Jump to content

ZikPhil

Members
  • Content Count

    42
  • Joined

  • Last visited

About ZikPhil

  • Rank
    InsanelyMac Protégé
  1. Ok so I had to take out the DSDT.aml that I had previous because it was causing boot errors very early on in the process. This is my current config including fresh DSDT drop. Both IGPU and my RX580 are recognized, 1 screen connected in each, both working. @MaLd0n If you could look at that and generate new DSDT it would be perfect. RunMe: https://www.dropbox.com/s/1jbi6a38egpjppx/Send me Prometheus2.zip?dl=0
  2. Hey @MaLd0n, I was finally able to boot using my IGPU + GPU by spoofing a kaby lake platform-id and disabling gfx firmware. Im sure it's not the right way but at least I got in to generate the RunMe. Here it is: https://www.dropbox.com/s/zmxk409nmezxut6/Send me Prometheus.zip?dl=0 Thank you <3
  3. I tried disabling and removing my TB3 card, that still didn't fix the Clover error when activating Internal Graphics.
  4. I will try, I hope you are wrong haha. Can I make this work without using IGFX?
  5. Both my monitors are hooked with DisplayPort at this moment, I had similiar problems in High Sierra.
  6. The moment I enable Internal Graphics I get a “could not allocate runtime area” in Clover. https://imgur.com/a/ktkbzIa
  7. Fun fact, "Internal Graphics" was Disabled in my BIOS. Not sure what happened. When I enable it + Your CLOVER: Clover is throwing a "unable to allocate runtime area" error When I enable it + my previous config.plist: Clover is throwing a "unable to allocate runtime area" error When I disable it + Your CLOVER: It boots but I get black screens after. I had to restore my previous clover folder for things to work. Also (random fact) on reboot sometimes I get this: https://imgur.com/a/X7vG5pt Here are my BIOS config while I have internal Graphics enabled: https://ibb.co/gkcmH8 https://ibb.co/jEZ0c8
  8. My specifications are as follows: iMac 18,1 (iMacPro goes black screen after boot) GIGABYTE Z370 AORUS Gaming 7 / Intel Core i5-8600K Coffee Lake 6-Core 3.6 GHz / 32GB Corsair Vengeance DDR3 @ 3000MHz Sapphire AMD Radeon RX 580 8GB (Collected from External Graphics Kit from Apple) 200GB NVME Drive (Samsung) + 500GB Samsung 2.5" SSD Big thanks to @MaLd0n to help me get as far as I did by providing me with DSDT and Clover config for High Sierra Installation Procedure: Upgrade from Mac App Store after installing the profile from the Apple developer site. Upgraded to Beta 2 the same way. What does work: Graphic Acceleration iMessage USB ports are all working Thunderbolt 3 (with TB-BRIDGE Add-on card, no hot-plug) Shutdown Restart Audio (through Thunderbolt 3 Dock, on-board audio is not working but I think it's just a matter of updating the kext) Ethernet What does NOT work: Sleep and Wake (more on that below) Sleep/Wake & General Graphic Issues I am having on and off issues with my graphic card. Sometimes it will just freeze, my mouse keeps moving, audio works but both screens are completely frozen. A hard reboot fixes that. And then just overall when I have to go through the login screen, whether it is on wake or on normal boot, both my screens just turn black. I get 1 screen that goes "no signal" for a few minutes and then comes back up black. If I wait 2 minutes while pressing "Enter" every once in a while, both screen flickers and eventually my login screen shows up. This is very weird. I have internal graphics enabled in my BIOS but I don't see it in System Information, I would be willing to do whatever it takes to fix it even if it means disabling internal graphics. Any help would be appreciated. Also worth noting I had issues with my GPU on High Sierra too. Thanks! Phil SendMe: https://www.dropbox.com/s/zmxk409nmezxut6/Send me Prometheus.zip?dl=0
  9. ZikPhil

    GA-Z77X-UD5H - iMessage Fix?

    Upgrading to Clover 2696 fixed this
  10. Hey guys, So i have been able to setup my system on Yosemite after following this guide for Mavericks: http://www.tonymacx86.com/mavericks-desktop-guides/128986-ultrazones-guide-z77x-ud5h-mavericks-clover-uefi-mode.html. I am now in a full EFI sequence. Everything is working for me except iMessage and FaceTime. I've ruled out the usual suspect SMBios and NVRAM but everything seems fine. Anybody with the same issue? Here is my config.plist : http://pastebin.com/JBe8jgDy EDIT: Also my EthernetBuiltIn is <true />
  11. ZikPhil

    Chameleon 2.4svn Official PKG Installer

    Any updates on how to install yosemite with Chameleon?
  12. I've added my SSDT plus more details about the tool i used, i hope this helps.
  13. Good Morning, I've tried to build a custom ssdt with ssdtPRGen for my CPU who can boost up to 3.8. I've made the edit, saved the SSDT.aml and put in the Extra folder. Added the DROPSSDT line in the boot.plist, changed my def to macmini 6,2 and somehow everytime i run MSRDumper.kext i only get: Jul 13 15:20:40 localhost kernel[0]: MSRDumper CoreMulti(34) Jul 13 15:20:40 localhost kernel[0]: MSRDumper PStatesReached: 16 34 using the following command in ssdtPRGen (tool by toleda) ssdtPRGen.command i5-3570K 3800 Any ideas? SSDT.aml.zip
  14. Solved by installing 3rd party sata kext.
×