Jump to content

wheels2040

Members
  • Content count

    17
  • Joined

  • Last visited

About wheels2040

  • Rank
    InsanelyMac Protégé
  1. ALC88x 10.4.8 Kext

    Six Ports - 4 Line Outs, 1 Line in, Mic In. Speakers and Mic work Three Ports w/digital - Line out, Digital Out, Line In, Digital In, Mic In. Speakers and Mic work. No way to test if digital actually works.
  2. ALC88x 10.4.8 Kext

    ALC888 Package on Gigabyte 965P-DQ6 w/ALC888DD. Six ports w/digital - no sound, no output or input devices Three ports - Line out, Line in, Mic In. Speakers and mic working Will continue testing with other options
  3. Read-Only Windows Partition

    He is running windows and osx on the same machine. That will only work if windows and osx is on two different machines, or he is running windows in a virtual machine like Parallels.
  4. Gigabyte GA-965P-DS3 Thread

    On the purple jmicron ports, they will only work in AHCI mode without the edits.
  5. Gigabyte GA-965P-DS3 Thread

    Which ports do you have your HDD plugged into, the orange or the purple? The method you followed is used to enable the purple JMicron ports and the regular IDE port for the DVD drive I believe.
  6. Cinebench Benchmark Results Thread

    CINEBENCH 9.5 **************************************************** Tester : Processor : MHz : Number of CPUs : 2 Operating System : Graphics Card : Resolution : <fill this out> Color Depth : <fill this out> **************************************************** Rendering (Single CPU): 558 CB-CPU Rendering (Multiple CPU): 975 CB-CPU Multiprocessor Speedup: 1.75 Shading (CINEMA 4D) : 674 CB-GFX Shading (OpenGL Software Lighting) : 2633 CB-GFX Shading (OpenGL Hardware Lighting) : 5943 CB-GFX OpenGL Speedup: 8.82 ****************************************************
  7. x86 Xbench Results Thread

    Results 167.15 System Info Xbench Version 1.3 System Version 10.4.8 (8L2127) Physical RAM 2048 MB Model ACPI Drive Type ST3320620AS CPU Test 178.09 GCD Loop 404.12 21.30 Mops/sec Floating Point Basic 194.83 4.63 Gflop/sec vecLib FFT 142.82 4.71 Gflop/sec Floating Point Library 127.36 22.18 Mops/sec Thread Test 330.79 Computation 308.25 6.24 Mops/sec, 4 threads Lock Contention 356.89 15.35 Mlocks/sec, 4 threads Memory Test 198.54 System 197.71 Allocate 164.76 605.05 Kalloc/sec Fill 251.84 12244.99 MB/sec Copy 194.80 4023.61 MB/sec Stream 199.38 Copy 186.03 3842.48 MB/sec Scale 182.69 3774.40 MB/sec Add 218.66 4657.86 MB/sec Triad 215.52 4610.50 MB/sec Quartz Graphics Test 247.77 Line 204.50 13.62 Klines/sec [50% alpha] Rectangle 267.48 79.86 Krects/sec [50% alpha] Circle 256.55 20.91 Kcircles/sec [50% alpha] Bezier 228.99 5.78 Kbeziers/sec [50% alpha] Text 304.28 19.03 Kchars/sec OpenGL Graphics Test 249.70 Spinning Squares 249.70 316.76 frames/sec User Interface Test 662.33 Elements 662.33 3.04 Krefresh/sec Disk Test 53.61 Sequential 112.84 Uncached Write 83.70 51.39 MB/sec [4K blocks] Uncached Write 123.11 69.65 MB/sec [256K blocks] Uncached Read 119.28 34.91 MB/sec [4K blocks] Uncached Read 143.00 71.87 MB/sec [256K blocks] Random 35.16 Uncached Write 12.29 1.30 MB/sec [4K blocks] Uncached Write 77.93 24.95 MB/sec [256K blocks] Uncached Read 83.24 0.59 MB/sec [4K blocks] Uncached Read 132.41 24.57 MB/sec [256K blocks]
  8. Gigabyte GA-965P-DS3 Thread

    With the reseed JAS DVD, I used an IDE to SATA adapter on my CD Rom, had Native set to disabled, set the IDE RAID AHCI selection to AHCI, had the purple ports set to AHCI, plugged both drives in to the orange ports and did not select any other options other than semthex. Its takes quite a while for the CD to boot, but it will boot and it will install. After I got a successful install, I then went back and installed the VIA drivers to get support for the purple ports, edited the kexts as outlined in the DS3 thread. Shutdown. Moved the HDD to the purple port and put the IDE cable back on the DVD drive, set the purple ports back to enabled in the BIOS and it booted like a charm.
  9. on my Gigabyte DQ6, the only way I could get it to boot the DVD is to get an SATA to IDE adapter for the DVD drive, plug the DVD drive into one of the ICH8 SATA ports, plug the SATA hard drive into one of the ICH8 SATA ports, and in the BIOS, set the ports to AHCI. It boots slower than molasses, but it does boot. Once it boots, the install seems to go at a fairly decent speed. Hope this helps somebody.
  10. I have followed the instructions to a T twice, and all I get is a blue screen followed by a black screen with a login prompt. Started with a 10.4.7 JaS DVD, did the Apple 10.4.8 update (not the combo), followed the rest of the instructions. Gave up. Waiting for JaS 10.4.8 DVD to finish downloading.
  11. 10.4.4 installer dvd trouble

    I believe there is an installer with the Maxxuss patches, but I havent seen anything on his website about an DVD he has done. Anyway, did you erase the drive and partition it with the 10.4.4 install DVD? As far as I know, you have to use a 10.4.3 DVD or an existing 10.4.3 install to erase and partition the drive and then you can install 10.4.4 on it.
  12. CD/DVD Labeling Software

    disclabel by smileonmymac. Its universal binary too
  13. my IP4000 works great with 10.4.3. Detected during install. No additional configuration needed to get it working.
  14. Native Install from DVD

    That board is LGA775, which I believe any supported CPU would be SSE3, so the SSE3>SSE2 patch would not be required.
  15. Toast 7

    Right now, you dont run it.
×