Jump to content
InsanelyMac Forum

jofox78

Members
  • Content count

    14
  • Joined

  • Last visited

About jofox78

  • Rank
    InsanelyMac Protégé
  1. Hi there, Snow leopard work good since the patched framebuffer, and it's very stable. Ive test spore, blu-ray (with makemkv and vlc); it's working fine. I've test the 10.6.8 update: it seem that apple move the framebuffer personalities in the Ati4600controller, like in the beta lion. I throw the code in the controller, not in the framebuffer. Ive patch Ati4600controller with the working patched connection table for 1920x1080 and add card identity in the same controller. Correctly "touch" extensions and repair permissions. After reboot, it hangs on : [PCI Configuration] , and nothing... So i ve reinstall to 10.6.7 who works fine. Don't know why its hang, i think that the 10.6.8 update is more close like lion than snow leopard, there are many changes in the structure. dsdt.aml08 work with A09 bios update? I dont have test for the moments, im always on bios a08. Can you edit a new dsdt.aml with A09 bios? I ve tried to make it myself, but it's not compilable, ive got many errors. Thanks in advance, and to still take time for that.
  2. Many Thanks for your help and bcc9, mucha, and other who have discovered the method Ive tested with fresh install many config, and the only working for me is the shrike first connection table : 02 00 00 00 40 00 00 00 09 01 00 00 12 00 00 01 (LVDS) 10 00 00 00 10 00 00 00 00 01 00 00 00 10 01 06 (VGA) 00 08 00 00 00 02 00 00 00 01 00 00 20 01 02 02 (HDMI) Ports are all working, qe/ci, full internal resolution 1920x1080, but no mirroring I have made the update to 10.6.7, and test your atiframebuffer 10.6.7 patched, it dont work for me, so i ve patch the 10.6.7 kext from fresh update myself with the old connection table and its work for me. Effectively, the fan's running lower than before, but a little bit high. I have posted my configuration in your collection's thread post : http://www.insanelymac.com/forum/index.php...p;#entry1660086 Yes, it work for 1920x1080, but only the "old framebuffer" and your are right, ... ... i dont have repair permissions on the first time... The audio card's working now with your patched id applehda.kext Many Thanks you're a genius
  3. Dell Studio 1557 - ATI Mobility Radeon HD4570 (Device ID: 0x9553) - Max internal screen resolution: 1920x1080 bcc9's RadeonDump's log:- ATOM BIOS Rom: SubsystemVendorID: 0x1028 SubsystemID: 0x02bd IOBaseAddress: 0x0000 Filename: BR034783.006 BIOS Bootup Message: BR034783-006 M92 DDR3 64bit 500e/800m Connector at index 0 type: VGA (1) Connector's i2cid: 95 Connector at index 1 type: HDMI-A (11) Connector's i2cid: 91 Connector at index 2 type: LVDS (7) Connector's i2cid: 90 senseid = (i2cid And 0xf) + 1 VGA: (95 And 0xf) + 1 = 6 HDMI: (91 And 0xf) + 1 = 2 LVDS: (90 And 0xf) + 1 = 1 Dong's RadeonHD's verbose log:- Mapping DIG1 encoder to KLDSKP_UNIPHYB Connector "DVI-D 1" uses Monitor "SONY TV": I2C device "RHD I2C line 0:ddc2" registered at address 0xA0. rhdAtomLvdsTimings: LVDS Modeline: 1920x1080 138500 1920 (1920) 1968 2000 (2080) 2080 1080 (1080) 1083 1088 (1111) 1111 Call to AtomBIOS Get Panel Mode succeeded Mapping DIG2 encoder to KLDSKP_UNIPHYE Crtc[1]: found native mode from Monitor[LVDS Panel]: Modeline "1920x1080" 138 1920 1968 2000 2080 1080 1083 1088 1111 Connector "PANEL" uses Monitor "LVDS Panel": DxModeValid: ATOM CRTC 2 Listing modesetting layout: ATOM CRTC 1: tied to Atom PLL 1 and LUT A: Outputs: AtomOutputUniphyB (DVI-D 1) ATOM CRTC 2: tied to Atom PLL 2 and LUT B: Outputs: AtomOutput?@??UniphyE (PANEL) Unused Outputs: AtomOutputDACB Tested Framebuffer (Tested with 10.6.6 ATIFramebuffer.kext & ATI4600Controller.kext with graphic card ID) Shrike:- Patched connection table (32bit):- --> 00037298 02 00 00 00 40 00 00 00 09 01 00 00 12 00 00 01 (LVDS) --> 000372A8 10 00 00 00 10 00 00 00 00 01 00 00 00 10 01 06 (VGA) --> 000372B8 00 08 00 00 00 02 00 00 00 01 00 00 20 01 02 02 (HDMI) Patched connection table (64bit):- --> 00010F80 02 00 00 00 40 00 00 00 09 01 00 00 12 00 00 01 (LVDS) --> 00010F90 10 00 00 00 10 00 00 00 00 01 00 00 00 10 01 06 (VGA) --> 00010FA0 00 08 00 00 00 02 00 00 00 01 00 00 20 01 02 02 (HDMI) Result: All ports are working. Full resolution supported. QE/CI are supported. Supported configurations are LVDS + VGA & LVDS + HDMI. Mirorring not supported ioreg.1557.1920x1080qeci.zip
