Jump to content

OSX Sufferrer

Members
  • Content Count

    18
  • Joined

  • Last visited

About OSX Sufferrer

  • Rank
    InsanelyMac Protégé
  1. OSX Sufferrer

    Shaneee's AMD USB Fix

    I need a new help, I am trying to install the El Capitan on Vmware ESXi. I have modified the ESXi with the latest unlocker. Now I need a installer since USB pass-through is not working. Can you please tell me if I convert the InstallESD.dmg to iso and it will be sufficient? Can you point me to some link to create a a custom ISO with any required kext to put. I saw your video on youtube to create ISO where you used some extra kexts, how can I do that with ISO creation as well as patching with chameleon/chimera or any other bootloader?
  2. OSX Sufferrer

    Shaneee's AMD USB Fix

    are you sure it is installing? I have tried waiting for more than an hour but still remained on the 16 minutes remaining. I will do the setup again now and keep it like that for a longer time. Thanks for all the advice.
  3. OSX Sufferrer

    Shaneee's AMD USB Fix

    I was able to load the keyboard somehow, but now stuck at '16 minutes remaining' with the below error log on installation: https://www.dropbox.com/s/01vu5cxj1zac30i/osx.JPG?dl=0 this error is in a loop, only the value in NSCFCharacterSet: is changing, and no progress with the installer for a long time. And any update on how to fix this error https://www.dropbox.com/s/09fiz96iis8s5bo/IMG_20160629_034143.jpg?dl=0or I shall use the Spakks Fix to solve it?
  4. OSX Sufferrer

    Shaneee's AMD USB Fix

    okay tried plugging the keyboard on on another USB port but nothing worked, even tried on vmware workstation, the same situation, mouse working but keyboard not. Secondly, I have then tried on another AMD machine, got the following error https://www.dropbox.com/s/09fiz96iis8s5bo/IMG_20160629_034143.jpg?dl=0 it was just coming constantly like a loop, never ending message So I reboot the machine using the reset button, and found that the machine's BIOS setting is back to stock, whatever settings I had on the bios are gone and it is now in a stock state. I had to re-configure the bios again to boot the machine's Windows properly, set the time on bios and other required settings.
  5. OSX Sufferrer

    Shaneee's AMD USB Fix

    Okay I was able to solve the "Still waiting for root device" , but the old problem is still there, usb mouse working but usb keyboard not on install screen. I have both /Extra/Extensions and /S/L/E, however I installed the RehabMan Generic on /S/L/E and did the permission repair too. Also tried with the flag USBBusFix=Yes. Any other way around? It is kind of really strange that one USB device works and other does not.
  6. OSX Sufferrer

    Shaneee's AMD USB Fix

    where will apply this new kext - at /Extra or /System/Library/Extension?
  7. OSX Sufferrer

    Shaneee's AMD USB Fix

    Okay I tried using the bootflag and yeah used the SMBios overwriting the old one, but still stuck to still waiting for root device. One thing to point - when I use the vanilla IOUSBHostFamily.kext (that comes by default from the El Capitan InstallESD.dmg) I don't have any issue with mouse, only the keyboard does not work at all on the installer. So I need a fixes for the keyboard. I am on AMD machine (Phenom 2 x6 1090t, gigabyte ga-890fxa-ud5 v2.1 mobo)
  8. OSX Sufferrer

    Shaneee's AMD USB Fix

    I used this kext, the new v3, but I am getting 'still waiting for root device' - am I missing something? Used kext wizard to install kext and then fixed permission too. Also one point, when I checked the file IOUSBHostFamily.kext on the /System/Library/Extensions directory, there is a green dot before the file name. I am confused if fix permission worked or not. Any help?
  9. OSX Sufferrer

    AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

    @sirbow2 well i managed a osx install on my friend and streamed the dsdt on nawcom modcd. so far the USB problem is gone i think, because the error message did not appear using the modified bootcd. but a new problem appeared which was not seen earlier. the message is like below attachment when i had the usb problem, i did not have this atapi error, and i reached till the install screen of OSX Snow Leopard. Recently i did not make any bios update or any change in sata device or its port. can you please remodify the dsdt again or a guide to modify the dsdt on my own, what to change etc. another problem is no bootcd is able to solve the "nvenabler: probe fails" error, any best idea how to solve it?
  10. OSX Sufferrer

    AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

    please anyone help me... my DSDT is posted 5 posted above this reply, even if anyone want the nawcom modcd, i can share here, also please tell me how to edit the preboot.dmg and re-make the bootable iso, I can look for friend's mac os x to make my own bootdisc.
  11. OSX Sufferrer

    AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

    I tried nawcom bootcd latest one, I tried injecting the dsdt using magiciso, but it is giving error, I think windows can't read/write HFS+ file system. any other good way to inject the dsdt in windows?
  12. OSX Sufferrer

    AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

    Can you please tell me how to use this custom DSDT with my snow leopard retail/iatkos/hazard DVD during installation? and another thing, can I use this DSDT on any other system or just for my system?
  13. OSX Sufferrer

    AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

    I was not allowed to upload attachment, so uploaded at mediafire: here they are Gigabyte GA-890FXA-UD5 DSDT I ran the DSDTSE, clicked "Extract DSDT", new window compiled, got two files with extension dsl and aml. Please check them.
  14. OSX Sufferrer

    AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

    So how you are going to help me? And even if I get VoodooPs2 kext, how will i use it during installation? do i need to slipstream the kext to install DVD? if so then how to do that since Windows 7 does not show mac DVD contents and I have no other mac nearby. And how/where to get the DSDT for my motherboard?
  15. OSX Sufferrer

    AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

    Can anyone please help me: my system spec is below - amd phenom 2 x6 1090t gigabyte ga-890fxa-ud5 rev 2.1 BIOS F6 g. skill 2x2 gb ddr3 ram western digital caviar black 1tbx2 in raid0 gigabyte gtx460 1gb oc i am using a ps/2 keyboard and a generic usb mouse. i tried the following distros: iAtkos S3 v2 Leo Hazard 10.6.6i Retail Snow leopard 10.6.3 using the following bootcd: Nawcom's latest bootcd and EmpireEFI boot cd the problem is mouse is not working at the welcome install page and so i can't continue the installation. in verbose mode, the following error is coming multiple times USBF x.xx AppleUSBOHCI..... CheckSleepcapability : Device will be unloaded across sleep I don't know where the problem is, but nawcom bootcd is so amazing that it loaded ps/2 driver and i can use ps/2 mouse on my office's pc, the mouse works just from the installation phase but on my above home pc, the usb mouse is not detected. I then tried both USB keyboard and mouse, but same message is coming. Then tried disabling USB legacy and USB 3.0 from bios, but no solution. I tried installing osx in vmware and mouse is fine. the install is very smooth too. Please help me how make USB works, as if one is ps/2, then i need one usb either for keyboard or mouse to contimue installation. there is one guy here who is using similar setup like mine, just 890g mobo instead of 890fx, but same gigabyte brand. I don't know why it is not working for me.
×