Jump to content


  • Content count

  • Joined

  • Last visited

About meww

  • Rank
    InsanelyMac Protégé
  1. i need the AppleACPIPlatform.kext and IOACPIFameily.kext from the new jas release. thnx in advance
  2. when i put in my installation disk i type -v and an error comes up saying unknown SIGFPE code 1, subcode and then it just stops
  3. dell d600 kalyway 10.5.2

    if anyone here has a dell d600 could you tell me what your bios settings are set to
  4. im trying to install kalyway 10.5.2 on a dell d600 but the problem is that after i select my language the preparing installation bar doesnt move i have no wireless card or a battery or a modem it is something in the bios because it worked before but i dont remeber what it is
  5. Kalyway does not require ACPI to be turned on in order for connect drive to be recognized by OSX, GUID partition is nice cause it lets you resize partitions with destroying existing stored information on it.
  6. Question: 1. do you have any PCI device beside your PCI Express video card I only have Videocard installed 2. rm -rf /Volumes/OSXDRIVE/System/Library/Extensions/AppleEFIRuntime.kext (what's the purpose of deleting this file?) I always removed that file because that file used to cause kernel crash on my old system. Just to be on safe side I remove it. dsmos.kext replaces it, so it is not needed. Also, Ethernet does not work out of box. You need a 8111B driver. My ethernet work fine. We got good trade off. You got sleep, I got shutdown hahahaha
  7. Using EFI_V8 + Vanilla Kernel + Reboot + shutdown work. Sleep does not work ( It goes into sleep mode by does not wake up) My System Specs : Gigabyte GA-P35-DS3L Rev. 2.0 Q6600 Quad Core Processor 2.4ghz but Overclocked to 3.0ghz GSkill PC6400 @800MHZ 2 x 2GB Liteon 20x Sata DVD Copier 400gig Seagate IDE hardrive MSI 8600 GTS OC Edition Video Card I used Kalyway 10.5.1 for my installation cause it is the best one out there. Step 1: Installing Kalyway 10.5.1 1) Setup Your Bios to Boot from CD-ROM Drive, With kalyway you don't need to turn on ACPI in the bios 2) Once the Kalyway is boot , select utilities from the top menu 3) Format your hardrive with MBR and name it what ever you want, Once done close it and move on with the installer ( Mine is called Leopard ) 4) Next select the hardrive you want install Leopard on ( Choose the one that you just formated and labeled ) 5) Now we want to customize the installation so select that 1) Select Vanilla Kernel 2) Select ACPIPlatform fix ( WARNING THAT ONCE YOU SELECT THIS OPTION THE PS2 KEYBOARD and MOUSE DONT WORK WHEN YOU GET INTO LEOPARD, SO USE USB KEYBOARD AND MOUSE ) YOU NEED TO SELECT THIS TO GET RESTART WORKING 3) Select EFI Emulation and choose EFI with MBR 4) Don't select any ethernet, audio or video card driver because we are going to install them later manually ( Ethernet work with no need for extra kexts) 6) Hit the install button and skip disk check. 7) Before you reboot the machine from the installation menu 1) Open up terminal and type these in rm -rf /Volumes/OSXDRIVE/System/Library/Extensions/AppleEFIRuntime.kext exit and close 8) Now you can reboot Step 2: Setup up Leopard 1) System will reboot, so take the install disk out of the CD-ROM drive and let leopard boot up from hardrive 2) If you using ps2 keyboard it will not work so get youself a usb keyboard 3) Do you thing with setting up leopard by creating user name , etc ( if you want to skip registration hit windows key + q then skip ) 4) First thing is that we want to remove all the program that Kalyway can with and the orange directory background. A nice person on the forum made virginizer so let use it Download it from here http://forum.insanelymac.com/index.php?showtopic=77479 This program remove all the program and resets leopard to original state To change the orange color from the backfrom of directory Right click ----> show view