Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

RustyRussian

Members
  • Content count

    1
  • Joined

  • Last visited

About RustyRussian

  • Rank
    InsanelyMac Protégé
  • Birthday 03/01/1981

Profile Information

  • Gender
    Male
  • Location
    Greater Los Angeles Area
  1. If you have an Ivy CPU with a 6-series board (rare) or a Sandy CPU with a 7-series board (not as rare), you'll probably have difficulty reaching the installer even if you provide the correct "ig-platform-id" or patch the DSDT. The graphics drivers are dependent on the driver for the Intel MEI device. Apple put the MEI driver for the 6-series boards is in the same kext as the HD3000 controller, and the MEI driver for the 7-series boards in the kext for HD4000 controller. This is why it is impossible to load the framebuffer from the HD4000 controller, using the MEI for a 7-series board, when you have a HD3000 controller on a 7-series board. Similarly, it is not possible to load the framebuffer from the HD3000 controller, using the MEI for a 6-series board, when you have a HD4000 controller on a 6-series board. You can fix the IMEI with the Clover EFI bootloader and patch the AMD Controller/Framebuffer in some cases. Assuming that you have both a HD4000 and Radeon HD controller, you might just consider disabling the discrete GPU capabilities completely. As for the Radeon HD, it is always a "shot in the dark" getting them to run properly. Even when you decode the VBIOS, and patch the right framebuffer in the AMDXXXXController, there are several different chipsets in the same series. If you get the right Intel Management Engine, the right framebuffer, and the right ASIC chipset architecture you'll have full QE. Forcing your GPU to run a different architecture, and having an incomplete EDID, will give you graphical anomalies. ATOM BIOS Rom: SubsystemVendorID: 0x1043 SubsystemID: 0x2001 IOBaseAddress: 0xd000 Filename: k53y0524.001 BIOS Bootup Message: Asus K53LY SEYMOUR M2 XT DDR3 PCI ID: 1002:6760 Connector at index 0 Type [@offset 44786]: LVDS (7) Encoder [@offset 44790]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 44860]: 0x96, OSX senseid: 0x7 Connector at index 1 Type [@offset 44796]: HDMI-A (11) Encoder [@offset 44800]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 44883]: 0x91, OSX senseid: 0x2 Connector at index 2 Type [@offset 44806]: VGA (1) Encoder [@offset 44810]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 44910]: 0x97, OSX senseid: 0x8
×