Search the Community: Showing results for tags 'alpine ridge'.
Found 2 results
First Hackintosh ever and first PC build in a very long time. Initial setup worked OOB, but tweaking—especially Thunderbolt—was somewhat painful at times. I hope this helps others too I set this up for video production and image processing, not for gaming, so some parts of the system might look wimpy and others will be overkill. Also, I plan to dial back some of the overclocking; these settings are as far as I could go. The links are meant to see the exact same product as I used, but are not affiliate links—nor do I endorse anything. I'm just sending you to places where you can see what I tried and used. CoffeeLake 8700k (5.4 GHz multi-core O.C.) GeekBench scores Single-core / Multi-core 7,153 / 33,395 (all-time high: 34,110) GTX1080 w/ UHD630 OpenCL 182,576 Metal 193,459 CUDA 226,413 Cinebench R15 160 fps / 1,744 cb / 229 cb LuxBall (default compiler settings) 20,935 Heaven / Valley Note that all numbers vary a little on each run. Also, my system is not “bare bones,” and I have schedulers and extensions running in the background, which can influence results as well. Cf. screenshots for multiple runs. Core Build Intel Core i7-8700K Coffee Lake 6-Core 3.7 GHz (4.7 GHz Turbo) LGA 1151 (300 Series) 95W BX80684I78700K Desktop Processor Intel UHD Graphics 630, https://www.newegg.com/Product/Product.aspx?Item=N82E16819117827, $389.99 Gigabyte Z370 AORUS Gaming 7 rev. 1.0 BIOS F5h, https://www.newegg.com/Product/Product.aspx?Item=N82E16813145036, $219.99 G.Skill TridentZ 4x 16GB DDR4 CL16 — F4-3200C16D-32GTZSK, https://www.newegg.com/Product/Product.aspx?Item=N82E16820232415, $479.99 (total), O.C. at 3300 EVGA GeForce GTX 1080 FTW2 Gaming iCX 11GHz — 08G-P4-6686-KR, https://www.newegg.com/Product/Product.aspx?Item=N82E16814487319, $549.99, top PCIe 16x slot — O.C. 2113 MHz (see note below) Fenvi FV9801 802.11AC WiFi / Bluetooth PCIe card, https://www.amazon.com/gp/product/B0734FNBW8/ref=oh_aui_search_detailpage?ie=UTF8&psc=1, $17.99, middle PCIe 1x slot Expanded Build Vantec 2 Channel 4-Port SATA 6Gbps PCIe — UGT-ST622, https://www.amazon.com/gp/product/B008AEBY1W/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1, $20.60, top PCIe 1x slot Gigabyte GC-Alpine Ridge Thunderbolt 3 PCIe, https://www.amazon.com/gp/product/B019955RNQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1, $70.00, bottom PCIe 16x slot — has to go there and no where else; invalidates lower M.2 slot. Overclock Settings (Delidded CPU) Dr. Delid PROFESSIONAL tool for Kaby Lake, Skylake und Coffee Lake processors, https://shop.aquacomputer.de/product_info.php?products_id=3663, $35.20 Arctic Silver Arcticlean Thermal material Remover & Surface Purifier ACN-60ML (2-PC-SET), https://www.newegg.com/Product/Product.aspx?Item=N82E16835100010, $8.99 Thermal Grizzly Conductonaut Thermal Grease Paste - 1.0 Gram, https://www.amazon.com/gp/product/B01A9KIGSI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1, $14.89 Gorilla Super Glue Brush & Nozzle, 10 g, Clear, https://www.amazon.com/gp/product/B01A7AVQKA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1, $3.19 BIOS Settings cf. screenshots; I have deliberately not included full O.C. settings; for the record, this is not something that I encourage and I am therefore not responsible in any way, shape, or form for any bad outcomes you may experience. Just sayin’… Drives - Boot Samsung 960 EVO NVMe M.2 PCIe 1TB — MZ-V6E1T0BW, https://www.newegg.com/Product/Product.aspx?Item=N82E16820147595, $399.99, boot with MacOS, top M.2 slot under thermal shield WD Blue 3D M.2 SATA 500GB — WDS500G2B0B, https://www.newegg.com/Product/Product.aspx?Item=N82E16820250091, $164.99, boot with Win10, middle M.2 slot LG 14x SATA Blu-Ray internal burner OEM — WH14NS40, https://www.newegg.com/Product/Product.aspx?Item=N82E16827136250, $19.99, to boot with CDs Drives - Other Toshiba OCZ RD400 NVMw M.2 PCIe 256GB — RVD400-M22280-256G, https://www.amazon.com/gp/product/B01G3HLP0C/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1, $134.99 Samsung 850 EVO 500 GB SATA III — MZ-75E500B/AM, https://www.newegg.com/Product/Product.aspx?Item=N82E16820147373, $129.99 Toshiba X300 6TB SATA Internal, https://www.newegg.com/Product/Product.aspx?Item=N82E16822149629, $169.99 StarTech USB 3.0 Internal Multi-Card Reader with UHS-II Support, https://www.amazon.com/gp/product/B011NLXC5O/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1, $29.36 StarTech 3.5-Inch to 5.25-Inch Floppy Mounting Kit Bracket (Black Plastic), https://www.amazon.com/gp/product/B000HLZXH2/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1, $6.26, needed to install Multi-Card reader COSMOS desktop computer ATX/MATX companion, blank drawer rack (5.25"), for computer accessories/storage devices, https://www.amazon.com/gp/product/B006VAD2C6/ref=od_aui_detailpages00?ie=UTF8&psc=1, $11.74 Case / Power / Cooling Corsair Carbide 330R Titanium Edition CC-9011071-WW Black Steel, https://www.newegg.com/Product/Product.aspx?Item=N82E16811139053, $79.99 Corsair Carbide Series 300R Left side panel with dual 120mm/140mm fan mounts, black, http://www.corsair.com/en-us/300r-left-side-panel-with-dual-120mm-140mm-fan-mounts-black, $9.99 Corsair HX1200 Platinum — CP-9020140-NA, https://www.newegg.com/Product/Product.aspx?Item=N82E16817139205, $179.99 (overkill, but I got a deal on it) G.Skill FTB-3500C5-DR, https://www.newegg.com/Product/Product.aspx?Item=9SIA1K64263994, $20.74, on DDR4 Corsair Hydro Series H115i Extreme Performance Liquid CPU Cooler, w/ Liquid Metal (see Delid note), https://www.amazon.com/gp/product/B019955RNQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1, $139.99, under top lid Corsair ML140 CO-9050044-WW 140mm Premium Magnetic Levitation PWM Fan BLACK (2-Pack), https://www.newegg.com/Product/Product.aspx?Item=N82E16835181111, $29.99 3x Phanteks PH-CB-Y4P 4.3" 4 Pin PWM- Y Splitter Fan Cable Female to Male, https://www.newegg.com/Product/Product.aspx?Item=N82E16812987008, $14.97 (total) SilverStone 140mm Fan Filter with Magnet for Case Fan/Power Supply Fan and Panel Air Vent FF141B (Black), https://www.amazon.com/gp/product/B004GGUASG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1, $10.97, screwed onto the outside of the ventilated 300R panel SilverStone 21-Inch x 15-Inch 4mm Thick 2-Piece Sound Dampening Acoustic EP0M Silent Foam SF01 (Black), https://www.amazon.com/gp/product/B0040JHMH6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1,$15.99, stuck on inside of 300R ventilated panel for sound proofing (original 330R panel has foam on it) 6 x 140mm Corsair fans (including H115i), 1 x 120mm Corsair fan, PSU has own built-in fan Mistakes / Lessons Learned CORSAIR Hydro Series H60 (CW-9060007-WW) High Performance Water / Liquid CPU Cooler. 120mm; not a real mistake, but I got a better deal on the H115i, which has a very high thermal capacity, so I decided to future-proof. WBTUO LM900 Micro USB3.0 TO M.2 PCI-E SSD Enclosure NGFF M-KEY PCIE Support AHCI for 2230 2242 2260 2280 SSD; I got it for an extra M-key PCIe SSD that I had. It turns out that this item cannot host NVMe, which wasn’t stated up front. PwrLink Adpt Graphics Cd Acces 600-PL-2816-LR ; angled power-bracket for EVGA 1080, worked great with regular 330R panel, but when I decided to install a ventilated 300R panel with fans, the bracket and the fans interfered. So I took it out. The bottom PCI 1x slot shares/blocks a SATA connector. That is not documented in the manual and I therefore got the Vantec card to compensate for the lost SATA Ports Installing the Alpine Ridge card essentially voids the lower M.2 slot. It should share bandwidth, but apparently the Alpine Ridge card only runs at 4x, so you have to leave the lower M.2 slot empty for Thunderbolt to work. Installing a USB 3.1 Gen 2 header cable (https://www.newegg.com/Product/Product.aspx?Item=9SIAE4P6PP9074) will deactivate Thunderbolt. Not only