Jump to content
InsanelyMac Forum

raj47i

Members
  • Content count

    17
  • Joined

  • Last visited

About raj47i

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
    Male
  • Location
    Kerala, India
  1. Gtx780 or gtx780ti for second gpu for video editing

    Are you sure it is EVGA GeForce GTX 780 Ti Superclocked (03G-P4-2883-KR)? Could you please take a look at # http://www.insanelymac.com/forum/topic/298105-getting-hd4600nvidia780ti-dual-monitor/ and help me to get mine working?
  2. Gtx780 or gtx780ti for second gpu for video editing

    Be careful with them, mine is an EVGA GTX 780 Ti SuperClocked, And So, far I was not able to get it working on 10.9 - any versions with any versions of nVidia Web Driver.
  3. Getting HD4600+nVidia780Ti Dual Monitor

    :-( No one can help me with this ? Could anyone atleast confirm if EVGA 780Ti SC works with Hackintosh ? I tried unplugging both monitors and plugged the DisplayPort cable to 780Ti, with Inject-Intel false and Inject-NVidia True, and it got stuck in the start up screen with apple logo. On Verbose, message was: GeForceSensors (pci1): chipset: GK110B (NVF1) bios: 80.80.30.00 GeForceSensors (pci1): started
  4. Getting HD4600+nVidia780Ti Dual Monitor

    Have already tried that. Without Injection, It won't detect my card.
  5. Hello, My rig is: i7 4770K + Asus Sabertooth Z87 + 32GB Dell IPS Panel on Displayport of Motherboard (HD4600) Benq LED Panel on HDMI of EVGA 780Ti SC Clover UEFI upto date ! Mavericks Installed 10.9.0, upgraded to 10.9.3 HD4600 is working mostly okay (HDMI/DP Audio is not working), Intel Inject enabled with Clover. Its working superbly, except that my 780Ti is of no use. My Questions: Can I get 780Ti to run the 2nd display on Mavericks? What fix/kexts do I need to install? Do I need nVidia Web Drivers? I have only tried the HDMI on the 780Ti (DVI / DP cables not with me atm), Is there any inject/patch required for the HDMI to work? Attaching my clover config.plist & graphics info! config.txt
  6. Mavericks AppleHDA HDMI Audio

    :-( Is there no way for me to use Injected Intel Graphics inClover with the SSDT for HDMI Audio? I will need to patch the DSDT every time I update bios, right? Also, could you suggest any forum/posts for getting started with DSDT patching? I never used DSDTs before. Anyway, thank you very much for your help. Especially for creating all those wonderful patches !
  7. Mavericks AppleHDA HDMI Audio

    toleda, thank you for your patience. I just tried it with logging, and it seems the SSDT is loaded. But its still not booting. Like before - In verbose mode, its stuck with the following message, ****[iOBluetoothHostControllerUSBTransport][suspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe400 **** config-debug-log.zip
  8. Mavericks AppleHDA HDMI Audio

    toleda, Tried this config file too. Didn't work. I am sorry for being too dumb here - but, I am not sure where to look for Clover logs? - Already looked in OS X Console. but there is nothing with "SSDT". I have enabled debug true in config.plist too. Also, do I need to generate DSDT.aml when I am using SSDT only ? At the moment the config.plist has that because, I was using Clover Configurator for generating the config.plist before. Anyway, I have already tried removing DSDT.aml line in the config.plist The only file in my CLOVER/ACPI/Patched folder is the SSDT.aml The CLOVER/ACPI/origin folder has DSDT-or.aml, DSDT-pa0.aml, DSDT-pa1.aml, DSDT-pa2.aml ( I believer they were generated by Clover when I removed the DSDT section from the config.plist ) :-( I am really not sure where to look or what do do !? config.zip config-2.zip
  9. Mavericks Realtek ALC AppleHDA Audio

    toleda, thanks for the reply. Sorry for mixing up the forum. I have tried it but no success yet. I have posted the IOReg & config.plist on the correct forum: http://www.insanelymac.com/forum/topic/292999-mavericks-applehda-hdmi-audio/?p=1974373 thank you !
  10. Mavericks AppleHDA HDMI Audio

