Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Jaamae posted a topic in nVidiaHey guys, Firstly, this is about an old nvidia graphics card (7600gs) and Snow Leopard, so if I am posting this in the wrong section my apologies. So I have a desktop system with this AGP card installed, and have installed Snow Leopard 10.6.2 for now. I have added the device ID/vendor ID to NVDAResman.kext and NVDANV40Hal.kext, and have tried with just that, as well as NVEnabler and NVInject, and all give the same result: after the apple logo with the spinner/end of verbose booting, the monitor loses signal. Same in safe mode. One of the final lines in verbose mode is "NVDANV40Hal.kext loaded and registered". The card has a VGA, DVI and TV out. I am testing it on VGA. I have tried VGA and DVI, but it made no difference. I find that if I delete NVDAResman.kext, display is restored (albeit without driver support so at a dodgy resolution etc). I have scoured these and other forums for a solution and have been unsuccessful. Any help would be greatly appreciated. Thanks in advance, Jaamae. ----------------------------------------- Intel Celeron (Prescott) 2.8Ghz Motherboard: MS-6787 Ver 2 Install method: Snow Leopard for Intel/AMD SSE2/SSE3 by Hazard Kernel: 10.2.0 Legacy Kernel