Search the Community: Showing results for tags 'HD4850'.
Found 3 results
Hello, fellow hackintosh...ers ! I'm coming to you with a bit of a problem that got me to scratching my head pretty bad, to the point that I now think I'm actually scratching my frontal lobe. A week ago, I decided I was done with my Snow Leopard setup that was back from... well SL years. So I decided it was finally time to upgrade to a more up to date version. And what's more up to date than Mavericks DP8 ? A friend of mine running it on his iMac told me it was practically a GM, and that it was stable enough for a daily use. After a bit of research I found out some people were already running DP8 on their hackintoshes and so there was no reason to think I couldn't. So I went and installed Mavericks with myHack, and the installation went very well. I had some problems with booting (Resetting IOCatalogue), spent a few days trying to resolve them, tried installing Mountain Lion instead, had the same problems, came back to Mavericks, had some problems again (mainly thinking my Radedon HD4850 was the problem), all the while learning a lot about hackintoshes and I finally was able to boot on Mavericks DP1 after using a proper DSDT file that was made for a motherboard fairly similar to mine (The DSDT file is the "F13" for a Gigabyte GA-P35-DS3R and my MB is the GA-P35-DS3). Happy with my Mavericks DP1 properly booting, I decided to download a combo update to DP8 after installing the Realtek81xx kext that enabled ethernet connection and install it. So now I have Mavericks DP8 installed on my computer, but when I try to boot, I get stuck with "Resetting IOCatalogue" (several minutes after the previous line, which is in most cases mounting another partition from the hard drive, right after "DSMOS has arrived"), the exact same issue I had before upgrading from DP1 to DP8, except now the solution I had for it is still in effect but the problem came back. As advised on many threads, I removed every ATI, IntelHD and nVidia kext from /System/Library/Extension, in vain, the problem remains. It may or may not be useful to point out that I first had a "Missing Bluetooth Controller Transport" issue that I resolved by deleting Bluetooth-related kexts (I have no use for it), and that I also added a MacPro 3,1 smbios.plist in the /Extra folder. My config : Gigabyte GA-P35-DS3 Intel Core 2 Quad Q6600 ATI Radeon HD4850 Err... that's it, pretty much. So, what's my move ? I fortunately have a Ubuntu setup with a Mountain Lion VM from which I can access and tinker with files on my Mavericks install. Thanks for reading ! EDIT : Oh and it goes without saying that I tried booting in safe mode, and the result was the same.
Hallo liebe Community, Ich habe folgendes Problem. Ich habe vor knapp einem Jahr versucht meine Grafikkarte mit verschiedensten Treibern für Snow Leo zum laufen zu bekommen, leider ohne Erfolg... Jetzt habe ich mich wieder motivieren können neue Lösungsansätze von anderen Usern auszuprobieren und es klappt wieder nicht. Also hat vielleicht einer von euch diese Karte: Sapphire HD4850 1GB und weiß wie man sie unter SL oder Lion zum laufen bekommt ? Wäre echt Super !
This card worked fine for me in Lion and I had to mess around with kext files less than I did to get it working in Snow Leopard. However, it's not working in Mountain Lion and the only way I can boot is with GraphicsEnabler=No (booting into safe mode doesn't work). Booting into verbose mode, startup hangs here: siocprotodetach_in6 utun1 error 6 (see attached image). I don't see what this error should have to do with the graphics card, so I'm wondering if there is some conflict rather than something directly related to graphics. Currently I have installed 4 kexts related to the card: ATI4800Controller (modified with my device ID, 9442), ATIRadeonX2000, ATIFramebuffer and ATISupport. I have tried mixing and matching these to no avail. The Controller and RadeonX kexts are from the 10.8 Exotic patch and I repaired permissions, etc after installing. The text before the "siocprotodetach_in6 utun1 error 6" error is not always the same but it always hangs right there if I don't use GraphicsEnabler=No. Finally, I tried booting with the string "ATIConfig=Cardinal" which led to the same error. Any ideas? Thanks in advance.