Search the Community: Showing results for tags 'full working'.
Found 3 results
wmchris posted a topic in Installation GuidesThis tutorial has been updated on GITHUB to 10.14 and 10.15 the tutorial on insanelymac got too fragmented for a simple forum thread and will not be updated, but still be used for discussion and hints, tips and tricks Dell XPS 15 (9550, Version of 2016) Sierra 10.13.1 Tutorial Before we start: this installation includes real time DSDT/SSDT patching from within clover. This is pretty easy to install. But it is NOT suited for people with no or only few knowledge in Hackintosh Systems. If you only know how to copy commands in your shell and you dont know what they're doing, then stop the tutorial and revert to windows or buy a real mac. Even if you get it running: this system is not failsafe and will be broken multiple times in its usage time, where you have to fix it without a tutorial. Optional steps are marked in GREEN, System dependent steps are BLUE English is not my mother-tongue and i'm writing this without proof reading, so please forgive my bad spelling If you've questions or something doesn't work: first check if you've done all steps of this tutorial! If yes: please read the whole thread (doesn't matter how long it is) before asking to prevent multiple questions. Additionally do a search in google and this forum. Credits: Many knowledge of "how to hackintosh a dell in the first place" by the tutorial of @Gymnae http://www.insanelymac.com/forum/topic/319766-dell-xps-9550-detailled-1011-guide/ Using many kexts and solutions from @RehabMan What's not working: Hibernation (works somehow, but high chance to destroy your whole data), Sleep works fine! SD-Card reader Killer 1535 Wifi (rarely used, need replace) nVidia Graphics card (Intel works) FileVault 2 (full HDD encryption) Requirements: one working MAC OS X Enviroment 16GB USB Stick (larger is sometimes not bootable and/or requires advanced partitioning) MacOS High Sierra 10.13.1 installation file from the app store (redownload, just in case) Knowledge in PLIST editing USB Harddrive for backup - you'll loose all data on your computer! Step 1: Prepare Installation Use the existing Mac to download the Sierra installer from the App Store and create a bootable USB stick with CLOVER. You can do this with the App "Pandora's Box" of insanelymac (use google for download link), which is pretty easy to use. Optional: check if your SSD can be switched to 4k sector size. This prevents NVMe corruption. See https://github.com/wmchris/DellXPS15-9550-OSX/blob/10.13/4k_sector.md After you've finished you need to download the Dell XPS 15 specific configurations for clover. Link: https://github.com/wmchris/DellXPS15-9550-OSX/archive/10.13.zip and unzip this file or checkout git directly: git clone https://github.com/wmchris/DellXPS15-9550-OSX.git You only need the folder 10.13, you can delete the 10.11. I'll refer to this folder by "git/" Now mount the hidden EFI partition of the USB Stick by entering diskutil mount EFI Inside the terminal. Mac OS will automaticly mount the EFI partition of the USB stick, but just in case: make sure it really is Overwrite everything in the CLOVER folder of the partition EFI with the content of git/10.13/CLOVER. If your PC has a Core i5 processor, you'll have to modify your config.plist in EFI/EFI/CLOVER/: search for the Key ig-platform-id: 0x191b0000 and replace it with 0x19160000. If you could use the 4k sector patch, replace the config.plist with the 4kconfig.plist. If you use a hynix device and you didnt do the 4k sector switch, you'll have to add the following patch to your config.plist <key>Comment</key> <string>IONVMeFamily Pike R. Alpha Hynix SSD patch</string> <key>Disabled</key> <false/> <key>Find</key> <data>9sEQD4UcAQAA</data> <key>Name</key> <string>IONVMeFamily</string> <key>Replace</key> <data>9sECD4UcAQAA</data> Go into the EFI Configuration (BIOS) of your Dell XPS 15: Also disable the SD-Card Reader to reduce the power consumption drastically. Insert the stick on the Dell XPS 15 and boot it up holding the F12 key to get in the boot-menu and start by selecting your USB-Stick (if you've done it correctly it's named "Clover: Install macOS Sierra", otherwise it's just the brandname of your USB-Drive). You should get to the MacOS Installation like on a real mac. If you're asked to log-in with your apple-id: select not now! Reason: see Step 5. Step 2: Partition and Installation INFORMATION: after this step your computer will loose ALL data! So if you haven't