Jump to content


  • Content count

  • Joined

  • Last visited

About GxGL

  • Rank
    InsanelyMac Protégé
  1. ACPI (DSDT) Patcher for BIOS and AML

    Hello, I still didn't get how this works! I have been into my mac os x (hackintosh), I have copied the hardware locations, got back into windows 7, started the ACPI Patcher, I have downloaded my bios, I have selected it into the app, then I have edited the patches and hardware locations, and nothing happens... It keeps staying on a CMD window for centuries... I have it try running it as an administrator too... I am missing something here? Thank you for any help or ideas!
  2. Leopard on HP nx7400?

    The bios is Phoenix I have installed Snow from Hazard, but after boot, after load everithing, i hear the sound but i have blank white screen. And on this machine it wants to load only with "cpus=1"
  3. Toshiba Built-in Bluetooth Working!

    Hello there! It doesn't work on leopard 10.5.8 & Toshiba A300-15J Thanks anyway!
  4. ATI Radeon HD pkg installers 10.5.x & 10.6

    Yeah! I have HD3470 and I have same probleme here It's something wrong somewhere, atix2000, natit, or whatever... After many reinstalations of the drivers, i think there is someting about resolution. Maybe is to big, or maybe is some conflict with x11 system. Never tested without x11 And also, after many analisys I think the natit is the problem, but I have try to edit and there is an EFI source... maybe something is wrong inthat code... too many hex codes in there ) ...for me! Netkas, some help please... aaaa... and I've installed efi emulation, but without succes for the drivers... I will post here, another list of data of HD3470... hopping to help those who write the drivers for us If you want to review my posts, please follow the link: http://forum.insanelymac.com/index.php?showuser=75278 @ Posts TAB
  5. ATI Radeon HD pkg installers 10.5.x & 10.6

    Back with new data for HD3470... Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility Radeon HD 3470 Device ID 95C4 Vendor 1002 Subsystem ID FF50 Subsystem Vendor ID 1179 Bus Type PCI Express 2.0 Current Bus Setting PCI Express 2.0 x16 BIOS Version BIOS Part Number BK-ATI VER010. BIOS Date 2008/01/31 Memory Size 256 MB Memory Type DDR2 Core Clock in MHz 680 MHz Memory Clock in MHz 500 MHz Primary Display Yes ============================= Name ATI Mobility Radeon HD 3470 PNP Device ID PCI\VEN_1002&DEV_95C4&SUBSYS_FF501179&REV_00\4&239D83FF&0&0008 Adapter Type ATI Radeon Graphics Processor (0x95C4), ATI Technologies Inc. compatible Adapter Description ATI Mobility Radeon HD 3470 Adapter RAM 256,00 MB (268.435.456 bytes) Installed Drivers ati2dvag.dll Driver Version INF File oem13.inf (ati2mtag_M72 section) Color Planes 1 Color Table Entries 4294967296 Resolution 1280 x 800 x 60 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xDFFFFFFF Memory Address 0xF0200000-0xF02FFFFF I/O Port 0x00002000-0x00002FFF IRQ Channel IRQ 16 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\ati2mtag.sys (, 2,71 MB (2.846.720 bytes), 07.09.2008 14:54) Hope this post will help! Thanks a lot, LastExile. MacOff, Netkas and everybody else :D
  6. ATI Radeon HD pkg installers 10.5.x & 10.6

    Here is some data for ATI Mobility Radeon HD 3470. Maybe this will help you.
  7. ATI Radeon HD pkg installers 10.5.x & 10.6

    Hey! There is something wrong with ATI34xx... after install all kexts from the archive and reboot, the screen is blank even in safemode. I've tried to change id's but no succes. I think there is much more to do and the work of drivers it is not resumed at changing id in plists. Thanks for drivers and good luck! >< aaa: natit is the problem, if I remove it, i have the screen back
  8. Hello Slice I've downloaded the source. Loaded the marvell kext and is work with a single problem: active link is missing and no ip detect from DHCP so there is no active link detected also a remark, there a two 8040 cards one is with 4354 and second with 4355. I've take a look to the sources and everithing looks OK. Maybe it is someting wrong with the bits... I have defined the 4355 adapter, but nothing more... it work just the same (no uplink).
  9. OK! First: You have to get the source code of the kest. Maybe you will find that on darwin site. Second: You must follow the steps in the source, maybe there is something that it is missing (surely). There you need to put the exact hard/vendor ids that os will reconize for your hardware device. Try to find that ids with windows os. Also, you can try to find the BSD or any Linux distro driver source code and then you will must update the source code for mac xCode, there is a little diference... Compile your updated source with xCode and test it. Success!