Jump to content


  • Content count

  • Joined

  • Last visited

About Yragael

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
  • Location
    Gironde, France
  1. Hi. Just tried to boot with "cpus=1" parameter, sleeps and wake, no freeze... I'm gonna check for TSC sync problems, seems to be usual on MSI boards.
  2. I modded my bios to add NVMe and PM support (MSR 0xE2 unlock), and a few upgrades. Even with PCIe 2.0 x4 bus it is three times faster than SATA SSD. I continue my investigations’ but maybe it is also TSC problem. Thanks.
  3. Hi. Have played too much with my bios so got it corrupted... I had to unsolder the 25Q64, flash it and solder it back. My mobo is saved, and now I know how to add a backup bios for MSI boards, will test as soon as I get spare flash chips. I have noticed that in PM logs I get messages about slow drivers: Sleep Entering Sleep state due to 'Software Sleep pid=87': Using AC (Charge:0%) 21 secs PM Client Acks Delays to Sleep notifications: [mDNSResponder is slow(1339 ms)] [com.apple.apsd is slow(1807 ms)] Kernel Client Acks Delays to Sleep notifications: [touristd timed out(30000 ms)] [AppleHDADriver driver is slow(msg: SetState to 0)(1313 ms)] [iONVMeController driver is slow(msg: SetState to 0)(585 ms)] [AppleSMC driver is slow(msg: SetState to 1)(-14046432 ms)] [AppleLMUController driver is slow(msg: WillChangeState to 1)(1716 ms)] [AppleIntelPchSeriesAHCI driver is slow(msg: SetState to 2)(-14046432 ms)] Delays to Wake notifications: [PR21 driver is slow(msg: SetState to 3)(1749 ms)] [en0 driver is slow(msg: DidChangeState to 1)(-14046423 ms)] [AppleHDAController driver is slow(msg: SetState to 2)(-14046422 ms)] [iOUSBHostDevice driver is slow(msg: SetState to 1)(1717 ms)] [iOUSBHostDevice driver is slow(msg: SetState to 1)(1717 ms)] [AppleHDAHDMI_DPDriver driver is slow(msg: SetState to 1)(403 ms)] [ATY_Vervet driver is slow(msg: SetState to 2)(2258 ms)] [sPT0 driver is slow(msg: SetState to 2)(1874 ms)] [AppleHDADriver driver is slow(msg: SetState to 1)(5211 ms) Any idea ?
  4. Still freezing. I’ll try tomorrow with another graphic card. As i have a 2300 i5 i canot use IGD. Thanks anyway.
  5. Unfortunately my "hackenstein" has still same behavior. Still slow at sleep and wake up, then it is unusable. Wifi cannot reconnect. Logs are unusable (at least for me, was used to syslog). Any idea ?
  6. Hi MaLd0n. I'm trying to get sleep working on my MSI ZH77A-G43, without success. It sleeps but at wake up I lose WiFi and it is very slow then freezes. Would you be kind to give it a look and give me some advice ? Send me iMac-de-Jean.zip
  7. Yragael

    Samsung np300e5c-a0aus

    To use PS2 keyboard you need ApplePS2Controller or VoodooPS2Controller kext. Apple uses USB or bluetooth keyboards, so yours needs a driver. About WiFi, it appears that AR5B225 is not supported (didn't try). You may try DSDT fix. Otherwise here is a list of supported cards: http://forum.osxlatitude.com/index.php?/topic/2120-supportedunsupported-wireless-cards-inventory or here https://spreadsheets.google.com/pub?key=0Arr23WYNror4dEc2T045WkFrbm56N0JfQVdiSU5jdHc&hl=ru&output=html Let me know which extensions are installed on your system. It is always better to install vanilla OSX, do not use any installer. To start you just need FakeSMC and keyboard extensions.
  8. Yragael