that, it will reset any driver memory. If you have Thunderbolt working, do not touch that connector. Just don’t. Mailiya PCI-E to Type-C + A 5-Port USB 3.0 PCI Express Card and 15-Pin Power Connector, Mini PCI-E USB 3.0 Hub Controller Adapter with Internal 20-Pin Connector; https://www.amazon.com/Mailiya-Express-Connector-Controller-Internal/dp/B01MQ5R7I1; crashed MacOS or isn’t recognized at all, depending on BIOS settings. Uses NEC uPD720201 chipset. ORICO USB 3.0 PCI Express Card Hub Controller Adapter Card with 2 Rear USB 3.0 Hosts and Internal USB 3.0 with 15PIN Power Connector, https://www.newegg.com/Product/Product.aspx?Item=9SIA1DS0DV6321; crashes windows at boot with blue screen; ORICO paid lip service and were useless. Likely uses ViaLab VLI chipset. SilverStone USB 3.1 Gen 2.0 PCIe with internal 19-pin connector — ECU05, ˚https://www.amazon.com/gp/product/B01HZ0XVJO/ref=od_aui_detailpages00?ie=UTF8&psc=1, $47.99, middle PCIe 16x slot (needs 2x slot or above, based on ASMedia ASM1142 controller) needed to power multi-card reader in addition to Carbide 330R front panel ports. Great card, highly recommended, but in my case, it took a slot that dropped the GPU to 8x, so I had to find a 1x PCI solution. Thunderbolt: boot into Windows and connect a Thunderbolt device; I used an OWC TB 2 dock. When recognized, reboot into Mac OS X; I used a G-Drive TB 2 drive for that, as the OWC didn’t show up. Once the G-Drive showed up, I was able to hot-add the dock. No issues since (aside from using the internal USB 3.1 Gen 2 header, which led to a big mess; see next item). Note that if you disconnect the computer from power, you will have to boot into Windows again and connect a Thunderbolt device again prior to booting into Mac OS X. Chenyang USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm for ASUS Motherboard, https://www.newegg.com/Product/Product.aspx?Item=9SIAE4P6PP9074&ignorebbr=1, $18.88; replaced SilverStone board for internal 19-pin, freeing up one 16x PCIe slot. This disables the Thunderbolt header, as reported in other forums (and if you even try that port, you will have to go through the whole Thunderbolt install process again…). I also tried a header splitter cable, https://www.moddiy.com/products/20%252dPin-USB-3.0-Internal-Header-Y-Splitter-Cable-%2812cm%29.html, but that didn't work either. Systems / OS MacOS 10.13.2 [17C205] “High Sierra” — all Mac drives are Journaled Extended MacOS (JHFS+); no APFS. [uPDATE: now on 10.13.3 [17D47; see below about issues] Windows 10 Pro 64-bit Clover Clover Bootloader 2.4 4269 [uPDATE: now 4380 and OsxAptioFix3Drv] Clover Configurator 18.104.22.168 Running as: iMac 18,3 EFI attached (sans Serial #) To get TB running without boot process freezing, I had to add: Remove EmuVariableUefi Connect only one screen (add all you want later) Acpi: FixRegions: True Boot: slide=0 [KSLR disabled] Manual addition of kexts to 'other' folder. Other Tools that Saved my Skin SoftRAID, https://www.softraid.com, for my external RAID5 backup server. DiskWarrior, https://www.alsoft.com/DiskWarrior/, as I had quite a few corrupted directories during crashes. Also, the main reason I will not switch to APFS for now. Kexts (all in EFI/Clover/kexts/Other) [uPDATE: Since then running all latest versions; will not not be updating this list] AppleALC.kext 1.2.2 AtherosE2200Ethernet.kext 2.2.2 CodecCommander.kext 2.6.3 FakeSMC_ACPISensors.kext 6.26-322-g1b20eab7.1765 FakeSMC_CPUSensors.kext 6.26-322-g1b20eab7.1765 FakeSMC_GPUSensors.kext 6.26-322-g1b20eab7.1765 FakeSMC_LPCSensors.kext 6.26-322-g1b20eab7.1765 FakeSMC.kext 6.26-322-g1b20eab7.1765 IntelGraphicsFixup.kext 1.2.1 IntelMausiEthernet.kext 2.3.0 Lilu.kext 1.2.1 NvidiaGraphicsFixup.kext 1.2.1 RealtekRTL8111.kext 2.2.1 Shiki.kext 2.2.0 USBInjectAll.kext 0.6.2 XHCI-200-series-injector.kext 0.5.0 Works WiFi Bluetooth (with Apple keyboard and MagicTrack Pad 2; see note below) Logitech Anywere MX mouse (with receiver) UHD630 Acceleration (see