Jump to content
InsanelyMac Forum

visionary20

Members
  • Content count

    4
  • Joined

  • Last visited

About visionary20

  • Rank
    InsanelyMac Protégé
  1. visionary20

    Going to sleep then rebooting

    I have the same problem with my installation on a completely different board - I have searched around but I do not see any posts that reference this problem specifically. My box simply cannot sleep - and it always returns the apple error for recovering from an error for USB: Date/Time: 2014-01-18 08:18:31 -0600 OS Version: 10.9.1 (Build 13B42) Architecture: x86_64 Report Version: 18 Event: Sleep Wake Failure Steps: 0 Hardware model: Macmini5,1 Active cpus: 4 ================================================================ Code: 0x0
  2. I am running with DSDT on Chameleon boot from Uni/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Sleep and Wake actually works with Bluetooth (Magic Trackpad) but I get an error report when I reboot... I cannot find anything that does not work as I expect it to except that this thing reports unhappiness with Sleep/Wake. I am even seeing successful wake on LAN when the box is asleep. Gigabyte Z68MA2-D3H-B2 UEFI BIOS Date/Time: 2013-11-09 14:17:03 -0600 OS Version: 10.9 (Build 13A603) Architecture: x86_64 Report Version: 18 Event: Sleep Wake Failure Steps: 0 Hardware model: Macmini5,1 Active cpus: 4 ================================================================ Code: 0x0 Model: Macmini5,1, BootROM MM51.0077.B0F, 4 processors, Intel Core i5, 3.31 GHz, 16 GB, SMC 1.30f3 Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB Graphics: AMD Radeon HD 7870, AMD Radeon HD 7870, PCIe, 2048 MB Memory Module: BANK 3/ChannelB-DIMM1, 4 GB, DDR3, 1600 MHz, Corsair, CMZ8GX3M2A1600C9 Memory Module: BANK 1/ChannelA-DIMM1, 4 GB, DDR3, 1600 MHz, Corsair, CMZ8GX3M2A1600C9 Memory Module: BANK 2/ChannelB-DIMM0, 4 GB, DDR3, 1600 MHz, Corsair, CMZ8GX3M2A1600C9 Memory Module: BANK 0/ChannelA-DIMM0, 4 GB, DDR3, 1600 MHz, Corsair, CMZ8GX3M2A1600C9 Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports Network Service: Ethernet, Ethernet, en0 PCI Card: Intel HD Graphics 3000, Graphics Controller, Built In PCI Card: AMD Radeon HD 7870, Display Controller, J6B1 Serial ATA Device: TOSHIBA THNSNH128GBST, 128.04 GB Serial ATA Device: SanDisk SDSSDX120GG25, 120.03 GB USB Device: Hub USB Device: BCM20702A0 USB Device: Hub USB Device: Razer BlackWidow Ultimate 2013 Thunderbolt Bus:
  3. visionary20

    New Driver for Realtek RTL8111

    Hello - I experienced some trouble with the driver today in Mavericks 10.9. I am transferring a file to a Mackbook PRO from my Hackintosh using the RTL 8111 chipset on Gigabyte GA-Z68MA-D2H-B3 motherboard. I attempted to transfer a 15.6G file from the Hackintosh to the Macbook using the Finder on the Hackintosh. The transfer aborted itself after about 9MB transferred and I lost all network access even though the Ethernet device still showed active and ifconfig still showed configuration. I even attempted to ping another local node by IP and I was unable to do so. After a reboot I decided to grab the file using finder on the macbook and the transfer appears to be successful... Any ideas or information I can try to produce? I will attempt it again and see if I get the same failure. Thanks, ~Staypuft
  4. visionary20

    Problem with sleep

    I have the same situation with a different board. I never had problems with waking from sleep errors prior to the Mavericks install but since then when I return from sleep I get completely stuck USB (Unseating a USB device and re-seating it solves the problem) and when I shutdown completely I get a report of a Kernel Panic that says "Sleep Wake Failure" with the code: 0x0^@. Let me know if anyone comes up with anything to resolve this. My BT works, my USB works (Including 3.0 devices) just waking from sleep causes the odd behavior. ~Staypuft
×