Jump to content


  • Content count

  • Joined

  • Last visited

About mr_kratz

  • Rank
    InsanelyMac Protégé
  1. mr_kratz

    G5 Front Panel to ATX I/O Cables

    Hi BlackCH, I'd like to order a cable please, I'll PM you with my details. Thanks!
  2. OK, I removed the EFI String and the GraphicsEnabler sections from the ocBp file and added the DSDT file. Still KP on boot, just booted with -v and the KEXTs being highlighted in the backtrace are AppleACPIPlatform IOAPCIFamily and AppleSMBIOS. Any idea why this may be happening? If not, I'll rebuild the machine from scratch using your step by step guide (I used rBoot and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] last time) and apply the DSDT before making any more changes. This way at least we have a 'clean slate' to start with, so diagnosing may be simpler Thanks again, Sam
  3. Thanks for looking, my system is as follows: P6T Deluxe V2 i7 920 6GB Ram Asus Geforce 560Ti Direct CU II TOP (1024mb) Without DSDT GFX is working fine after editing the NVDAGF100HAL kext. I'm more concerned about getting audio and network working correctly, but it would be nice to run the system as vanilla as possible of course Also, if the processor is set in DSDT, am I able to overclock still? I've attached a copy of my current chameleon boot.plist file with EFI string included for GFX card. Again, your help is much appreciated Sam org.chameleon.Boot.zip
  4. Hey Fabio, I've attached a copy of the IOREG dump as requested Let me know if you need any more info. Many thanks, Sam kratz___s_Mac_Pro.zip
  5. Hi ErmaC (nice name btw ) thanks for your hard work, I now have Lion installed on a P6T Deluxe V2, i7 920, 560Ti Only problem I'm having is if I use the DSDT on page 1, OS X crashes on Boot. Without it, I can boot and get correct res (by adding 0x1200 to NVDA100) but I dont have sound or Ethernet. Have you seen this before? How do I go about getting my DSDT edited? Thanks again, Sam (mr_kratz)
  6. i have the hard drives in my AR-11s configured as two seperate disks on disk 0 (100gb) i have 1 partition which has Windows XP Media Center Edition installed on disk 1 (100gb) i have 2 partitions : on partition 1 (50gb) i have Windows Vista Ultimate installed on partition 2 (50gb) i have OS X installed i installed via vmware, and have my boot loader working fine with the chain0 method my problem is that i cant get the OS X partition to boot, i get a "Still waiting for root device" error
  7. thanks for your help titan i've now got the laptop booting to my os x partition but i'm getting a "Waiting for root device" error it said that the secondatry IDE device is disabled on boot, i wonder if this is whats causing a problem as i have my two hard drives set up as non-raid and the osx drive is the second SATA drive?
  8. Hi Folks, Have been lurking here for a while and decided to setup my Sony Vaio AR-11S with a triple boot of MCE/Vista Ultimate/OS X I'm having real problems getting the OS X install to see the drives in the laptop, and i'm assuming its to do with the fact that the SATA Controller is reporting as a RAID Controller in Vista. The problem i have is that there are no option whatsoever to change the configuration of the SATA drives, and on the Intel website it states the following about the particular controller :- "Intel® 82801GHM I/O Controller Hub (ICH7MDH) - RAID only" I believe the chipset is 945GT Express If anyone can shed any light at all on this particular laptop i would be most grateful. I cannot find any updated BIOS which may have allowed me to modify the SATA config, also the Intel Matrix Manager (which is the RAID controller firmware) doesnt offer me any useful options other than creating/deleting RAID arrays. The laptop has 2x100gb SATA drives in it, but when i removed the initial RAID array it seems to just be using the individual drives on the RAID controller as two NON-RAID drives, rather than just disabling the RAID controller and using a standard SATA controller.... sorry for the essay but this has really been bugging me!! many thanks, Sam