Jump to content
InsanelyMac Forum

Mackenstein

Members
  • Content count

    24
  • Joined

  • Last visited

About Mackenstein

  • Rank
    InsanelyMac Protégé
  1. Hi Zenith432 and thanks for the hard work. Hi all, I hope one of you could give me an help. I can't get above 12,5 MB/s writing speeds on my Time Machine Volume, and this is a RAID0 volume with 2x USB3.0 disks... :/ I must be doing something wrong. I have a GA-Z68XP-UD5 with 1 x Renesas D720200 chip and 2 x VLI VL810 hubs (latest VLI firmware installed). Any clues? 4-Port USB 3.0 Hub: Product ID: 0x0810 Vendor ID: 0x2109 (VIA Labs, Inc.) Version: 3.88 Speed: Up to 5 Gb/sec Manufacturer: VIA Labs, Inc. Location ID: 0x9d200000 / 2 Current Available (mA): 900 Current Required (mA): 2 d2 Quadra v3: Product ID: 0x104c Vendor ID: 0x059f (LaCie) Version: 56.00 Serial Number: 4D4E313232304633315058454B44 Speed: Up to 5 Gb/sec Manufacturer: LaCie Location ID: 0x9d210000 / 4 Current Available (mA): 900 Current Required (mA): 0 Capacity: 2 TB (2 000 396 746 752 bytes) Removable Media: Yes Detachable Drive: Yes BSD Name: disk7 Partition Map Type: GPT (GUID Partition Table) S.M.A.R.T. status: Not Supported Volumes: EFI: Capacity: 209,7 MB (209 715 200 bytes) BSD Name: disk7s1 Content: EFI disk7s2: Capacity: 2 TB (2 000 052 772 864 bytes) BSD Name: disk7s2 Content: Apple_RAID Boot OS X: Capacity: 134,2 MB (134 217 728 bytes) BSD Name: disk7s3 Content: Apple_Boot Volume UUID: E1494A08-1C52-35C6-87EE-66D4487EDE5A d2 Quadra v3: Product ID: 0x104c Vendor ID: 0x059f (LaCie) Version: 56.00 Serial Number: 4D4E313232304633315231555A44 Speed: Up to 5 Gb/sec Manufacturer: LaCie Location ID: 0x9d220000 / 3 Current Available (mA): 900 Current Required (mA): 0 Capacity: 2 TB (2 000 396 746 752 bytes) Removable Media: Yes Detachable Drive: Yes BSD Name: disk6 Partition Map Type: GPT (GUID Partition Table) S.M.A.R.T. status: Not Supported Volumes: EFI: Capacity: 209,7 MB (209 715 200 bytes) BSD Name: disk6s1 Content: EFI disk6s2: Capacity: 2 TB (2 000 054 960 128 bytes) BSD Name: disk6s2 Content: Apple_RAID $ xhcdump caps Found a device of class GenericUSBXHCI: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@1C,4/IOPCI2PCIBridge/PXSX@0/GenericUSBXHCI Darwin 13.0.0 Kext Version 1.2.7 Vendor 0x1033, Device 0x194, Revision 0x4 CapLength 32 HCIVersion 0x96 MaxSlots 32, MaxIntrs 8, Rsvd(1) 0, MaxPorts 4 IST 1 microframes, ERST Max 2, Rsvd(2) 0, SPR N, Max Scratchpad Bufs 0 U1 Device Exit Latency 0, Rsvd(3) 0, U2 Device Exit Latency 0 AC64 Y, BNC Y, CSZ N, PPC Y, PIND N, LHRC N, LTC Y, NSS Y, Rsvd(4) 0x2, MaxPSASize 32 xHC Extended Cap ID 1, Specific 0 Legacy CTLSTS 0x40010000 xHC Extended Cap ID 2, Specific 0x300 Supported Protocol Name 0x20425355 PortOffset 1 PortCount 2 ProtocolDefined 0 xHC Extended Cap ID 2, Specific 0x200 Supported Protocol Name 0x20425355 PortOffset 3 PortCount 2 ProtocolDefined 0 DBOff 0x800 RTSOff 0x600 PageSize 4096 $ kextstat | grep Gen 46 0 0xffffff7f815b8000 0x1b000 0x1b000 net.osx86.kexts.GenericUSBXHCI (1.2.7) <40 11 7 5 4 3>
