Jump to content

VaKo

Members
  • Content count

    18
  • Joined

  • Last visited

About VaKo

  • Rank
    InsanelyMac Protégé
  1. Can you clear. why should you change kernel?
  2. Sony Vaio VPCF115FM Discussion: DSDT Injection

    >Good news! AR9287(AR5B97)works fine in 10.6.7 finally!, We made it! here
  3. Sony Vaio VPCF115FM Discussion: DSDT Injection

    as I remember best way is not to install Lion from image, but you should open image before, so there, I think, you can find nessery files (can't remember exact sequence, so try to check, for example, netkas.org, or applelife.ru (it's on Russian, but Google translate should help ) try XPC bootloader instead [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] - it can pick up customized DSDT
  4. Sony Vaio VPCF115FM Discussion: DSDT Injection

    PS/2 As many have noted, passwd root does not work and, consequently, the first launch of the PS/2 pass fail cd / System / Library / CoreServices / Setup \ Assistant.app / Contents / sudo nano Info.plist At the end of the file comes with an array of key pages of the installer when you first start. Delete: <string> DeviceSection </ string> <string> KeyboardTypeSection </ string> Save the file (Ctrl + O), reboot and the installer will no longer look for USB / Bluetooth keyboard - you can safely pass the installation kernel output says: EHCI controller unable to take control from BIOS try to study this
  5. Sony Vaio VPCF115FM Discussion: DSDT Injection

    if we check DSDT, we will see a _DOD method (as I remember), that enumerated all devices connected to GFX port there you can find something like 0x800007332 - here is HDMI 0x0100 - so, here is CRT 0x0110 - thats our LCD (but it in Legacy format), that's give an information about analog screen.
  6. seems bolded quote is the reason on your problem. Cham don't like large partitions. it should be less 500Gb as I remember (but i'm not sure). So you should spilt your disk before trying to install Cham again
  7. Master Chief's P5K PRO ACPI Warfare

    with DSDT you just let your MacOS to "know" your hardware, as codec-id, pin-default, etc., but to let it sound you should feel up your AppleHDA.kext plug-ins with proper info. like this (see attach) (based on kext from 10.6.0 but work in 10.6.2 also) and in DSDT should be something like this: Device (HDEF) { Name (_ADR, 0x001B0000) Name (_PRW, Package (0x02) { 0x0D, 0x06 }) OperationRegion (HDCS, PCI_Config, 0x54, 0x04) Field (HDCS, DWordAcc, NoLock, Preserve) { , 15, PMES, 1 } [color="#ff0000"]Method (_DSM, 4, NotSerialized) { Store (Package (0x0C) { "codec-id", Buffer (0x04) { 0x83, 0x08, 0xEC, 0x10 }, "built-in", Buffer (One) { 0x00 }, "model", Buffer (0x0F) { "Realtek ALC883" }, "device_type", Buffer (0x07) { "alc883" }, "layout-id", Buffer (0x04) { 0x0C, 0x00, 0x00, 0x00 }, "PinConfigurations", Buffer (One) { 0x00 }[/color] }, Local0) MCDP (Arg2, RefOf (Local0)) Return (Local0) } } AppleHDA.kext.zip
  8. sony vaio VGN-FW 320J SNOW LEO

    You now, I really far from get enough experience to advice you something, 'cause install Mac on notebook is trilpe triky, than descktop PSs, but IMHO, your point at a moment is study 'til you will have clear answers to questions like: What exact hardware you have in your note Does your hardware support Mac Os install (as I heart ATI mobility chips is not completely supported) How to modify DSDT What model of Mac you should use to start and try to use InstallDVDs as more close to retail one, as possible. Good luck
  9. Master Chief's P5K PRO ACPI Warfare

    in addition to set correct P-states of your CPU you should properly set MAC-model, to start native speed step working. And I think your fans will always be on, cause at a moment there is no "published" way to deal with fan speed. BTW, on a previous page you can find my DSDT, I posted to Master (since that time i made some changes, but CPU section working, at least regarding P-states changing)
  10. Master Chief's P5K PRO ACPI Warfare

    Thnks, BTW, even without modifications, MCDP working fine for me in 10.5.8
  11. Master Chief's P5K PRO ACPI Warfare

    here my it is: dsdtMCh_Nvid_00.dsl.zip it's always quite hard to study you mean some sort of EFI string? No, I didn't, should I?
  12. Master Chief's P5K PRO ACPI Warfare

    So, according MCID, I just took you DSDT with follow lines regard USB Device (UHC1) // Renamed from: USB0 { Name (_ADR, 0x001D0000) Name (_PRW, Package (0x02)// Power Resources for Wake 0x03, 0x04 }) Name (_S3D, 0x02) // S3 Device State // Newly added: USB_RES�'USB Resume Enable Register. OperationRegion (BAR0, PCI_Config, 0xC4, One) Field (BAR0, ByteAcc, NoLock, Preserve) { USBW, 2, Offset (0x01) } Method (_PSW, 1, NotSerialized) // Power State Wake. { // Set bit 0-1 based on Arg0 (0 disable- or 1 enable wake capabilities). Multiply (0x03, Arg0, USBW) } Method (_DSM, 4, NotSerialized) // Device Specific Method. { [color="#ff0000"] Return (MCID (Arg2, 0x3A34))[/color] } } but, as you can see in attached pic, I stil have ICH9 dev-id in SystemProfile, with no correct errata field in IOReg (for UCHI it should be 0xe800 as I remember) but if I do it with DTGP method it inject ids properly. That where my question came from. As I saw in code MCID method is quite elegant and clear, thats why I surprised, it not working properly (at least for me) EDIT: Same story with dev-ids for EHCI, where you didn't add any ids and it's also show up as ICH9 device (also with no proper errata code), but Apple have no support for ICH9, as I think EDIT2: As I check again same story with SATA device. You try add ICH6 ids (i try with ICH8) but it still show up as ICH9 (2922:8086) regarding MCEH device I add siganture (sorry that didn't it before), so I talking about Hack#1 wth ASUS P5K Pro board with model MacPro 2.2 (filled with ACPI_SMC legacy kext and smbios.plist) As I understand AppleMCEDriver is related to AppleTyMCEDriver.kext (thats as I understand coming since 10.5.7 update regarding MacPro4.1 support), but even if I add this kext, it didn't load and give no changes to log. Hope I didn't annoy you so much.
  13. Master Chief's P5K PRO ACPI Warfare

    playing with last DSDT posted here, find out that MCID method id not working, ta least for USB devices (id-device in system remain ICH9 related, instead ICH10, we try to inject) is somebody have same issues, or I just so "lucky"? Also found in console log 11/28/09 10:38:37 PM kernel Assert failed: err == 0 exit file: /SourceCache/AppleMCEDriver/AppleMCEDriver-117.4.0/AppleMCEDriver.cpp line: 359 error: -536870212 ( 0xe00002bc ) as I understand it's regards to MCEH device, but have no idea how to deal with it.
  14. Master Chief's P5K PRO ACPI Warfare

    Master Chief thank for great job! just find this thread couple days ago, and some, may be lame question arrived. in SATA section you cut all info, that take care about drives timing (I saw about same situation in realMacs dsdt), could you explain why? Thanks again
  15. here it is codec_dump.txt cmi9880.txt.svg AppleHDA.kext sound.zip
×