    Samsung np300e5c-a0aus

    What happens when you boot with verbose flag only ? Please post original DSDT and IORegistryExplorer report. For Wifi, HD4000, Battery.. DSDT edits. Wifi, under Device (RP01) Device (ARPT) { Name (_ADR, Zero) Method (_DSM, 4, NotSerialized) { Store (Package (0x10) { "built-in", Buffer (One) { 0x00 }, "model", Buffer (0x19) { "Atheros AR9285 WiFi card" }, "name", Buffer (0x0B) { "pci168c,2a" }, "device-id", Unicode ("*"), "subsystem-id", Buffer (0x04) { 0x8F, 0x00, 0x00, 0x00 }, "subsystem-vendor-id", Buffer (0x04) { 0x6B, 0x10, 0x00, 0x00 }, "device_type", Buffer (0x08) { "Airport" }, "AAPL,slot-name", Buffer (0x08) { "AirPort" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } HD4000, renamed GFX0 to IGPU then Method (_DSM, 4, Serialized) { Store (Package (0x04) { "AAPL,ig-platform-id", Buffer (0x04) { 0x03, 0x00, 0x66, 0x01 }, "hda-gfx", Buffer (0x0A) { "onboard-1" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) }
  9. Yragael

    Samsung np300e5c-a0aus

    Hi. My lappy is a NP550P5C, running Mavericks. I think your computer uses an APTIO UEFI Bios, am i right ? If so, you have to disable secure boot and enable Legacy boot for Chameleon, or UEFI only for Clover. You'll also need to force SATA controller to AHCI. I use Clover, now the documentation is understandable. Have fun.
  10. Yragael

    Get your UVC webcam working as Apple iSight

    @ajochope Try with CameraControl. You can find it here: http://www.osx86.net/downloads.php?do=file&id=1693
  11. Yragael

    Help, need a kext for Lion 10.7.2

    With VoodooHDA you have to disable AppleHDA.kext. You can remove it, or remove HDEF device from DSDT, or install a disabler. When VoodooHDA and AppleHDA gets loaded at same time, you get a KP.
  12. Yragael

    HP DV9700 lion install problem

    Start in failsage mode (-x) then re-install chameleon.
  13. Ok, little progress on my side, it seems that Lion's System Profiler requires some data returned by BBIX. On my laptop, i need "UseExtraBatteryInformationMethod" to return some mandatory data, otherwise system_profiler SPPowerDataType hangs (null pointer to some string). Using ACPI3 or ACPI4 method works fine, but only when returning extended informations. As soon as i find the missing parameter, i think we'll be able to fake the system so system_profiler is happy. Strange thing is that now i've lost Power Adapter informations :-( About DSDT cleaning, a good start is to remove devices and methods used only by HP specific windows software, you may look for PNPxxxx strings to know about them, but i would recommend to do it only when your laptop is fully operational. As i already told you, i'm not an ACPI guru :-)
  14. As far as i can see, the problem with System Profiler comes from a null pointer, but i do not know nothing about debugging on Mac OS (trying to learn). Launching /usr/sbin/system_profiler in gdb with parameter SPPowerDataType returns bad access memory at address 0x00000000 As i got same problem, i'll let you know as soon as i have found what is wrong. Please send me IoregistryExplorer report for each kext. What about battery icon or iStat/CoconutBattery ? Do they report correctly ? Forgot to mention, your DSDT includes a lot of windows specific stuff, that you can safely remove.
  15. Sorry, i had no access to insanelymac since yersterday. Do you mean you had AppleACPIPlatform.kext from 10.6.7 ? The modifications i have made in DSDT are only cosmetic, just renamed a few devices and functions, then i have seen two batteries so i told you about glsy looking for tester with 2 batteries computer. I have found a thread about dv6x20s with interesting informations, you can find it here. I'm gonna look if i can help you, but i'm far from being an ACPI guru :-( Edit: Can you try this dsdt ? rewrote some parts of UPBS and UPBI to get 8 bits values from EC0. Also added ARPT and FRWR devices, reorganized code so it is more readable in DSDT Editor. let me know how it works please. dsdt_6510b.zip Another thing, can you check with AppleSmartBatteryManager, then with AppleACPIBatteryManager ?