created a backup, yet: QUIT NOW! Dont install macOS yet. Select the Diskutil and delete the old partitions. Create a new HFS partition and name it "OSX". If you want to multiboot with Windows 10, then you'll have to create a second partition, too (also HFS! Dont use FAT or it will not boot! You have to reformat it when installing Windows). Make sure to select GUID as partition sheme. Close the Diskutil and install OSX normally. You'll have to reboot multiple times, make sure to always boot using the attached USB stick. So dont forget to press F12. After the first reboot you should see a new boot option inside clover, which is highlighted by default. Just press enter. If you only see one, then something went wrong. Step 3: Make it bootable After a few reboots you should be inside your new macOS enviroment. You can always boot into it using the USB stick. Remove the USB drive after successful bootup. Enter diskutil mount EFI in your terminal, which should mount the EFI partition of your local installation. install git/Additional/Tools/Clover_v2.4k_r4003.pkg. Make sure to select "Install Clover in ESP". Also select to install the RC-Scripts. This should install the Clover Boot System. Now copy everything from git/10.13/CLOVER to EFI/CLOVER like you did before by creating the usb stick. (if you had to modify the config.plist in step 1, do it here, too). Your system should be bootable by itself. Reboot and check if your system can boot by itself. Step 4: Post Installation Because all DSDT/SSDT changes are already in the config.plist, you dont need to recompile your DSDT (albeit i suggest doing it anyway to make your system a lil bit more failsafe, see gymnaes El-Capitan tutorial for more informations). So we can skip this part and go directly to the installation of the required kexts. Open a terminal and goto the GIT folder. sudo cp -r ./Post-Install/LE-Kexts/* /Library/Extensions/ sudo mv /System/Library/Extensions/AppleACPIPS2Nub.kext /System/Library/Extensions/AppleACPIPS2Nub.bak 2> /dev/null sudo mv /System/Library/Extensions/ApplePS2Controller.kext /System/Library/Extensions/ApplePS2Controller.bak 2> /dev/null sudo ./AD-Kexts/VoodooPS2Daemon/_install.command Now you'll have to replace the config.plist. Because you'll install modified kexts you'll HAVE TO replace the config.plist in your installation. Otherwise your PC will not boot anymore. diskutil mount EFI replace EFI/CLOVER/config.plist with git/Post-Install/CLOVER/config.plist. Again: if your PC has a Core i5 processor, search the config.plist for the Key ig-platform-id: 0x191b0000 and replace it with 0x19160000. OPTIONAL (in case you've audio problems): AppleHDA has some problems after Wake-Up. You'll have to plug in a headphone to get your speakers working again. You can use VoodooHDA instead, which breaks the headphone jack most of the time, but makes the rest much more stable. sudo rm -r /Library/Extensions/CodecCommander.kext sudo rm /EFI/EFI/CLOVER/ACPI/patched/SSDT-ALC298.aml then remove from your config.plist from the key "KextsToPatch" the elements "AppleHDA#1" to "AppleHDA#7". Install the package: git/Post-Install/AD-Kexts/VoodooHDA-2.8.8.pkg i also suggest moving some of the kext from EFI/CLOVER/kexts/10.13 to /Library/Extensions. It's just more stable. Finalize the kext-copy by recreating the kernel cache: sudo rm -rf /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache sudo rm -rf /System/Library/PrelinkedKernels/prelinkedkernel sudo touch /System/Library/Extensions && sudo kextcache -u / sometimes you'll have to redo the last command if your system shows "Lock acquired". OSX 10.12.2 removed the posibility to load unsigned code. You can enable this by entering sudo spctl --master-disable If you're using the 4K monitor, you'll have to copy the UHD enabling kexts to your clover directory: sudo cp ./Post-Install/AD-Kexts/UHD-Kexts/* /EFI/EFI/CLOVER/kexts/10.13/ To enable GPU acceleration: Edit your clover config file again and remove the following block from it: To prevent getting in hibernation (which can and will corrupt your data), just set the default sleep mode to "suspend to ram" (sleep) instead of "suspend to disk" (hibernation) sudo pmset -a hibernatemode 0 To get HDMI Audio working: Search for your Boarrd-ID in the config.plist and open /S/E/AppleGraphicsControl.kext/contents/plugin/AppleGraphicePolicy.kext/contents/info.plist with a texteditor. Search for your board-id in there and change the value of it from "Config2" to "none" OPTIONAL (alternative power management): the whole power