Jump to content
InsanelyMac Forum

smalM

Members
  • Content count

    7
  • Joined

  • Last visited

About smalM

  • Rank
    InsanelyMac Protégé

Profile Information

  • Location
    Agres Decumates
  1. ATI 6850

    Barts is a Cypress design.
  2. Gigabyte GA-EP45-DQ6

    Did you install the driver for the JMicron JMB363? That is the secondary SATA controller on your board. The Silicon Image Sil5723 are port splitters hanging off the jmb363 ports. Maybe you are not able to use more than 1 port per Sil5723.
  3. 10.5.4 is released !

    Works on Core 2 Quad too Delta Update - Kalyway 5.3 - Vanilla Kernel - Asus P5K Dlx - Yorkfield
  4. 10.5.3 Update Guide

    "leopard 10.5.3 AMD only" - just apeared on the bay...
  5. You have a problem with your memory. Check the RAM settings in BIOS. 1.8GB/s transfer rate in stream is realy bad.
  6. Different drives - different results. MAXTOR 6Y250M0 = 250GB DiamondMax Plus 9 (8MB Cache) MAXTOR 6V320F0 = 320GB DiamondMax Plus 10 (16 MB Cache)
  7. AB9 Pro

    AB9 Pro - E6300 (2.8GHz on 400MHz bus) - 2 GB A-Data DDR2-800 (board didn't like my MDT DDR2-667). I installed Mac OS X 10.4.8 [JaS SSE3 with PPF1 & PPF2] with a TSCorp SH-S183A (S-ATA) onto an empty Samsung HD501LJ (even unpartitioned). All drives in AHCI mode connected to the ICH8R. Boot from DVD hang when in IDE mode. I used the loginwindow patch, ALC882 AppleHDA v0.4b for audio (not recogniced in profiler) and Natit_Uni_1.0 for video (eVGA GF7800GT Co - fan control is working). LAN, Sil3132, JMicron and firewire turned off in BIOS. I'm trying to get WLAN working first, will try the others later...
×