Jump to content
InsanelyMac Forum

Vienen

Members
  • Content count

    24
  • Joined

  • Last visited

About Vienen

  • Rank
    InsanelyMac Protégé
  1. Vienen

    ALC 888 for ML 10.8.3

    Hi, will it work with 10.8.2? I did not get the step 4. Can you post more detailed instruction?
  2. Hello all, I am new to Hackintosh. I have couple of basic questions. Do i need appleintelcpupowermanagement? I have ML installed. There is an error showing this kext-timed out during boot. How much does it affect if its not loaded? Thanks.
  3. Hello all, I recently installed iAtkos ML2 10.8.2. Everything works just fine except the ethernet. Everytime i boot or reboot, my ethernet shows 'cable unplugged' then i have to pull the plug and plug it again to work. I have installed appleRTL8169.kext. I am not sure if its a hardware or the kext issue. Thanks. My Specs: MSI 945GZM6-F Intel Dual Core 1.8GHz Geforce 9400GT 3GB RAM 10/100 Fast Ethernet by Realtek 8100C EDIT It was a hardware issue. Changed the motherboard and everything is working great. Thanks all.
  4. i have this same graphics and faced this problem before. Try another bootloader. Chameleon 2.1 will resolve this problem hopefully.
  5. Vienen

    Solution ALC888/ALC888S/ALC1200

    Thanx a lot. Perfectly working on iAtkos ML2.
  6. Didn't work for me. Still loads all the extensions. When i put the command it shows JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0 and then Created mkext archive /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.' Thanks
  7. Vienen

    [Solved]Lion Boot Issue

    Didn't work for me. Still loads all the extensions. When i put the command it shows JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0 . and then Created mkext archive /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.' . Thanks
  8. Vienen

    ALC889 No sound 10.7.2

    I had this same problem with ALC888. Nothing worked for me. Then i tried VoodooHDA kext and it worked but the sound is noisy. You can try VoodooHDA but remove AppleHDA and ALC889 kexts from S/L/E before installing or you will get Kernel Panic. Im still working on this to get AppleHDA working. I'll let you know.
  9. Worked for me. Just followed this guide and i went straight to the installation. But haven't tried installing it cause lion needs GUID partition and i cant erase my whole HDD partitioning it. i will try it on another HardDisk. but i past through this error. and thats what i needed.Thanks for this guide.
  10. i have added this above mentioned flag in the com.apple.boot.plist. but its not working. if i put this on chameleon bootloader it works just fine. I am on Snow Leopard 10.6.8. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Kernel</key> <string>legacy_kernel</string> <key>Kernel Flags</key> <string>arch=i386 npci=0x2000</string> <key>Timeout</key> <string>5</string> </dict> </plist> Where did i go wrong? Edit: I figured it out later that all this time i was booting from the bootable USB i created for LION not from the harddisk. I had to install chameleon in SL partiton and edit from there.
  11. ok problem solved. i booted into the xp partition. Scanned with Disk check utility and all my files are now showing. That interruption may had caused this problem.
  12. I was repairing one of my NTFS volumes with Disk Utility. The process interrupted by Power failure at that time. When i booted up again the drive shows the capacity and free space correctly as it was before but the disk is blank. Where are my files? Is it possible to recover those files?
  13. NVKush worked for me on Leopard. Didn't work on Snow Leopard. I'll try this method and let you know if it worked or not.
  14. Vienen

    MSI 945GZM6-F any chance?

    I'M running Kalyway 10.5.2 on this board without any problem except the processor using only one core. i tried different distros but only this one worked for me. Now i'm trying to get all cores work. Any help? I'M running Kalyway 10.5.2 on this board without any problem except the processor using only one core. i tried different distros but only this one worked for me. Now i'm trying to get all cores work. Any help?
  15. i've worked it out. This actually occures if there is some other usb device attached during booting. i could be wrong.
×