image) Audio (back panel and front panel) USB 3.0; tested with BlackMagic Disk Speed Test and Samsung Portable T3 SSD 1TB iMessage iCloud FaceTime Continuity / Handoff AppStore Universal Copy/Paste Eject key with DVD reader Thunderbolt Dual Boot Power Management UPS (mine is a CyberPower) Not Working Overclocking on EVGA 1080 FTW 2; see note below. Cannot get a signal on the iGPU connectors (in ig-platform 0x5912000 config); ghost monitor appears in Displays and monitor turns out, but remains dark. Currently running with ig-plaftform 0x5912003. PCI boards shows as pci8xxx in Profiler; no names. Don’t think GPU shows either. Thunderbolt does not appear in profile. 10-bit display; perhaps need Vega FE for that. [uPDATE: added a Quadro P400; all good now with OpenGL display] Jury Still Out Sleep / Hibernate; the System Preferences : Energy panel is rather minimalistic. For example, Power Nap doesn’t show up. [update: was told that that might be because I am connected via Wi-Fi and not RJ45; either way, I don't need it and set Darkwake=no] USB ports; still have to map out unused out; my Anker USB hub shows as a 2.0, but I thought it was a 3.0. Need to investigate that further. [update: hub works fine; what I was seeing was—correctly—a USB 2.0 device plugged into it; 3.0 devices work as they should.] Booting with all 3 monitors on sometimes causes the 1080 to flicker and then hang. If I boot with two of them and then turn on the SW320 after login (I can leave it connected though), all is fine. Notes TrackPad 2 doesn’t allow me to tap-drag. I can double tap, but I have to click-drag. NVIDIA 322.214.171.124.25.104 & CUDA 387.99. Installed NVIDIA web drivers using SIP procedure. Later installed CUDA 8.x and updated through CUDA System Pane (Control Panel). [uPDATE: Updated MacOS to 10.13.3 and driver 156; hangs on boot; reverted to 104 with nvdiaweb_patcher and all good now; even recognized both Quadro and GeForce] Pump was configured with CorsairLink in Windows and settings saved to device. Works for me, but use at your own peril! EVGA 1080 apparently doesn’t store OC settings in memory; you have to either ( a ) reset every time or ( b ) flash to BIOS. For ( a ) there is no software that I can find for MacOS; maybe someone knows how to port Nvidiux or similar utilities for command-line setup. For ( b ), NVIDIA apparently have locked Pascal boards for BIOS mods, so you can’t set up the board in Windows, flash it, and maintain settings in MacOS X. Benchmarks, snapshots, BIOS settings (partial), and config (serial changed) are attached. Many thanks to @joevt for advice and ideas while dealing with Thunderbolt and to @glasgood for a terrific guide when it came to fine-tuning. config-changed serial.plist.zip
Haive_Music posted a topic in General DiscussionHey guys, I'm really hoping someone has the experience and ability to help me iron out the last remaining issue on my build. The motherboard is: Gigabyte Z370 Aorus Gaming 7 and I'm running a Alpine Ridge thunderbolt card (Revision 2). I've gotten everything working for the most part with the exception of Thunderbolt hotplug. This is the last piece of the puzzle. I've tried so many different DSDT/SSDT's, cable plugged in, and unplugged, without any luck at all. I've managed to get my Focusrite Clarett 8Pre Thunderbolt working and it's showing up under the PCI section. It works great, until I shut the device off and turn it back on. I'd really like to try to get this hotplug issue sorted out, but I've had absolutely no luck so far. I've managed to get the Alpine Ridge NHI and USB controllers showing up in the PCI section too, but for some reason, the USB lists a bunch of ',,,,,,,,' after the name. I'll be the first to admit - I don't really know a whole lot about what I'm doing with this stuff, but I've attached relevant files in hopes someone more experienced and knowledable can help me get this working. Thanks guys! config.plist DSDT.aml John’s iMac.iojones SSDT-TB3.aml