  4. Yes, this is what i mean , all is working good, the water effect when i add a widget in dashboard, the dvd player work. and rectification, the fan is not running at the maximum, but higher than in linux or windows. I ve got problem with sound, do you have applehda modified, or not, installed on your 1557?
  5. Ok, before reinstalling, i have retest your ATIFramebuffer.kext, with vga and hdmi. I have put the graphic card id in ATI4600controller.kext use touch /System/Library/Extension and run kextutility to repair permissions. I used the previous bootloader, (chameleon with trunk, build 16.03.2011) Ive got external screen worked properly with qe/ci And Surprising to me, the internal screen work in 1920x1080 with qe/ci Just a little problem with the fan who work as maximum and dont slow. Here are the screens, and ioreg output : ioreg.1557.1920x1080qeci.zip I will still retry with a fresh install, i dont how why it has been work Thanks for your help
  6. Hi, Very useful thing the remote connection ive got the output with dong radeonhd from 10.20.2009. I dont know if this informations are utils, i ve made 3 output 1. with a vga monitor : internal lcd black after boot, with backlight, and external monitor working in all res that he can support. When i change resolution from 1024x768 to 1280x1024 with system preference, the internal monitor got an output, but absolutely wrong colors and resolution 2. with a hdmi monitor : internal lcd black after boot, with backlight, external monitor working, when i change the resolution nothing append to internal monitor. 3. just the internal monitor, no external : surprising, after boot ive got the native resolution This is the folder, inside there are the 3 files : radeondump_1557.zip For the moment, i cant post you ioreg with the atiframebuffer patched and your modified bootloader : ive got black screen with backlight, fan running slower, the external monitor, if connected dont work (like if they are disconnected), and i cannot have vnc connections (wich is running fine in other configuration, or with radeon kext, and ive made it to start automatically) Suppositions :I think that the boot sequence isnt finish, and it block just when the graphic would come. I will make a fresh installation, and retest
  7. Ok, thanks to have verified my patched files I have been able to enable 4600controller, and after boot , with the two patched conections, ive got a blank screen for 0,5 sec. and then black screen, the fan run much lower, and the boot sequence seems to be finish. I have retest with a vga monitor, and after with hdmi, the same thing's going, and ive got no output on the external screen. for the moment i can't have a ioreg output
  8. This is the garbage screen:
  9. Thanks for the update Ive retried with refreshing kext cache, and ive got this time for the two patched connection with your updated bootloader, a garbage screen in the two cases. Test only with 32 bit. I will tried to connect a monitor to vga and hdmi, and se what append, and tried to send you ioreg. There are the ATIFramebuffer that ive patched, let me know if they are rightly patched: Framebuffer_1.zip Framebuffer_2.zip Where is the log output, when verbose booting? Thanks in advance ***Edit*** the Framebuffer 2 is'not good, there is a repatched version that i think is good: Framebuffer_repatched_2.zip And ive got a garbage screen too
  10. All right, there are the files ioreg1557shriketest1.ioreg.zip ioreg1557shriketest2.ioreg.zip
  11. Hi, Thanks to take time for that Ive tried the two patched connection with your boot file, in 32 and 64 bit , and unfortunately it was not working. But in the two cases, i am able to boot normaly with "graphic enabler=yes", and the screen appear in 1024x768, my graphic card is also detected, and apparently the monitor isnt detected ATI Radeon 4500 Mobility Series : Jeu de composants : ATI Radeon 4500 Mobility Series Type : Processeur graphique (GPU) Bus : PCIe Logement : Slot-1 Longueur de la voie PCIe : x16 VRAM (totale) : 1024 Mo Fournisseur : ATI (0x1002) Identifiant du périphérique : 0x9553 Identifiant de révision : 0x0000 Révision de la ROM : 113-B7710C-176 Version du gestionnaire EFI : 01.00.318 Moniteurs : Moniteur de type inconnu : Résolution : 1024 x 768 Profondeur de pixels : Couleurs 32 bits (ARGB8888) Moniteur principal : Oui Miroir : Désactivé Connecté : Oui Connecteur pour le moniteur : The strange thing is that it recognize 1024vram, and ive got 512... I used your dsdt is it a good thing? Ive got ioreg output, but i cannot upload them, i will retry later