management is done by intels speed step technology (HWP), which is enabled in the clover config. If you want to let OSX manage the power management, you'll have to do these steps: sudo cp ./Post-Install/CLOVER/ACPI/optional/SSDT.aml /EFI/EFI/CLOVER/ACPI/patched/ then open the config.plist (/EFI/EFI/CLOVER/config.plist) and change <key>HWPEnable</key><true/> to <key>HWPEnable</key><false/>. Step 5: iServices (AppStore, iMessages etc.) WARNING! DONT USE YOUR MAIN APPLE ACCOUNT FOR TESTING! It's pretty common that apple BANS your apple-id from iMessage and other services if you've logged in on not well configured hackintoshs! If you want to use the iServices, you'll have to do some advanced steps, which are not completly explained in this tutorial. First you need to switch the faked network device already created by step 4 to be on en0. Goto your network settings and remove every network interface. sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist Reboot, go back in the network configuration and add the network interfaces (LAN) before Wifi. You also need to modify your SMBIOS in the config.plist of Clover in your EFI partition with valid informations about your "fake" mac. There are multiple tutorials which explain how to do it like "http://www.fitzweekly.com/2016/02/hackintosh-imessage-tutorial.html". It's possible you have to call the apple hotline to get your fake serial whitelisted by telling a good story why apple forgot to add your serial number in their system. (aka: dont do it if you dont own a real mac). I personally suggest using real data from an old (broken) macbook. Step 6: Upgrading to macOS 10.13.2 or higher / installing security updates Each upgrade will possibly break your system! (Update: after the latest updates in this tutorial the system should be update-proof.) Step 7: Fixes / Enhancements / Alternative Solutions / Bugs See: https://github.com/wmchris/DellXPS15-9550-OSX/blob/10.13/Tutorial_10.13_Step7.md Afterword and fixes as i said before: this is not a tutorial for absolute beginners, albeit it's much easier then most other tutorials, because most is preconfigured in the supplied config.plist. Some Dells have components included, which are not supported by these preconfigured files. Then i can only suggest using Gymnaes tutorial which explains most of the DSDT patching, config.plist editing and kexts used in detail and use the supplied files here as templates. Warning: Some people have reported multiple data losses on this machine. I suggest using time-machine whenever possible! If your device is detected as "Model Name: Apple Device", see: http://www.insanelymac.com/forum/topic/319764-guide-dell-xps-15-9550-sierra-10122-quick-installation/page-13?do=findComment&comment=2362337 If you want to save the settings of the display brightness: downgrade to clover 3899, in the never versions the nvram restore is broken. USBInjectAll is not intended for permanent use. You should check which USB are really required to be injected and modify your DSDT/SSDT. 4K Touchscreen only: Multitouch can be achieved with the driver from touch-base.com, but it's not open source - costs > 100 $ Not a bug: if you REALLY want to use the 4K Display natively and disable the Retina Mode (max 1920x1080), see: http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-retina-display-faq/macbook-pro-retina-display-hack-to-run-native-resolution.html Tutorial Updates 27. March 2017: UHD Kexts added, replaces perl command 23. March 2017: 4k sector tutorial against NVMe corruption added 7. March 2017: Suggestion to disable the SD Card Reader for reduced power consumption 4. February 2017: Dell SMBIOS Truncation workaround added 23. January 2017: Hynix SSD fix added 31. December 2016: USB-C Hotplug Fix and USB InjectAll Removed 28. December 2016: NVMe SSDT Spoof precreated, FakeID already preset in installation config.plist. VoodooHDA added as alternative to SSDT-ALC298 patch as well as color coding in tutorial 22. December 2016: FakeSMBios added Accessories Appendix: The official Dell adaptor DA200 (http://accessories.euro.dell.com/sna/productdetail.aspx?c=at&l=de&s=dhs&cs=atdhs1&sku=470-abry) works completly on Sierra 10.2.2. You can use the Network, USB, HDMI and VGA. Everything is Hot-Pluggable a cheap 3rd party noname USB-C -> VGA adaptor didnt work you can charge the Dell with a generic USB-C Power Adaptor, but USB-C has only a maximum power of 100W, so it's either charging OR usage, not both. Dont forget you need a special USB-C cable (Power Delivery 3.0) for charging.
