit to 26 in XHCI kext (100-series) MatchOS: 10.12.x The USBInjectAll.kext provided in this guide needs to be and stay installed. Download ioregistryexplorer Version 3.0.3 from http://mac.softpedia.com/get/System-Utilities/IORegistryExplorer.shtml or download IOJones which is an alternative to IORegistryExplorer at: https://sourceforge.net/projects/iojones/ Download MaciASL from https://bitbucket.org/RehabMan/os-x-maciasl-patchmatic/downloads/RehabMan-MaciASL-2017-0117.zip and extract, drag MaciASL.app into /Applications. (Credit RehabMan) Download OS-X-USB-Inject-All Master from: (Credit RehabMan) https://github.com/RehabMan/OS-X-USB-Inject-All/archive/master.zip and extract the zip file. Inside the OS-X-USB-Inject-All-master folder you will find SSDT-UIAC-ALL.dsl, copy it to your desktop. Open ioregistryexplorer and find your device id by typing XHC in the search field. Open SSDT-UIAC-ALL.dsl with MaciASL and find your appropriate device id section. Remove all other sections in the SSDT-UIAC-ALL.dsl that do not correspond with your device id leaving just the one section. Skylake does not have a EHCI controller so “HUB1”, ”HUB2”, ”EH01”, "EH02" can be removed and in my case I can also remove "8086_1e31", "8086_8xxx", "8086_9xxx", "8086_9cb1", "8086_9d2f" and "8086_a2af". Compile the file to make sure there are no errors in the code and then save the file with “ACPI Machine Language Binary”. Now we turn our attention to ioregistryexplorer, while you have ioregistry open go to the XHC section and take note of the HSxx or SSxx locations that have devices attached. Now plug in a USB 2.0 device into all USB 2.0 you NEED and do the same with USB 3.0 ports with USB 2 and 3 devices and take note of them all. Returning back to the SSDT-UIAC-ALL.dsl you will see all ports listed, you need to remove the ones you did not take note of and you can also add a comment to the ones you keep. UsbConnector values = USB 2.0 = 0, USB 3.0 = 3. Internal = 255 USB 2.0 devices plugged into USB 3.0 ports HSxx are still marked as USB 3.0 = 3. Internal devices such as Bluetooth etc are marked as 255 Once you gone through and done this to all the devices you need and removed the ones you don’t you can save your SSDT-UIAC-ALL.dsl in MaciASL. Make sure you rename it to SSDT-UIAC and that the file format is ACPI Machine Language Binary Copy and paste the resulting SSDT-UIAC.aml into your EFI/EFI/CLOVER/ACPI/patched folder. Disable the port limit patch in config.plist and add SSDT-UIAC.aml into SortedOrder if needed. Reboot. Open ioregistryexplorer and test the ports you left enabled USB 2 & 3. The number of ports you should see in ioreg should be significantly reduced as they are not being injected anymore. Special Thanks to: I would like to thank MaLd0n for providing the patched version of DSDT and SSDT tables and SavageAUS for doing such a great work on helping me to write this tutorial and testing the files and also writing the “Custom SSDT-UIAC” section. I also would like to thank: Vit9696 for Lilu.kext RehabMan for CodecCommander.kext FakeSMC.kext, IntelMausiEthernet.kext, USBInjectAll.kext. Toleda for AppleALC.kext, Audio commands and kexts netkas for FakeSMC.kext lvs1974 for IntelGraphicsFixup.kext and NvidiaGraphicsFixup.kext hnak for AppleIntelE1000e.kext Mieze for IntelMausiEthernet.kext apianti, blackosx, blusseau, dmazar, slice2009 for Clover EFI Bootloader http://mackie100projects.altervista.org for Clover Configurator Apple Inc. for macOS® and great many other products. And many other great people whom make Hackintosh possible! The hardware I use in my computer: Gigabyte GA-Z170X-Gaming 5 Intel Skylake Core i7 6700K @ 4.0 GHz 32 GB (4x8 GB) 2666 GSKILL Ripjaws EVGA GTX 1070 SC 8 GB - I switched to AMD RX 580 Dual Display 23.5" Kingston HyperX 240GB SATA III SSD 250 GB Samsun EVO 850 SSD TP-Link WDN4800 PCIe Wireless Network Adapter CoolerMaster Silencio 452 Case CoolerMaster Nepton 120XL Liquid Cooler CoolerMaster V750 Watts Power Supply 2x24" Samsung LED Displays + 32" TV SavageAUS's hardware that was used for testing: Gigabyte GA-Z170X-Gaming 5 Intel Skylake core i7-6700k @ 4Ghz 32Gb (4 x 8Gb) DDR4 3200 G.Skill Ripjaws Gigabyte GTX960 GV-N960WF2OC-4GD 240Gb Intel SSD 240Gb Kingston HyperX Savage SSD TP-Link WDN4800 WiFi Corsair H110i AIO Liquid Cooler Corsair RM850i PSU Corsair 760t Case 24" single display Benq GL2450 Please download the PDF version which includes pictures on this guide. I hope you find this tutorial helpful. Best Regards, Cyberdevs GA-Z170X-Gaming 5 Release 01 DSDT and SSDT nVidia Version.zip GA-Z170X-Gaming 5 Release 01 DSDT and SSDT IntelHD 530 Version.zip Installing macOS Sierra on GA-Z170X-Gaming 5 - Final.pdf IORegistryExplorer_3.0.3.zip Updated Clover folders can be found at this post: Updated Folders for macOS High Sierra Updated Folder For macOS Mojave 10.14
