Jump to content


  • Content count

  • Joined

  • Last visited

1 Follower

About chriz74

  • Rank
    InsanelyMac Sage

Recent Profile Visitors

6,694 profile views
  1. chriz74

    computer resets at boot end

    Maybe this is caused by Lilu but I don't see a new release out there.
  2. Today I was trying to install the beta 4 but it won't let me with an error. So I reinstalled the get beta app and it downloaded the last (I think) build and reinstalled it over the beta 3. Installing went fine but now boot doesn't reach desktop and resets right at point where it should switch to second stage. Clues? I think it could be an igpu related (HD4000) problem but since it always worked fine I don't know what could be causing it.
  3. Hello yes it's the p253m, actually I downloaded the kext from some link in the forum. I didn't compile myself. I guess it's the same you have. There is nothing relevant in my plist as I disabled the AppleHDA patches I was using with Clover, however I am using a dsdt and injecting layout id 3 in HDEF with this DSM method: Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If (LEqual (Arg2, Zero)) { Return (Buffer (One) { 0x03 }) } Return (Package (0x06) { "layout-id", Buffer (0x04) { 0x03, 0x00, 0x00, 0x00 }, "hda-gfx", Buffer (0x0A) { "onboard-1" }, "PinConfigurations", Buffer (Zero){} }) }
  4. Solved putting atheros kext from high sierra (the one inside IO80211Family.kext) in L/E/
  5. solved with appleALC 1.2.8 and -lilubetaall
  6. chriz74

    AppleHDA Patcher

    ALC269 VB2 doesn't work under Mojave with this pathcer.
  7. I tried both applehda patcher and appleALC, no joy. Sound doesn't work. Clues?
  8. It was supported natively under High Sierra, now no hardware is found. Clues?
  9. Chameleon hangs at FakeSMCKeyStore: started
  10. I have this Acer t671 desktop pc, it uses ATI SR600-SB600 chipset. In the bios I disabled the IDE mode and enabled AHCI, I have two sata disks plugged to the MB, one has Windows, on the other one I installed Mavericks. I am using the latest clover but I also tried with an older one (33xx something version). The problem is the whole process of scanning entries, showing up and then start booting is EXTREMELY slow, I am talking about 5 / 10 minutes on USB and even slower on HDD. I am booting legacy as this pc doesn't have EFI, I set "boot block I/O" in clover setup or the disks won't show up, without this option clover shows up earlier but then it won't find any disk. Any clue? I don't have debug enabled.
  11. In this video I first show the boot time of my system running on an OCZ Vertex 3 SSD APFS formatted and with TRIM enabled. As you can see the boot has a long pause at these "FIPSPOST_USER" stuff. The solution that always worked for me is to create a time machine backup and restore to disk. As you can see after the restoring that long pause is drastically reduced. The initial boot time is 45 seconds circa, after restoring is down to 22 seconds. TRIM is still enabled and disk is APFS.
  12. Did you have sleep / wake problems with this MB ?
  13. I don't know if this ssdt stuff is needed at all. I am not using the port limit patch, I don't need more than 15 ports. My understanding is that if you apply the patch you could have problems re array bounds but if you don't you should get 15 ports and it seems all the ports are working without any modification of the kext or applying an ssdt.
  14. From what I can gather the system is using the XHC device. I plugged both usb 2 and usb 3 devices in all back ports, plus some case ports which are connected to internal headers. These were the ports used: the USB 2.0 device is always showing like 0 1 2 and the USB 3 like 0 1 on every port I tried. While connecting an usb 3 device and an usb 2 device to the usb 3.1 (blue port) on the back used this: Also these are the ports shown by usbview.exe under windows, I think we can create a custom injector for usbinjectall with this info.
  15. hmm as you can see I am using USBInjectAll.kext and XHCI-200-series-injector.kext and I think they are just working. I will check USB functionality of all ports later and report back.