Search the Community: Showing results for tags 'companion 2'.
Found 1 result
***************UPDATE 7/18/2015**************** WORKING -wireless with card found here (https://partstore.com/Part/Lenovo/Lenovo/20200480/Refurbished.aspx) And kexts in new kext pack from rehabman. Thanks to chuppiejones! -Battery stat (thanks to srinn for the DSDT edit!!!) -bluetooth OOB (no turn off option, might need work) -brightness and graphic acceleration -sound (with voodookext from rehabman) -touch/pen (with stock wacom driver from website) -Micro SD OOB -All USB ports OOB NOT WORKING -volume rocker (i got it to work with one click then after it doesnt work) -sleep (automatically wakes up) -SD fullsize (not recognized) The SD card not working seems like good news and bad news to me, the bad news, it doesnt work, the good news this might be the reason sleep isnt working either. So hopefully we can kill two birds with one stone. For this install I will be using two USB drives, one as an installer the second to install to. Alternatively you could create two partitions on the installer USB if its big enough (16gb or larger) and install to the second partition this however will slow down the install. Later when I have the install stable enough I will extend this guide to make it an internal multi boot guide. Also please note that the USB drive you use seems to be quite important. A fast USB3.0 drive is necessary for the computer to recognize it at boot otherwise it will always boot into windows. I had trouble with this and could only find a couple drives (very new) that would work, all my older drives werent recognized fast enough to load the clover boot menu. _____Creating USB INSTALLER_____ -Download yosemite from the mac app store - put a thumb drive into your mac and open disk utility. -Partition the drive as GUID with MAC os extended journaled format -name the drive Yosemite -open terminal and copy and paste this command sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume/Volumes/Yosemite --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --no interaction Installing clover Now open Clover_v2.3k_r3185 (the version im currently using and will include in the zip file), click Continue > Continue > Change Install Location Select the “Installer” partition you made. Click Customize Select Install for UEFI booting only select one theme ( I prefer bootcamp) Under Drivers64UEFI select -EmuVariableUefi-64 -OsxAptioFixDrv-64 -PartitionDxe-64 Then click install. Customizing clover with our files When its finished you will notice a new mounted partition/drive on your computer called EFI, this is the hidden boot partition of your installer drive. Navigate to EFI > EFI > CLOVER > kexts Paste the fakesmc kext included in the zip file into the "10.10" folder and the "other" folder. Navigate to the EFI > CLOVER > ACPI > Patched and paste all the .aml files from the DSDT folder in the included zip. Navigate to EFI > CLOVER and overwrite the current config.plist with the config.plist included in the zip file. Initial Install Once finished eject your newly made installer usb drive and plug it into the top usb port on your cintiq (this port seems to work best for me, but maybe im just crazy) Boot the device holding volume up to enter BIOS. In bios, go to the "boot" tab and disable all boot options but leave the first one as usb key. Have fast boot disabled. In "UEFI Hard Disk Drive BBS Priorities" make sure everything is disabled as well as in "Hard Disk Drive BBS Priorities. Im not sure this is all necessary but this is whats working for me. Save changes and exit. Essentially you should disable any internal drive from booting so it will look for your USB key. However I had issues and it kept booting windows anyway, mostly due to what I assume was a slow USB 2.0 drive. After switching to only USB3.0 drives and putting them in the top port, i didnt have the issue. Now when you boot the device it should load into the clover boot screen. Just select the installer and hit enter. This should boot into the OS X Yosemite installer without any issues. From here select the drive you want to install to. If you have to go into the disk utility and partition a drive. First boot up! Woohoo! When the install is finished the computer will restart. Boot back into clover this time selecting the new install. Download the most recent wacom cintiq driver for OSX and put it on your usb drive, install it and you should be good to go. I will update this with the different files as I make changes and get other things working. Keep in mind not all of this might be necessary and some of the options might not be the best in the config file. If anyone has any input feel free to let me know and I will update. Install pack version 3 7-18-2015 Added updated DSDT from srinn for working battery, removed acpiplatform kext Added kext files for working wifi with aftermarket card thanks to chuppiejones Companion2packV3.zip Install pack version 2 3-3-2015 ( OUTDATED ) Added sound and battery kexts. While i understand DSDT editing is the preferred method for battery to work, half way thru the process I found myself considering a gunshot to the face instead. I have some linux experience but it was just god damn frustrating and time consuming, especially knowing these kexts get the job done. If anyone wants to go thru with the DSDT edit for the battery I would gladly use/host it here with credit. Use kext wizard to install the kexts in the "kexts to install" folder, then repair permissions and rebuild caches. Companion2packV2.zip Install pack version 1 2-26-2015 ( OUTDATED ) Hey guys just wanted to set up a place holder for when I get the guide finished, but here is a video of me successfully running yosemite with full pen (prefpane, hotkey) and touch support!! really excited, finally seeing all the work i did for months on the previous model finally come to fruition is amazing!! Companion2packV2.zip