Jump to content
InsanelyMac Forum

brad37

Just Joined
  • Content count

    4
  • Joined

  • Last visited

About brad37

  • Rank
    InsanelyMac Protégé
  1. Okay I have managed to get an error now, which is good thing. being that I could not get anything before. Now when I run dmeg I get IOPCCard notice: AdjustResourceInfo: Unknown error code 0xffffffff IOPCCardBridge::start failed Before I just got that invaild bus id 0x0 messege, and also after I changed out my pcifamily.kext, both the pcifamily.kext and the iopccardfamily.kext now show up and are satified in system profiler. I have also edited the plist file in pccardfamily.kext to match my info CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Toshiba America Info Systems Unknown device ff10 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at dc007000 (32-bit, non-prefetchable) Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 52000000-53fff000 I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff 16-bit legacy interface ports at 0001 I used plist edit pro, to edit the values in. By the way after I edit them they do not show as I typed them, is this normal? Anyway here is all my info, If anyone can help that would be great. Also thank you so much for getting me this far buggs, I will get it soon.
  2. Ohh ya when I did the install I used the customize option and put in the 10.4.6 combo update, sse2,sse3, and wireless networking. Not sure if thats usefull but you lost me on the whole dmesg thing not mounting, and that being a problem with my kernal framework. So I figured I would take a shot in the dark. Once again thank you for your help, and to this wonderfull site as well, without it my hacked mac would have no sound or ethernet.
  3. Hey buggs thanks for the quick reply I'm running jas 10.4.6, as far as the disk utility goes I have no idea. Whatever came with the install is what I have. I can tell you this I just reloaded and have not changed my kexts at all, and when I run the dmesg I get the same thing. Any suggestions you have would be great. Thanks again
  4. Alright, I have tried everything , and I'm sure I have done something wrong. I have a toshiba a105-s4034, with the pcixx12 controller. Here is my device read out from kanotix. 07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Toshiba America Info Systems Unknown device ff10 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at dc007000 (32-bit, non-prefetchable) Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 52000000-53fff000 I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff 16-bit legacy interface ports at 0001 I have edited these values in using plistedit pro. When I run dmesg | greppc, I just get IOPCCardBridge::checkBridgeBusIDs invalid sub/cardbus/pci settings of 0x0 I have seen some people have needed to replace there iopcifamily.kext as well but all the downloads I can find for it will not open. If anyone could please lend a hand it would be much appecitated. I have my alc861 sound and intel pro 100/ve network up and running, and with this i can get wireless. Thanks again
×