    Hi toleda, Continuing from my previous post in wrong forum: http://www.insanelymac.com/forum/topic/293001-mavericks-realtek-alc-applehda-audio/?p=1974278 So, I tried as you suggested. But, I am not able to boot to OS X. So, I tried booted in the Safe Mode and exported the IOReg. Find the Clover config and IOReg in as-suggested.zip In case its useful, I have also attached the IOReg & config.plist for some partially working cases in other-cases.zip Some other Inputs: I am booting Clover from a USB, And I am using injecting kexts with IfNoFakeSMC. Without Injecting Intel Graphics, it do not see the HD4600 at all. In fact - it was not even detected by ##### Installer either ( I had to use IGPEnabler=yes, GraphicsEnabler=no) to try and install with that method. My motherboard is in Full UEFI mode. Have disabled Legacy boot and CSM! Hard disks are in GPT mode. What would you suggest? as-suggested.zip other-cases.zip
  11. Mavericks Realtek ALC AppleHDA Audio

    Hello toleda, I am having trouble to get HDMI Audio working. 10.9 Mavericks / Asus Sabertooth Z87 / 1603 / 4770K / Onboard HD4600 HDMI Installed and booting vanilla OS X 10.9 with Clover 2K-r2352 / AppleHDA 2.5.2 Patched with audio_ALC1150 None, tried installing SSDT as instructed, but then clover was not able to boot. I have attached my clover config.plist. sys-info screenshot. and IOReg export ( Sabertooth-z87.zip ) 1st when I tried to find the layout-id using IOJones & IORegistryExplorer_v2.1 it is showing up as 00 00 00 00 So, I am not sure which Audio ID, I am supposed to use. But, I tried 1 and 2 and both are working. I am getting Audio on different ports. I was using HDAEnabler1.kext earlier, but now I am injecting AudioID 1 with Clover and its working fine too. But I cannot get the HDMI Audio working on my SONY EX520. Motherboard has only an HDMI port. I tried patching AppleHDA.kext (already patched for ALC1150) and AppleIntelFramebufferAzul.kext using (audio_hdmi_8series-master). But I could not apply the SSDT. I do not have an Extra folder. So I created it and renamed SSDT-1.aml to SSDT.aml and set the Clover flag DropOem. But when I tried to boot, its stuck at the loading screen. Its probably not useful, but sleep is not working for me too - I thought I will try and fix it after Audio. Could you help, please ? Sabertooth-z87.zip config.plist.zip
  12. I later tried to install with clover. + And all I needed was a FakeSMC.kext and my Mac USB drive. + Graphics is working out out of the box with Clover. + Got WiFi with USB - RT5370 ( Injected kext with ProductID ) - App Store login is not working, So is iCloud and iMessages. I probably need to find SMBios for iMac 14, 2 for Clover and a valid Serial number and Ethernet Mac * Now I need to put the kexts for Audio, Ethernet, etc. will try that next weekend.
  13. Hello, I am trying to setup OSX Mavericks Hackintosh on my new build - Intel i7 4770K Asus Sabertooth Z87 Latest Bios Update 16xx was installed ! HDMI, 1080p, intel HD 4600 UEFI SecureBoot set to "Other OS" CSM boot settings is "Enabled" VT-x is "Disabled" Samsung 840 Pro SSD (x3 256GB) OS X has a dedicated SSD ESXi, Linux and Windows will use the remaining 2 SSDs Areca 1214-4i Raid ( Raid 5 of 4x WD Red 3TB ) Not plans to use it as a Boot disk and OS X already detects it without any issues. After the installation, I can boot to the system in "SafeMode" only. Could anyone help ? thanks Raj plist.txt
  14. I ended up ordering Asus Sabertooth z87 ! thanks for all your help.
  15. So, based on the availably here and the features, I am looking at these motherboards: ASRock Z87 OC Formula ASRock Z87 OC Formula/ac ASRock Z87 Extreme9 ASRock Z87 Extreme9/ac Gigabyte GA-Z87X-OC ( Obviously, will not need a patch, etc. ) I am really really interested in the AsRock boards(especially the formula). So I have two questions.. At least with a Patch, what is the probability of getting hackintosh set up on the OC Formula / Extreme9 ? Also, any idea about the Bluetooth and WiFi chipsets used in their AC versions? Are they supported in OS X ? If not, AC versions are off.
×