  12. Hi, i ve got also a dell 1557 i7 720qm, mobility radeon 4570 512mb, but wled 1920x1080. Thanks for your topics about this notebook, i m able to run osx 10.6.6, but no qe/ci yet. I used your kexts and patched files. After hours of reading, it seems to be a problem with the dual link dvi support. The injector dont recognize it properly , (if i m right). But i m noob with hexadecimal and compilation, can you help me to resolve this, i m ready to make test Here is the output of radeon_bios_decode (i think it will be the same as you, but i would verified), and the dmesg in linux : Mac-Pro-de-MysticJo:test mysticjo$ ./radeon_bios_decode < 1002_9553.rom ATOM BIOS Rom: SubsystemVendorID: 0x1028 SubsystemID: 0x02bd IOBaseAddress: 0x2000 Filename: BR034783.006 BIOS Bootup Message: BR034783-006 M92 DDR3 64bit 500e/800m Connector at index 0 Type: VGA (1) Encoder: id: 16 name: INTERNAL_KLDSCP_DAC2 i2cid: 0x95, OSX senseid: 0x6 Connector at index 1 Type: HDMI-A (11) Encoder: id: 1e name: INTERNAL_UNIPHY i2cid: 0x91, OSX senseid: 0x2 Connector at index 2 Type: LVDS (7) Encoder: id: 21 name: INTERNAL_UNIPHY2 i2cid: 0x90, OSX senseid: 0x1 [ 4.648762] [drm] ring test succeeded in 1 usecs [ 4.648901] [drm] radeon: ib pool ready. [ 4.649118] [drm] ib test succeeded in 0 usecs [ 4.649291] [drm] Radeon Display Connectors [ 4.649348] [drm] Connector 0: [ 4.649400] [drm] VGA [ 4.649452] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac [ 4.649527] [drm] Encoders: [ 4.649579] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 4.649635] [drm] Connector 1: [ 4.649684] [drm] HDMI-A [ 4.649733] [drm] HPD1 [ 4.649781] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 4.649850] [drm] Encoders: [ 4.649898] [drm] DFP1: INTERNAL_UNIPHY [ 4.649949] [drm] Connector 2: [ 4.649998] [drm] LVDS [ 4.650046] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 4.650115] [drm] Encoders: [ 4.650164] [drm] LCD1: INTERNAL_UNIPHY2 [ 4.768166] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 4.785879] [drm] fb mappable at 0xD0141000 [ 4.785931] [drm] vram apper at 0xD0000000 [ 4.785981] [drm] size 8294400 [ 4.786029] [drm] fb depth is 24 [ 4.786078] [drm] pitch is 7680 [ 4.786173] fb0: radeondrmfb frame buffer device [ 4.786227] registered panic notifier [ 4.786280] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0 and the /var/log/Xorg.0.log with radeon.modeset=0 Xorglogmodeset0.txt I use bios AO8 Thanks
  13. All right , i use everest to extract the vbios, and rename it xxxxx.rom. Back to osx, radeon_bios_decode, and i have what i was searching for. Right, at this time, i have to make my internal lvds (1920x1080) working. in this post, http://www.insanelymac.com/forum/index.php...5308&st=340 , apparently for higher resolution than 1366x768, we need dual link dvi, for that we have to modified bootloader. See the evolution on the post linked.
  14. Hi , i post here because i cant (for the moment) post in the entire forum. 1. Great Thanks for bcc9 mucha ,kizwan and the others who have discover the method for qe/ci enabled on mobility 4xxx ati cards, great job 2. I have a dell studio 1557, core i7 720qm, mobility radeon hd4570 512 mb, WLED 1920x1080, 4gb ddr3 1333mhz, intel wifi 5300 I tried the method of kizwan in : http://www.insanelymac.com/forum/index.php...p;#entry1650842 but im not able to get a working graphic, only garbage screen. Ihave a working vanilla osx 10.6.6 installation and have used the kext that kizwan have post (thanks for that, the system's running fine). Modified ATIFramebuffer and the modified bootloader are used Is it possible that my senseid is not the same , because of my internal screen is 1920x1080 But i 'm not able to extract myself the VBIOS of my 4570m 512. Gpu-z refuse to extract the bios and i dont know how to extract the vbios from the motherboard bios (dell 1557 A08). the gpu-z output is : http://gpuz.techpowerup.com/11/03/27/8g0.png Anyone can help me ? Especially kizwan , to got my 4570m vbios? Thanks in advance ps excuse me for my very bad english
×