First of all I want to thank all the people in advance who helped make this happen all the credit goes to them, I just gathered what I’ve learned from them. Pike R Alpha, RehabMan, Majonéz, Yassinex, Toledo, Todeleda, TheRacerMaster, OiCKilL, Andres ZeroCross, bomerr and many other great minds who helped me out. If any name/s is/are left out please let me know so I put it/them right here. These are my specs: Gigabyte Z170X-Gaming 5 Intel Skylake 6700K @ 4.0 GHz up to 4.2 GHz 4x8 GB 2666 DDR4 GSKILL RIPJAWS Memory Modules Kingston HyperX Savage 240 GB 6Gbps SSD AMD Radeon HD7790 1 GB GDDR5 TP-Link WDN-4800 CoolerMaster Nepton 120XL Cooling Unit CoolerMaster V750-Gold Power Supply Unit CoolderMaster Silencio 452 MidTower Case BIOS Settings: In BIOS from M.I.T. choose Advanced Memory Settings I. From Extreme Memory Profile(X.M.P.) I Choose [Profile1] it's crucial to choose this option if you want your memory modules work with their full frequency. II. Enter the correct System Memory Multiplier which in my case based on my 2666MHz DDR4 it must be 26.6. III. Select [Enhanced Performance] from Memory Enhancement Settings. You can choose any of the options I chose Enhanced Performance. IV. From BIOS Features Fast Boot is disabled, Windows 8/10 Features is set to Windows 8/10 WHQL, LAN PXE Boot Option is disabled, CMS Support is Enabled, Storage Boot Option Control is UEFI Only, Other PCI Device RPM Priority is UEFI Only and Network Stack is Disabled and Secure Boot State is Disabled. V. From Peripherals: VT-d is disabled, Internal Graphics is set to Auto, Audio Controller is Enabled, Audio DSP is Disabled, PCH LAN Controller,SATA Configuration is set to AHCI, Wake on LAN and High Precision Timer are Enabled. I didn’t patch my BIOS because of a great job that Pike R Alpha did with a kext based patch for Skylake processors and to patch the AppleACPI.kext. Under Super IO Configuration Serial Port must be disabled as well. UPDATE: I recently updated my BIOS to f5h and IOAPCIEntries 24-119 Entries is there so if you are using that version of the BIOS or anything prior to original f4 you don't need to use the ACPI patch. VI. Save your new settings and reboot. Here is a copy of my EFI folder which works great with this configurations, Just remember I didn’t inject any Graphic Adapters so you have to configure it with yourself based on the graphic adapter you are using. https://www.dropbox.com/s/7bthzjmrhex9ivp/GA-Z170X-Gaming%205.zip?dl=0 Activating Audio: Download and install VoodooHDA 2.8.8.V3 Use clover configurator to edit your config.plist ACPI: "Add the following DSDT Patch" Comment: Rename HDAS to HDEF Find* [HEX] :48444153 Replace [HEX] :48444546 Set the following flags under Boot section: kext-dev-mode=1 and rootless=0 The audio won't work by default, you need to install Toledo's audio driver or install VoodooHDA. Toledo's commands are available at: https://github.com/t...audio_CloverALC and VoodooHDA is available at: http://sourceforge.n...ects/voodoohda/ I personally use VoodooHDA instead of Toledo's script because for some unknown reason with Toledo's audio kexts and script while I was playing musics after a few minutes I could hear a noise which was getting worse so I tried VoodooHDA and now it work perfectly fine. My audio layout is set to 1. FYI: If you are going to use VoodooHDA just remember after you installed the VoodooHDA there will be a file in your application folder called "VoodooHdaSettingsLoader" which you need to place it in your login items in system preferences under "Users and groups" ---> "login Items" and adjust the "input Gain" under "VoodooHDA" in system preferences to avoid the hissing sound every time the OS starts. and if you don't every time you restart the system you'll need to adjust your audio settings. By loading this application OS will remember you settings and load them. USB 3.0 Under ACPI add this DSDT Patch: Comment: change _OSI to XOSI Find* [HEX] : 5F4F5349 Replace [HEX] : 584F5349 and Comment: Change EHC1 to EH01 Find* [HEX] : 45484331 Replace [HEX] : 45483031 and Comment: Change EHC2 to EH02 Find* [HEX] : 45484332 Replace [HEX] : 45483032 Under Kernel and Kext Patches add the following to “KextsToPatch”: Name*: AppleUSBXHCIPCI Find* [HEX] : 83BD8CFEFFFF10 Replace [HEX] : 83BD8CFEFFFF15 Comment: Raise USB Port Limit You also need to add RehabMan’s “USBInjectAll.kext” to the following path under EFI\Clover\kexts\10.11\ which is available for download at RehabMan’s site. https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads Graphics: I Use an AMD RadeonHD 7790 Graphic Adapter with these settings: Under Graphics: Dual Link is set to 1, FB Name is set to Baladi, VRAM is set to 1024, Video Ports is se to 4, Load VBIOS is checked and finally Inject ATI is checked too. Under Kernel and Kext Patches: ATI Connectors Data is set to: 000400000403000000010300120403030004000004030000000101001102010100040000040300000001020021030202000400000403000000010400220504040004000004030000000105001000050500040000040300000001060020010606 and ATI Connectors Patch is set to: 000800000400000000010300220503030004000004000000000101002103010200040000040000000001020012040201040000000400000000010400010204040400000004000000000105000000050600040000040000000001060020010605 and finally Ati Connectors Controller is set to 8000 Cheers!