Jump to content


  • Content Count

  • Joined

  • Last visited

About brerackl

  • Rank
    InsanelyMac Protégé
  1. Good evening, I used to mess around with iATKOS back in 2011, I since have been out of the loop and have gone through several different PC's. Now I have built a new PC and would like to install High Sierra to my external SSD. I have gotten as far as installing clover and the .raw image to my USB stick but I am getting stuck on the +++++++++++ then reboot problem. I realize a LOT has changed and I am having a bit of trouble figuring it out. My PC's specs are as follows: CPU: Intel Core i7 7820X RAM: 32GB Ballistix RGB Tactical Tracer (by Micron) Motherboard: EVGA X299 FTW K Graphics: NVIDIA RTX 2070 (EVGA) Storage: 4TB Western Digital HDD 1TB Samsung SSD 970 EVO 1TB 480GB Micron SSD If someone can help point me in the right direction that would be amazing, I have tried using some of the efi files for different x299 setups and such but no luck same results, played with different boot flags and options but everything is so much different I don't really know what does what. I would very greatly appreciate if anyone can point me to some reading or a specific set of files to get me past this error as I haven't the slightest why it is even doing this. Mind you the last time I played around with this was back in 2011 with iATKOS and CD's, I have no CD drive in this build and need to do this via USB and as I understand this is 100% possible I just need the right boot setup and settings. Thank you in advance, Brett
  2. brerackl

    iAtkos S3 v2 on Asus P7H55-M

    try using nawcom modcd v3.0 and type rd(0,0)/Extra/modbin_kernel at boot also check out my post im open to suggestions : http://www.insanelymac.com/forum/index.php...t=#entry1686260
  3. I have successfully installed iatkos s3 v2 on my HP p6733w-b i just need to tweek it to perfection it only boots if i use nawcom modcd v3.0 and type rd(0,0)/Extra/modbin_kernel idk what that means im good with computer stuff but this osx86 stuff is a new challenge and ive lost alot of sleep lol ill post full rig specs from speccy soon btw go to filehippo.org and get speccy its useful it will tell you all u need to know about your rig im reinstalling and changing some install selections to see if i can get it to work better will come back and post full rig specs *edit* HP p6733w-b Windows 7 Home Premium 64-bit on main partition CPU AMD Phenom II X2 511 Cores 2 Threads 2 Name AMD Phenom II X2 511 Code Name Callisto Package Socket AM3 (938) Technology 45nm Specification AMD Phenom II X2 511 Processor Family F Extended Family 10 Model 6 Extended Model 6 Stepping 3 Revision DA-C3 Instructions MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, AMD 64 Bus Speed 200.0 MHz Rated Bus Speed 2000.0 MHz Stock Core Speed 3400 MHz Stock Bus Speed 200 MHz Average Temperature 35 °C Caches L1 Data Cache Size 2 x 64 KBytes L1 Instructions Cache Size 2 x 64 KBytes L2 Unified Cache Size 2 x 1024 KBytes Core 0 Core Speed 3400.1 MHz Multiplier x 17.0 Bus Speed 200.0 MHz Rated Bus Speed 2000.0 MHz Temperature 35 °C Thread 1 APIC ID 0 Core 1 Core Speed 3400.1 MHz Multiplier x 17.0 Bus Speed 200.0 MHz Rated Bus Speed 2000.0 MHz Temperature 35 °C Thread 1 APIC ID 1 RAM Memory slots Total memory slots 4 Used memory slots 3 Free memory slots 1 Memory Type DDR3 Size 5120 MBytes Channels # Dual DRAM Frequency 666.7 MHz CAS# Latency (CL) 9 clocks RAS# to CAS# Delay (tRCD) 9 clocks RAS# Precharge (tRP) 9 clocks Cycle Time (tRAS) 24 clocks Bank Cycle Time (tRC) 33 clocks Command Rate (CR) 1T Physical Memory Memory Usage 26 % Total Physical 4.99 GB Available Physical 3.71 GB Total Virtual 7.99 TB Available Virtual 7.99 TB SPD Number Of SPD Modules 3 Motherboard Manufacturer FOXCONN Model 2AB1 Chipset Vendor AMD Chipset Model 785G Chipset Revision 00 Southbridge Vendor AMD Southbridge Model SB700 Southbridge Revision 00 BIOS Brand American Megatrends Inc. Version 6.04 Date 09/07/2010 Graphics Monitor Name HP 2311 on ATI Radeon HD 5500 Series Current Resolution 1920x1080 pixels Work Resolution 1920x1050 pixels State enabled, primary, output devices support Monitor Width 1920 Monitor Height 1080 Monitor BPP 32 bits per pixel Monitor Frequency 60 Hz Device \\.\DISPLAY1\Monitor0 ATI Radeon HD 5500 Series Memory 1024 MB Memory type 2 Driver version 8.821.0.0 LogMeIn Mirror Driver Memory type 2 Driver version 7.1.542.0 Audio Sound Cards AMD High Definition Audio Device Realtek High Definition Audio Playback Devices AMD HDMI Output (AMD High Definition Audio Device) Speakers (Realtek High Definition Audio) (default)