Search the Community: Showing results for tags 'elan'.
Found 4 results
UDPSendToFailed posted a topic in OSx86 10.14 (Mojave)Hi, I have problem with latest VoodooPS2Controller.kext, it's impossible to do anything with the touchpad. Here is a video of what happens if I touch it or try to move the cursor: https://www.youtube.com/watch?v=Bvt-wmNXvVs It clicks and moves randomly, sometimes left and / or right click stuck making impossible to click with an external mouse too. I found ApplePS2SmartTouchPad.kext, but it's very outdated and has too much bugs which I can't fix. Is there any normally working alternative? Thanks for help!
Salve, sono un soddisfatto possessore di un hackintosh (ASUS K56CB, i3-3217U-nVidia740M-SSD-8GB di RAM), una sola cosa mi fa ancora preferire Windows a MacOS, il touchpad, il mio PC monta un elan PS2, il problema è che in rete ho trovato solo 2 tipi di kext 1. VoodooPS2 che però non mi fa funzionare ne tastiera ne pad 2. Kext elan fatto da un utente che mediante le gestures simula delle scorciatoie da tastiera che eseguono la funzione, inutilizzabile. Parlando con altri utenti hackintosh ho saputo che per far funzionare voodoops2 in realtà bisogna anche patchare il dsdt (o ssdt,non ricordo) per ottenere delle gestures ottime, il problema è che io non sono minimamente capace, o provato a googlare e ad applicarmi ma non ci sono riuscito. Qualcuno può aiutarmi/fornirmi soluzioni alternative? Grazie in anticipo. (In allegato nel link di drive la cartella EFI in quanto pesa troppo per essere allegata con la funzione del forum) https://goo.gl/UkBgfm
Hi Everybody!! After messing around with many linux Distros, i've recently been attracted from the OS X, and wanted to get it working on my notebook. After many tries, following lot of different guides (non3 of them completely working to say the truth), I finally managed to install Lion 1.7.2 on my fresh Acer M3. The point of this Thread is help someone elsa with my hardware to accomplish this goal and, hopefully, get some help to make things works better (well, in some cases, just make them work would be enaugh :wink2:) see signature for complete hardware specs, anyway these are the main characteristics: Acer Mother board model MA50_HX (Bios: Insyde corp v1.08) Core i3-2377M Built-in HD3000 + nVidia Optimus discreete card nVidia GT640M Atheros AR9462 + NetLink BCM57780 Gigabit Ethernet PCIe Standard PS\2 built-in Keyboard + Elan PS\2 Port Smart Pad I've to say that I'm quite good at linux, but completely new to OSX so I'm just starting to understand Kext, smbios and so on... What i've used: 8gb USB stick iAtkos L2 dmg Chimera BootLoader (without this, touchpad isn't recognized during installation) Now that's what I've done: Downloaded iAtkos L2 dmg Installed it on VMWare (just to have a functional OSX for partitioning, restoring images etc), followed that guide that works really stright forward http://ilpico.it/wordpress/?p=2642 (It's in Italian, anyway if someone needs it I can traduce it) From Lion VMWare (or another working Mac OS), mounted the 8gb usb stick Entered Disk Utility, select the USB Stick, in "Partition" tab, selected 2 partition from the dropdown menu (i've used GUID partition table) Selected the first partition and changed size to something like 300-500MB, named it "boot" Selected the second partition and named it "iatkos" Partitioned the usb stick with this partition scheme. mounted iAtkosL2.dmg image in disk utility clicked on the mounted iatkosL2 image, and the in the expanded image Selected restore tab, dragged the expanded iatkosL2 image from the left inside the "source" field, dragged the "iatkos" partition inside the destination field. Proceeded to restore During the restore process, downloaded latest chimera bootloader pkg (i've used Version 1.9.2) When Restore process was complete (about 15-25min), opened the chimera pkg and then doble clicked the installer Proceeded througt the installation and changed the install destination to "boot" partition on my USB Stick When installation finishes, unmount partitions and rebooted At start up, selected the usb stick from boot menu In chimera boot loader, booted the iatkos image with -v GraphicsEnabler=No (otherwise the system tries to use the nVidia Card and cannot boot) Using chimera, when install screen arrives, touch pad was working, so proceeded trought the installation, initialized the partition i've wanted to use (i've used the whole 20GB SSD), selected only PS/2 Kext for making also the kayboard working. Also selected both Atheros driver but didnt' make my wifi card work. After install, booted in arch linux to remove every AppleIntelHD* and AppleIntelSNB* kext, otherwise boot hangs, even with GraphicsEnabler=No rebooted installation processes only for fixing permission trought disk utility Powered off and booted from SSD with GraphicsEnabler=No, this time i was able to reach the mail screen!! entered sytem setting -> chimera bootloader (or maybe it's called chameleon inside the system setting menu', dont remember right now), changed resolution to 1366x768x32, checked the "GraphicsEnabler=No" as boot option That's all, right now didnt apply any extra kext or smbios or dsdt. Now, that's wht's not workig, hoping some one can give me some good tips! - NETWORK: nor Atheros AR9462 nor NetLink BCM57780 Gigabit Ethernet PCIe get detected. Simply no network interface. (En0 not present). Any suggestion here?? I think for the atheros there isnt much we can do, but i think should be possibile to make the ethernet work! - GRAPHICS: Intel HD3000 is recognized as "built in graphics", with only 64MB of memory and no specific Kext used for it. How can I use the intel HD3000 kext and graphicsenabler=yes without having the system tryng to use the nVidia card??? Maybe romoving nVidia Kext and placing back intel HD and Intel SNB??? - INPUT: Keyboard it's ok, touch pad works with basic function (no gesture at all). anyway if I go in system settings -> touchpad, there's no device listed Anyone can suggest some fix for those problems? Should I fix my dsdt (if yes.... HOW??), should I use a smbios different from the stok one inside iAtkos (MacPro3,1)??? Hope this post will be usefull to anyone with this hardware configuration, and hope some good soul will help me fix these issues! Thank you in advance! PES
Hi guys, in my first hack in signature i have a Elan touchpad which work beautifully in OSX, as well as the laptops integrated keyboard. Thing is that for getting the brightness control keys to work i have to press Shift+Caps at the same time once and then it will work, by presing F5 and F6 similar to a real Mac, even across sleep. But upon reboot I have to press again Shift and Caps for it to work again, and that is a bit annoying to have to do every time I boot. Is there any way to create an Apple Script or a kext that would press Shift and Caps at the same time upon successful GUI initialization, like in the user log in part, or even after logging in?