Jump to content

rufinus

Members
  • Content count

    10
  • Joined

  • Last visited

About rufinus

  • Rank
    InsanelyMac Protégé
  1. Same problem with me!!! And if you take into account that i listen my music through custom DAC and headamp77
  2. rufinus

    Driver for nForce4 LAN

    OK, there clearly seems to be a large file transfer problem. I have ADSL. If i use all bandwidth, after some time it will hang. It seems like it has to do with multiple connections, because download managers will cause lockup very fast, and this managers are using multiple streams. After the lockup only reboot helps, kext unload-load does not help. Another problem is that after the manual disconnect, in order to connect to internet again, you have to do kext unload-load thing. In this case it will help. Mobo is MSI K8N Neo4-F
  3. rufinus

    Finally!

    StealthMode, do you also have SPDIF support? I have the same chip.
  4. I have 10.4.8 AMD test1 installed. There is audio out (stereo) and audio in (mic). But no audio is shown in system profiler. Is there any chance to get SPDIF? I have ALC850 chip.
  5. rufinus

    Driver for nForce4 LAN

    Thanx for the driver!! Here is my setup: OS X 10.4.8 AMD TEST1 Mobo: Msi K8n Neo4-F (nForce4 chipset) CPU: Athlon 64 Venice 3200+ Gainward 7300GS video Forcedeth worked basically out of the box. But with extended usage following things happened: when i disconnect from net (i have DSL with PPPoE) and try to connect again, it hangs. Only reboot helps. And sometimes it would disconnect by itself and then problem as described. And since i download a lot from rapidhsare and have a dynamic IP, it is really uncomfortable.
  6. rufinus

    JAS 10.4.8 - needs cd to boot (Dual Boot)

    OK, managed to fix it. Almost. Chain0 method worked, finally. Main problem: mind how do you write C:\chain0 in boot.ini !!!!!!!! Name of the file and the path to it in boot.ini must be the same!! I mean both in uppercase or both in lowercase. Now, there is still a problem. On startup i have 2 options: Win XP and MacOS. Choose XP -> no problem. Choose MacOS-> Darwin pops up and offers you to press any key for options. If you dont press any key -> back yo initial choice. Press a key -> 3 boot options, there you can choose WinXP or Mac. Choosing MAc works and loads OS X. So here how i boot: Start -> Win or Mac -> choose Mac -> press any key to choose in darwin Win or Mac (otherwise back to Win or Mac) How can i hace only one bootloader menu? With 2 choices: Win and Mac? And thats it?
  7. rufinus

    MacOSX_10.4.8DVD AMD SSE3 TEST 1 on piratebay!

    OK, managed to fix it. Almost. Chain0 method worked, finally. Main problem: mind how do you write C:\chain0 in boot.ini !!!!!!!! Name of the file and the path to it in boot.ini must be the same!! I mean both in uppercase or both in lowercase. Now, there is still a problem. On startup i have 2 options: Win XP and MacOS. Choose XP -> no problem. Choose MacOS-> Darwin pops up and offers you to press any key for options. If you dont press any key -> back yo initial choice. Press a key -> 3 boot options, there you can choose WinXP or Mac. Choosing MAc works and loads OS X. So here how i boot: Start -> Win or Mac -> choose Mac -> press any key to choose in darwin Win or Mac (otherwise back to Win or Mac) How can i hace only one bootloader menu? With 2 choices: Win and Mac? And thats it?
  8. rufinus

    MacOSX_10.4.8DVD AMD SSE3 TEST 1 on piratebay!

    Installed with DVD, actually, by now i reinstalled it probably 5 times. No problem excemt "Missing operating systen" {censored}. I get QE straight, sound straight, no network but easily fixed with forcedeth. Configuration: 10GB primary WinXP 10GB primary OS X 20GB primary FAT32 When i set first partition active - no problem XP boots, but when second partition active - "Miss...."
  9. rufinus

    MacOSX_10.4.8DVD AMD SSE3 TEST 1 on piratebay!

    Intsalled AMD SSE3 TEST 1. Install went good, no problem at all. OS functioning perfect, with all blows and whistles!! But one major problem: i can boot into OS X only with installer DVD in. Without it i get: "Missing operating system". Tried different boot managers, chain0 method - NOTHING HELPS Mobo: K8N Neo4-F (nForce 4 chipset) CPU: Atlon 64 Venice Video: 7300GS
  10. rufinus

    JAS 10.4.8 - needs cd to boot (Dual Boot)

    I have the same problem with AMD test DVD. Installs without problems, works like a charm, but would not boot without installer DVD. I have 3 partitions: 10 NTFS 20 FAT32 10 OSX OS X is Primary and active and still: "Missing operating system". And i tried Acronis bootloader and Bootmagic. Nothing.
×