Jump to content

MMido

Members
  • Content count

    40
  • Joined

  • Last visited

About MMido

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
    Male
  • Location
    Norway

Recent Profile Visitors

2,079 profile views
  1. MMido

    Vega Frontier Edition on High Sierra

    Hi, I've been struggling with this particular issue since upgrading to Mojave on my Hackintosh build. It has VEGA FE 16 GB graphics. I have two 4K external display configuration. At home, with two 27 inch 4K UHD BL2711U Displays. the displays are connected directly to GPU Display ports. What happens is the GPU memory graph in iStat Menus shows a steady increase in utilization (right now sitting at 92%). When I open videos on Youtube or Vimeo or any streaming service in full screen mode at some point the system starts responding very slowly, and if not caught soon enough, it will become slowly unresponsive and it just can't free itself from it. If caught early enough, I'm able to do one of two things (aside from force power-down) to free up video memory and restore the system to normal. 1. Disconnect any one of the external displays in either of the two locations. 2. Change the screen resolution on any one of the external displays in either of the two locations. I have tried to erase my machine without being able to resolve the issue. I don't know enough about where preferences files are stored in the system relating to displays or GPU or whatever, so I don't know how to delete those. Pointers welcomed! Aside from testing further using a non-Safari browser to run videos, and deleting any preference files anyone here might recommend, I could try with only a single display connected. It's little intrusive to my workflow, but admittedly I haven't tried this yet and it seems appropriate to do so. Do these issues resonate with anyone? Any ideas? Thanks in advance!
  2. Which version of Mojave do use? try this if you use 10.14.1 EIST Performance fix by @PMheart for 10.14.1 by N.Mano Find:C1E30848 63D389D0 48C1EA20 B9990100 000F3048 FF05B38F 76004883 C4085B5D C30F1F40 00 Replace:BB00FF00 004863D3 89D048C1 EA20B999 0100000F 3048FF05 93AE7600 4883C408 5B5DC390 90
  3. MMido

    Vega Frontier Edition on High Sierra

    What about custom DSDT or SSDT patch, did you tried one of these methods to modify the AMD10000 kext?
  4. MMido

    Vega Frontier Edition on High Sierra

    No, I edit info. plist file directly in the AMD10000Controller. kext , but in general I use a patched DSDT file.
  5. MMido

    Vega Frontier Edition on High Sierra

    Used the combination below to test my system everything seems alright no crashing I am on air-cooling. Is there a way to monitor GPU temp in OSX? Core: 1642MHz/1150mV, Memory: 1045MHz/1075mV, SOC: 1199MHz, Temp target: 70, Idle fan: 700rpm 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 <key>PP_FuzzyFanControl</key> <integer>0</integer>
  6. MMido

    Vega Frontier Edition on High Sierra

    I am happy to report @okrasit that your setting with temperature target: 70C, Core: 1442MHz, Mem: 1045MHz, SOC: 1199MHz and the fan fix working great on my system. Is there any intent to make a clover patch with all prest you made. Sometimes LuxMark crashes is this just related to my system or it happing to you also?
  7. Hi nmano, in my case with the motherboard I have, it's a bit tricky to do the same thing. I can't figure out some stuff because my motherboard has two PCI bridges PCI0 and PCI1, so to rename devices I think it different. So what I want to know how exactly can I have the original SSDT that I can add my devices like the other original SSDT files you provided for the other motherboards? Is it the same method with clover bootloader and F4? because I did that and I had multiple SDDT files and I couldn't find which one of them I should edit. Can you please have look at the files I provided and guide me to what I can do? X10DAI dump files.zip
  8. MMido

    Vega Frontier Edition on High Sierra

    I tested them on 10.13.1 and they worked but without hardware acceleration.
  9. I check it out, and I noticed that you have a kext to make your AppleLPC.kext Load. So I thought this is maybe the reason for not making my power management working well, I add a patch to my DSDT file and its worked fine. I mean the AppleLPC.kext. Still with no different result in my cpus power management. I also checked several things but with no luck. by the way no one with Broadwell-EP cpus have proper power management performance under HS 10.13 I checked and I asked several people with the same cpus and I can say no result, its really frustrating. I attached also my EFI file can you check it out? maybe I missed something. EFI c612 10.13.zip
  10. Hi,@nmano ​I tried several solution to have a proper power management with my CPUs. Like Brumbaer's PMDrvr.kext but its not optimized to my motherboard and cpus config, I am always on the high range frequencies even on idle is there anything I can do to enhance the speed stepping of my cpus? ​I am at HS final release and I have a dual Broadwell-EP cpus. I wanna mention that when I change in the bios the CPU HWPM STATE CONTROL to HWPM OOB MODE I can have a really fantastic CPU power management performance, but I can never reach the max performance even if I used performance fix from oarksit in clover patch section. but when I disable this option in the bios I can reach the highest frequency but with poor power management.
  11. MMido

    [pre-release] macOS High Sierra

    apfs.efi from the GM incase someone need it. apfs.efi
  12. Hi Brumbaer, ​I tried every version of your kext but the moment I put it in /EFI/CLOVER/kexts/Other/ my system fail to boot. I am always on the high range frequencies even on idle is there anything I can do to enhance the speed stepping of my cpus? ​I am at HS DB9 and I have a dual Broadwell-EP cpus. I will appreciate any help.
  13. MMido

    Vega Frontier Edition on High Sierra

    Is it possible to share with me your latest working clover folder? I need to take a look Update: I did as you suggested I forced my card to 24 bit and I used the latest lilu and whatevergreen kext. Now I can finish Lexmark v3.1 but its finished with a very boor score I do not why and I still have my card recognised as eGPU?
  14. MMido

    Vega Frontier Edition on High Sierra

    I have a problem with completing Lexmark v3.1 benchmark and Metal geekbench, its crashing always I tried them on DP5-DP8. I also noticed that my card recognised as eGPU card I don't know why? is that a problem?
  15. I was working for 4 days trying to understand and fixing this but it's quite hard without some can guide you through your problem so I just decided to ask here maybe someone will help me. I have a C612 running High Sierra DP7. with dual engineering sample processors E5-2690v4 and VEGA FE I just wanna know is there any different xnu power management scheme in my case? I add FakeCPUID 0x040674 then run FreqEditVectors.sh to inject the missing data. I used one of the plists of the iMac17,1 and I knew it's not recommended to use max turbo patches from okrasit but I just test how the performance will be and it was quite higher on both my CPU and GPU. but the moment I disable the patch the performance drops again. I also spoke with pikeralpha and he pointed that its not normal to have iMac17,1 but IA32_ENERGY_PERF_BIAS is 5 and not 1 so that doesn’t appear to work, I tried several things to make this work but I couldn't change it to what he suggested. - So I wanna know a couple of things is it my power management looking good? - what can I actually do to get a better result? - How I can make IA32_ENERGY_PERF_BIAS be .(0x1B0) : 0x1 (highest performance) ? ​update: using latest clover r4200 seem to fix the problem now I have A32_ENERGY_PERF_BIAS be .(0x1B0) : 0x1 that mean highest performance. but I still struggling to reach my max turbo freq any help will be appreciate it. I add my latest working EFI folder. EFI.zip
×