Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.


  • Content count

  • Joined

  • Last visited

About mootrix

  • Rank
    InsanelyMac Protégé
  1. GMA3150 Bootloader by meklort

    Hello thank you for all your hard work. I have done what you said in the instructions and have tried GraphicsEnabler, AutoResolution and "Graphics Mode"="1366x768x32" and nothing seems to work for me. I have tried grabbing the EDID but it cannot be found in linux or OS X but it will boot up to the correct res in linux. I have also tried the latest NBI (0.8.5) but it hasnt worked either.)
  2. Incorrect resolution (GMA 3150)

    In my notebook I have a Desktop GMA 3150 ( 8086:a002 ) which no matter what will not boot into the correct resolution. I have tried 915resolution but it has not worked, I am pretty sure it is a version that supports the 3150. I have used "Graphics Mode"="1366x768x32" and have also tried putting it into the boot plist. I also tried GraphicsEnabler=Yes and AutoResolution=Yes. I also tried using the VBIOS injection. ALl of these methods failed. I tried SwitchResX which was no help at all, I then tried grabbing the EDID information from linux, but it could not get the information. It is just jumping to the highest resolution it can get from VESA 3.0 which is 1024x768. I can get full res in Linux and Windows. I can also get 800x600 if i specify it and any resolution from the VESA list, however the resolution I need is not there! Can anyone help? Thanks, Matt.
  3. I have myself an unbranded laptop. It is an atom D525 with Intel GMA 3150 graphics, I am running 10.6.7 with no kernel panics and everything except graphics working and the trackpad a bit odd. My trackpad works fine with 2-finger scrolling with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] but when I use Chameleon is is quite skippy and then when I try and turn 2-finger scrolling it completley stops working! It's using a Voodoo PS/2 Trackpad kext I'm pretty sure, any ideas on why it's working with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and not the latest Chameleon? Now with the 3150 graphics, it is stuck on 1024x768, I need it at 1366x768! So currently it is very squished up, the Graphics Enabler or Graphics Mode in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and Chameleon does not make a difference at all, I used NetbookInstaller 0.8.5 and also tried the seperate bootloader Meklort released for the 3150. Both of them only said something along the lines: 'Legacy915Enabler: No device vendor ID: 8026 device 2645 2642 2647 Disabled' I have written that from memory so it probably is not exact. Though I think it just doesn't recognise the 3150 is there, I have the Desktop 3150 but I checked in the source code on SVN and my ID is included in it (Display controller [0380]: Intel Corporation Unknown device [8086:a002] (rev 02)) It recognises it when it boots up though as it shows the make and model when [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/Chameleon starts to boot up OS X. I can change to any of the VESA supported resolutions but none of them are proper ones that don't squish up my whole screen, the highest i can go is 1024x768 and I need 1366x768 Also just as I tried to copy the ID I realised that without [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] my windows key does not work either! It just shows √ for paste and ç for copy! Thank you for your time, Matt.
  4. Youtube Crashes My System, HELP!

    A lot of people have had trouble with flash so try something else that uses flash such as megavideo or something and reply what happens or it could just be a graphics issue.
  5. Problem after Update to 10.6.5

    Try a using a legacy kernel as it looks like your CPU is unsupported by the vanilla kernel. You can find a legacy kernel or CPU specific kernel with search probably.
  6. Booting up from SnowLeo DVD Problem

    Try booting with a legacy kernel to fix your problem, or you could post the details of the panic. Also I have had a lot of trouble with that image but it worked with the retail version, I think that image must be very temperamental.
  7. Need help with drivers

    For graphics you could try the newest Chameleon with the ATI enabler and use GraphicsEnabler=Yes.
  8. 10.6.7 On 1201N And Other Questions

    Try and install the Synaptic trackpad kext and enable three-finger gestures through there and it may work.
  9. Install SL on HP Z400

    Try and install the USB Rollback through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], USBBusFix didn't work for me either but this did.
  10. nVidia 7300 GS 256mb

    Hello I am running Snow Leopard 10.6 retail on the latest [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. My motherboard is a Foxconn RC4107MA-RS2, graphics card is nVidia 7300 GS 256mb. I am wondering how I can get my resolution to 1440x900 and how I can get QE working? Also everytime i want to reinstall I have to put my windows disc into a different DVD drive (it gets errors on the one that works with OS X!) and delete the partition, otherwise i get a never ending dark grey screen. Whenever I restart I get this and have to reinstall, even after installing [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with Chameleon to the HDD it just puts me into a restart loop. I tried the HDD in a different computer and it does the exact same thing, it's formatted in GUID partition table with HFS Extended Journaled, I think it is the 160GB SATA hdd, I can only get it t boot to install with IDE mode, I don't have AHCI, just RAID and Mass Storage Device. It worked fine before on other computer and then it started doing this after I messed up my install trying to get my video card to work so I moved it into this new PC, it boots after the installation and I am able to setup my account and use ethernet fine!