options -----> Backround (white ) ----> set to Default 5) Reboot the system and now we can install the drivers for video and audio 1) I will cover how to install 8600 GTS cause that is what I have Simply download this installer, run it and reboot and you have OE/CE Dual Monitor Working http://forum.insanelymac.com/index.php?showtopic=78033 2) Reboot and now we gonna install the audio driver ( AL888) HDA_ICH9_ALC888.zip alc888.txt AppleHDAPatcherv1.20.zip 1) Download the file files above and extract them on you desktop First we are going to install the AppleHDA.kext , NVinject.kext 2) Open up terminal and type the following sudo -s enter password rm -rf /System/Library/Extensions/AppleHDA.kext cp -R ~/Desktop/AppleHDA.kext /System/Library/Extensions/AppleHDA.kext chmod -R 755 /System/Library/Extensions/AppleHDA.kext chown -R root:wheel /System/Library/Extensions/AppleHDA.kext rm -rf /System/Library/Extensions/NVinject.kext cp -R ~/Desktop/AppleHDA.kext /System/Library/Extensions/NVinject.kext chmod -R 755 /System/Library/Extensions/NVinject.kext chown -R root:wheel /System/Library/Extensions/NVinject.kext reboot the system 3) You should have audio working now but we want digital audio working so here how to do that. 1) Open applehdapatcher 2.0 and extract it on desktop. You should have icon with a aligator on it 2) drag the AL888.txt file to the alligator icon and follow the instructions (don't open the applehdapatcher program, just drag the txt file into the icon ) 3) reboot Well now we have video, audio, Virgin Leopard with vanilla kernel + reboot Step 3: Only thing left is shutdown with was little tricky but read forums for hours and hours finally found it. 1 ) Reboot the PC 2) Enter the Bios 3) Power Management Setup 4 ) Soft-off by PWR-BTTN ------> change that from Instant-Off to 4 sec delay 5) hit f10 save setting and reboot 6) You Should have shutdown working now This is my first guide so any comments are more than welcomed and if you see anything wrong please let me know Thanks You
  8. IT WORKED!!!!!!! Sweet man Thank You. OSX shutdowns completely, I have a Gigabyte GA-P35-DS3L motehr board with Q6600 processor
  9. http://forum.insanelymac.com/index.php?sho...&start=1480 go here and follow the guide and you will be able to 8800gt fully working. If you can't get into leopard well try safe mode or using you install disk load up terminal remove all existing nvidia drivers and replace the file from the guide. If that guide does not work search that forums alot of people got there 8800gt workinghttp://scottdangel.com/blog/?p=15 here is installer some one made up so noobs can install. If you can get in to leopard with same mode you can use that installer to get QE/CE support smile.gif
  10. where can i get darwin kernel 9.1.0

    use irc and go to irc.osx86.hu and join #10.5 , The kernels are listed in the topic
  11. Help with Hyperthreading

    here follow this guide and it should work http://forum.osx86scene.com/viewtopic.php?f=16&t=2727 make sure u backup AppleSMBIOS.kext and Powermanagemtbundle so if you mess up u can go back and fix it
  12. CPU = Pentium 4 3ghz, MOBO = MSI 865PE NEO2-V, Sound Card= Realtek ALC655, Lan = Realtek 8100C, GFX= Geforce fx 5200
  13. I will add my hardware soon as I get home, I am at work right now
  14. Hey I just finished installing leopard on my pc using TOH install dvd RC2. Well everyting is working fine, I have full video with QE/CE, full sound, lan. So everyting works. Now I have couple of questions. 1) What in the world is EFI and do I need to worry about that? 2) What is vanilla kernal do I need to use it? 3) When i go to shutdown the pc the os shut off but the pc stays on, is there a fix for that? 4) This is on that is pissing me off, When I click on (About my Mac) icon to display my system properties the OSX restarts it self. I dont know why it is doing that. If any one could help with that please.