Search the Community: Showing results for tags 'connection'.
Found 3 results
Hi guys, so I finally installed OSX Mavericks on my VMWare machine and things are looking ok apart from the network and the sound. During the initial installation, I had to choose "this computer will not connect to the internet" during the setup part where you choose internet connections and languages etc... as it just kept going back to the start of setup every time. I finally managed to get into OSX and now I need to find out how to get the network working so i can use the internet. I've attached a screenshot of what it looks like below in the network options: I've tried choosing bridge in VM Machine Settings but can't seem to get it working. Any ideas guys? Also, any ideas on the sound would be great too! Cheers!
bojarek8 posted a topic in OSx86 10.11 (El Capitan)Hi! I'm Kris! I hope my topic is in a good section. I am asking you guys for help in this difficult hackintosh problem. For a very long time I tried to solve it myself but I have no idea how I can solve this problem. Description of the problem My problem is that I do not have access to any apple service. I am unable to log into the App Store using my Apple ID. I am unable to log into iCloud account in system preferences. iMessage and Facetime also do not work. Messages that I get when I try to log in: "An error occurred during activation. Try again" in iMessage: "An error occurred during activation. Try again" in App Store: "This device or computer can not be verified. Contact the support department for help" in Face Time: "There was an error during activation. Try again" In summary, I am unable to log in to any apple network service. My Specification Motherboard: Acer MG43M Processor: Intel(R) Core(TM)2 Duo CPU E7600 3.06GHz Graphic card: Gigabyte GeForce 9600GT 515MB Wi-fi: TP-LINK TL-WN881ND Ethernet: (not supported) Audio: (rather, it is not needed here) Files: My config.plist: https://drive.google.com/drive/folders/1vlYJC329sz6yuTwFr-k0fOs3rfhKeI6l
Hello everybody, I finally managed to install OSX on my MSI CR700x laptop. Everything (well, almost…) works fine, except for the built-in Atheros AR9285 Wireless Adapter, on which the 802.11n connection is not working at all. (it acts like a b/g adapter with the difference, that it doesn’t even connect to n-enabled routers, even when the AP is set to be compatible. (bgn or gn mixed mode) When I search for a 802.11n network, it tries to connect with DHCP, but after a period of time instead of connecting it gets only a self assigned IP.(169.XXX etc.) If I select the DHCP with manual IP-adress option, and enter an IP corresponding to the router IP (192.168.1.1XX), it says that it’s connected, but there’s no internet connection at all. Same goes for it when I try the whole manual connection. The encryption may not be the problem(WPA2), because when encountering this problem I tried connecting to our n network with disabling security, or enabling only WEP, but connection was still not working. When the router is set to b/g mode, WPA2 works like a charm. I’m using currently this kext: http://www.osx86.net...do=file&id=2031 (tried also a few(2-3) others but those gave KP or didn’t work at all.) By the way, I had the same problem with Snow Leopard 10.6.3!(with other kext) My specs are: Installation method: iATKOS L1, (setup has been booted with "-v npci=0x2000" to avoid PCI Configuration Begin Error), Mac OS X 10.7.1 Model: MSI CR700X-023HU CPU: Intel Celeron Dual-Core T3000 @ 1.80 Ghz Chipset: NVIDIA MCP79 The System Information gives the following information:(my router is now set to 802.11bg mode) Software Versions: CoreWLAN: 2.0 (200.46) CoreWLANKit: 1.0 (100.43) Menu Extra: 7.0 (700.42) configd plug-in: 7.0 (700.57) System Profiler: 7.0 (700.3) IO80211 Family: 4.1.1 (411.1) WiFi Diagnostics: 1.0 (100.26) AirPort Utility: 5.5.3 (553.20) Interfaces: en1: Card Type: AirPort Extreme (0x168C, 0x1089) Firmware Version: Atheros 9285: 184.108.40.206 MAC Address: 00:25:d3:0b:48:04 Locale: Unknown Country Code: GB Supported PHY Modes: 802.11 b/g/n Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 Wake On Wireless: Supported Status: Connected Current Network Information: Szappan: PHY Mode: 802.11g BSSID: 00:27:19:dc:33:90 Channel: 6 Country Code: GB Network Type: Infrastructure Security: WPA2 Personal Signal / Noise: -48 dBm / -96 dBm Transmit Rate: 54 While reading this, I noticed, that among the supported PHY modes, 802.11n is listed, and the more important thing, that among the AR9285 Network card specs as well under the router specs the country code is GB (I assume this is Great Britain), while on the router configuration page (TP-Link TL-WR1043N, if this matters...), under Wireless settings, country is set to Hungary, and my ISP is also Hungarian. Also, when booting in verbose mode, I get a message like this: "ATHR: unknown locale: 60" (this doesn't cause any KP or similar) I hope somebody could help to find a solution...Thanks in advance!