  2. I don't know what else to do. I'm sure this error is related to my audio hardware, but I don't have a clue if I can fix it myself or... I'm getting my kernel.log spammed with the following message, and by spam I mean: "newsyslog[4088]: logfile turned over due to size>1000K" and this is the only message I can find on it: Jul 16 22:44:37 GA-Z68XP-UD5 kernel[0]: ReadCommand failed addr= ffc1 ffff f0080004 Jul 16 22:44:37 GA-Z68XP-UD5 kernel[0]: ReadCommand failed addr= ffc1 ffff f0080404 Jul 16 22:44:37 GA-Z68XP-UD5 kernel[0]: Write for 0xffffff8022b97900 done, status e00002d7 Jul 16 22:30:05: --- last message repeated 2 times --- I have a FireWire APOGEE DUET, and when that message starts popping up at my console, I loose audio, and I get kernel_task (root) busy on Activity Monitor. It grabs one of my i7 threads and hangs on to it like a pitbull, %cpu banging between 100% to 105%. At least it isn't a multicore loop, I manage myself quiet well if the program I'm working with doesn't need audio... But I like to do my music on this machine, so if some kind soul has any idea how to solve this, apart from uninstall duet driver and install back in, I would be very grateful and promise not to troll all the other forums seeking knowledge for this
  3. Hi, I've read lot of success stories with GIGABYTE Q67M-D2H-B3, so I was planning to go with this MB for my PT HD|2 (1x CORE + 1x ACCEL pci system), but I've noticed this similar ASUS MB, way cheaper. Question is, did any of you know about a success story with ASUS P8H67-V? main diferences: chipset: GIGABYTE Q67 / ASUS H67 Expansion slots: GIGABYTE 2 x PCI slots / ASUS 3 x PCI slots AUDIO: GIGABYTE ALC889 / ASUS ALC887 *but this isn't an issue! Audio will be disabled PRICE: GIGABYTE Q67M-D2H-B3 - 123.50€ / ASUS P8H67-V B3 - 92.90€ Thanks.
  4. Hi MaLd0n apart from Kernel[0]: IOSurface: buffer allocation size is zero I'm clueless why I'm getting this message so often: I believe the IOSurface error message it's related to Adobe Flash and I never read it to be KPing systems I've already exhaustively tested my RAM with MemTest86+ finishing with zero errors, so this time I'm sure it isn't RAM related. I've attached a send_me.zip hopping you could have a clue of what's going on send_me.zip launchctl_list.txt
  5. Hi magnifico10, Ffff Could you be more specific?
  6. To get proper help you need to make a proper question: your motherboard/hardware details and some status would help?!
  7. Hi, check file attached
  8. Store changed my ram! 1st 3 seconds of memtest reported 4k errors :/ I asked if they wanted to keep the test going on just to make sure Guys, my system looks rock solid now, I'm just short on sleep function. What it does is, it turns of my screens but computer keeps running... When pressing keyboard to kind of wake it up (it actually never sleeped) it takes ages to load screens and things fail, like keyboard, or to slow or what so haver. I also tried Meklort xnu-sleep-enabler with same results. Any ideas? send_me.zip
  9. this is RAM related! :/ memtest86+ is screaming red on my screen...
  10. humm... it looks like that the Kernel freezes are related to: kernel[0]: IOSurface: buffer allocation size is zero http://www.nanofunk.net/mac-osx-lion-10-7-...onsole-message/ I've download and installed http://labs.adobe.com/downloads/flashplayer11.html I still do have the spam 'kernel[0]: IOSurface: buffer allocation size is zero' console message but at least it doesn't KP. [KP alert]: here we go again... I'm getting very close to desperate. Any help here will make my day. last message before kernel panic on kernel.log was: Kernel[0]: 1 pagetable corruption incident(s) detected, timeout: 0 Kernel[0]: Incident 0x0, reason: 0x4, action: 0x0, time: 0x12830042fbc Kernel[0]: Write for 0xffffff804158c800 done, status e00002d6 is this a RAM related issue? thanks in advance!