Lotrofans posted a topic in Installation GuidesHi there, here is a full guide how you can install Yosemite on Asus K56CM | A56CM | S56CM and similar devices! There are so many guides how to install the 'OS X Installer' on an USB, so i don't write here anything about this. Step-By-Step: Prepare booting: If you have Windows installed, disable 'Fast-Boot-Mode'. Reboot into BIOS and set the follow parameters: Boot: Launch CSM XHCI: Disabled Secure Boot Control: Disabled USB Legacy Enabled WARNING: DO NOT EDIT ANYTHING IN: 'INTEL ANTI-THEFT' Install Mac OS X Yosemite When your PC shows the 'Asus logo' press ESC and select for example: 'Vebratim Store 'n Go' (Your USB-Device). In Chameleon, Select USB and text "-x" -> then press enter. Wait till booted up. Go to 'Utilities' and then 'Disk-Utility'. Select your drive and open the 'Partition' tab. Now select 1. Partition and format your drive to HFS+. (You have to select 'MASTER BOOT RECORD' as Partition Map) . Close 'Disk-Utility'. Follow the setup. After Installation restart and boot from USB again. Configure Mac OS X 10.10 Now select your drive and text '-x' again -> then press enter. Configure you're Hackintosh and log into your Account. (You can only use Ethernet here!). Install Kext Download the attachment: 'K56CM.zip'. K56CM.zip (download link not work? Download it here) Then open 'Kext Wizard' Go to installation tab. Drag and Drop all Files from the 'Kext' folder in the list. Select install -> Wait... Go back to 'Maintenance' tab. Select 'Repair Permission' and 'Repair Cache' for System/Library/Extensions. Now open Finder and browse to '/System/Library/Extensions/' . Delete follow files: GeForce.kext GeForceGA.kext GeForceGLDriver.bundle GeForceVADriver.bundle NVDAGF100Hal.kext NVDAGK100Hal.kext NVDAResman.kext NVDAStartup.kext You can delete 'Tesla' Files but its not important. 10. Restart and boot from USB again. You don't have to start with "-x" again! Install Bootloader Download and unzip 'Extra.zip' (Download it here: https://www.dropbox.com/s/eu4vx8qqlas75za/Extra.zip?dl=0) Copy Extra folder to '/' (Yes, to '/') Restart. You don't need the USB again. Audio You want to hear you favorite songs? No problem! Follow this guide: Download 'VoodooHDA.zip' and unzip. VoodooHDA.zip Install VoodooHDA. Restart. Working List? Ok: Ethernet Bluetooth Battery (With Percent) DVD watch and burn. Trackpad USB Mouse Keyboard Webcam Graphics (Intel HD 4000) Sleep HDMI VGA (but very bad!) Not working? Realtek Card Reader WiFi ( but you can replace it) Intern microphone GT360M Graphics Fn keys Thx to Piuma for his old instruction And the VoodooTeam Have fun with Yosemite (Tested with 10.10.1 and 10.10.2) An Install-Guide-Video is in work Sorry for my brevity ## Die Deutsche Anleitung kann hier gefunden werden: http://www.insanelymac.com/forum/topic/304417-anleitung-so-installiert-ihr-yosemite-auf-dem-asus-k56cm-und-ähnlichen-laptops/
julsmerlin posted a topic in Installation GuidesSONY VAIO FIT macOS SIERRA 10.12.3 UNDER CONSTRUCTION AGAIN. --- Sorry guys, there have been some things missing, or had been in wrong order. Because of the extrem long guide, I removed the content temporarily. Will be fixed soon.