Search the Community: Showing results for tags 'ATX'.
Found 3 results
Hi! I'm planning on building a Hackintosh, and it is my first time building a computer from scratch. I have taken apart a computer and put it back together successfully quite a few times. Although I have no experience with Hackintoshes, I have been doing by reading. Anyways, I plan on building my Hackintosh into a PowerMac G5 chassis. I have little (very, very little) experience with rotaries and soldering, and no experience with hardware modding. These are the parts I plan on using: Intel DZ77GA-70K Motherboard EVGA GeForce GTX 660 SC 3GB (Yes) Intel Core i7-3770K Processor (Yes) Intel 330 Series SSD - 240GB LG BH12LS35 Lightscribe Blu-Ray Writer Corsair 500W Modular PSU Corsair Vengeance 8GB 1600MHz DDR3 RAM (Yes) Aluminum Apple Cinema Display 20" (Yes) Apple Bluetooth Module Apple WiFi-N Module (Yes) Feel free to make any suggestions as to the parts I'm using. What I'm mainly concerned about is the front and back I/O panel. Can somebody write a step-by-step guide as to how to make the case fully ATX-ready? Is there someone who could also make a cover for the bottom where it has to be cut, and make the cover look Apple-like? Thank you very much.
KEY FEATURES: - Modular PSU in G5 housing - Multi-bay 2.5" Drive Storage - Reusing Apple Case Fans - The Laser Hive Custom Motherboard Tray & Back Plate - Cable Sleeving & Wire Management PROLOGUE: This is my third Powermac G5 modification, and is the one that I have been most excited about! After my first G5 mod, I wrote the Ultimate G5 Resource Page (link) and was overwhelmed by the amount of views it has received. Many of the pageviews were returning visitors, which told me that people were coming back to it as a reference, and not just happening upon it via Google. After over a year of not touching a G5 (having sold both of my previous mods) I decided that it was about time that I got back in the game, hopefully to bring some fresh content and tutorials to those venturing into the G5 modding world! SPONSORED MOD? A sponsored mod is one where manufacturers or individuals contribute parts/components/supplies to a case mod project. It benefits them by bringing attention to their products in a (some might argue) saturated market, and obviously it helps take some of the financial burden off of me. I am still finalizing the list of sponsors for this project, and will update this section once that is done. I would like to thank all the people who believed enough in my modding abilities to help support me in this mod, without you, this literally wouldn't have happened! Icy Dock (www.icydock.com) Components Provided: ToughArmor MB996SP-6SB 2.5" Drive Bay (link) I think I am most excited about this part of my G5 case mod. Drive storage is always a bit of a tricky one, and I'm positive that this drive bay will be the perfect solution. It normally goes in a 5.25" slot, and can store up to 6 hot-swappable 2.5" drives! Now that 1TB 2.5" drives are only running at around $70, an all-2.5" solution was a no brainer! Vantec USA (www.vantecusa.com) Components Provided: 2 x 120mm Stealth Case Fans (link) When modding the G5, the loudness of your chosen fans is pretty darn important - you can almost consider the entire case to be open-air with that mesh! I chose the Stealth fans because they push a lot of air at a very unimposing 20dBa! Arctic Cooling (www.arctic.ac) Components Provided: Freezer i30 Enthusiast-grade CPU cooler (link) With four direct touch copper heat pipes and a monster heatsink, this is a beast of a CPU cooler that has been scoring high marks across the web in reviews. Did I mention it runs about 70% quieter than the stock Intel cooler? The Laser Hive (www.thelaserhive.com) Components Provided: mATX motherboard tray and back plate (link) If there's one thing I love about the hackintosh community, it's the general spirit of ingenuity! David from The Laser Hive is a perfect example of this, and has several very creative and professionally executed solutions for the G5, and his flexibility and willingness to work on an individual basis means that I can highly recommend his products! Alohacab (forum thread) Components Provided: G5 front panel ATX Cable (link) Very much along the same lines as The Laser Hive products, Alohacab is one of the few people in the hackintosh community selling quality accessories that make the lives of G5 modders that much easier! If you don't feel comfortable with a soldering iron and pinout diagram (or maybe you just want to save some time), Alohacab offers a professional-looking cable at an affordable price. COMPONENT LIST: To be decided. I do know that I will be including: - 2 x 240GB Chronos Deluxe Mushkin SSD (link) - 2 x 1TB Samsung Spinpoint 1TB 2.5" HDD (link) - AlohaCab's Front Panel Cable (thread link) - The Laser Hive motherboard tray and back plate (link) - Apple Bluetooth Module (guide) - Apple Wi-Fi Card (guide) - Apple Chime on Startup (guide). TO DO LIST: - Tear down case (done!) - Clean case as best as possible (done) - Decide what original parts I want to keep - Decide what solution I want to use for the motherboard (done) - Decide what to use for HDD storage - Gut Powermac PSU, ready for modular ATX power supply - Wire Apple fans for 5V (quieter) - Cut back panel opening UPDATES AND FINAL PICS: Forthcoming.
I am currently working on a G5 ATX conversion but I have one thing which I yet have to decide. I really want to keep the stock look on the back of my G5. But the problem, of course, is the fact that fitting the motherboard directly to the back of the case will force you to cut out space for the motherboard I/O panel. Thinking of this, I came up with the idea of placing the motherboard slightly to the front of the case (so the PCI cards will not be mounted directly to the rear slots). When a GPU is installed, I could simply use a DVI bracket with a DVI extension cable attached to extend the video output to the rear slots. Common version Alternative A DVI bracket: This might work, although I have two major concerns: - I am planning to use a high power GPU (ATI HD5850) in this build. The GPU blows out it's heat at the back of the card, through its mounting bracket. When placing the back of the GPU in the case, the GPU may not be able to blow all it's heat out of the case. This may be solvable by making a air duct which extends to the back of the case to guide the heat out of it. I would also replace the stock expansion slot brackets with ones with ventilation holes. - Is it okay to fit a pretty heavy GPU just to a PCIe-slot, instead of also attaching it with a screw to the case? I'm slightly worried about the amount of weight which will be put on the motherboard because the GPU is not attached to the case itself. I am planning on using a Gigabyte M-ATX motherboard with this build. I would really appreciate any feedback, thanks in advance!