  11. installed: /Extra/Extensions/NullCPUPowerManagement.kext and now it runs smoothly. Full /Extra/Extensions list: FakeSMC.kext --> Version 3.1.0 IOAHCIBlockStorageInjector.kext NullCPUPowerManagement.kext (for alc889) ALC8xxHDA.kext --> Version 1.0.1 Edited /System/Library/Extensions (For RADEON 6870) ATI6000Controller.kext --> Version 1.6.34.13 (9707) ATIFramebuffer.kext --> Version 1.6.34.13 (9707) ATISupport.kext --> Version 1.6.34.13 (9707) ATY_Init.kext --> http://netkas.org/?p=798 (for alc889) AppleHDA.kext --> Version 1.7.9a4 (for Realtek RTL8111E --> Official Realtek 2.0.6) /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleRTL8169Ethernet.kext org.chameleon.Boot.plist ... <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> ... smbios.plist ... <key>SMfamily</key> <string>iMac</string> ... <key>SMproductname</key> <string>iMac12,2</string> ... Hardware list: GA-Z68XP-UD5 + i7 2600K + GV-R687SO-1GD I'll fine tune and OC it now, but with stock 3.40GHz it just scored 12721
  12. fck! fresh install is my middle name! I'll let know what went on in the end. All my best.
  13. hi MaLd0n, thanks for showing me the way. but I'm still getting KP. After force shutdown my system disk dies. when I try to repair it, from Lion install pen, with Disk Util it stops with the following error: Error: Disk Utility can't repair this disk... disk, and restore your backed-up files. In other words... You're f#$%& Then I ave to both into backup system disk, repair it with Disk 'time consuming' Warrior. Re-install Chameleon (or it wont boot) any suggestions (maybe it's something to do with SATA controller...)?
  14. It's been a long time since I feel like a n00b It should be clear, but I don't get it! Should I go via (1) or (2) solution? Original device (HDEF) { Name (_ADR, 0x001B0000) Method (_PRW, 0, NotSerialized) { Return (Package (0x02) { 0x0D, 0x05 }) } Method (_DSM, 4, NotSerialized) { Store (Package (0x04) { "layout-id", Buffer (0x04) { 0x0C, 0x00, 0x00, 0x00 }, "PinConfigurations", Buffer (Zero) {} }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } solution (1) device (HDEF) { Name (_ADR, 0x001B0000) Method (_PRW, 0, NotSerialized) { Return (Package (0x02) { 0x0D, 0x05 }) } } solution (2) device (HDEF) { Name (_ADR, 0x001B0000) Method (_PRW, 0, NotSerialized) { Return (Package (0x02) { 0x0D, 0x05 }) } Method (_DSM, 4, NotSerialized) { Store (Package (0x04) { "layout-id", Buffer (0x04) { 0x79, 0x03, 0x00, 0x00 }, "PinConfigurations", Buffer (Zero) {} }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } }
  15. sorry m8, you're to fast for me remove method _DSM inside device _HDEF --> check! id 12 --> wft? I saw layoutid 0x04 inside method _DSM, but that was deleted?!?!? What do you mean by id 12? I'm also getting KP what of nowhere... Is there any log to check what was going on before KP? Again, I can't thank you enough with all the help!!
×