Jump to content

Cheops

Members
  • Content count

    65
  • Joined

  • Last visited

About Cheops

  • Rank
    InsanelyMac Protégé
  1. Lenovo Ideapad S12 Ion Development Thread

    Hi, I have since had to get rid of the S12 due to unforseen reasons. However I do have a backup of the DSDT and kext I was using for the battery. This DSDT has been seriously cleaned up and alot of the inspiration was taken from "tHE KiNG" so big thanks to him, you will also need to use the attached AppleACPIBatteryManager.kext, delete the voodoo stuff this is not needed. I hope someone can continue this work and good luck. Cheops S12DSDT.zip AppleACPIBatteryManager.kext.zip
  2. *WORKING* AppleHDA - ACER TUBA BASS SUBWOOFER

    So you managed to get the bass working on voodoohda?
  3. Lenovo Ideapad S12 Ion Development Thread

    Yes I will post when I iron out a few more problems specifically USB OHCI. If you want to check you will find AppleACPIEC.kext is not always loaded and causes many problems, even when it does, its not working correctly. More good news managed to fix the Lid Sleep/Wake in DSDT today. Cheops
  4. Lenovo Ideapad S12 Ion Development Thread

    Hi, I have managed to get VANILLA Battery Power management working, by identifying a problem with AppleACPIEC.kext not loading correctly and AppleGraphicsPowerManagement.kext with DSDT fixes, this is currently now giving me 5-6 hours battery life. Cheops
  5. Hi, I have posted here a fully working AppleHDA for ALC268 on Acer 7720g, I am pretty sure it can be adapted for other acer laptops to get the bass working properly, give me a should if anyone has any problems http://www.insanelymac.com/forum/index.php...p;#entry1640431 Cheops
  6. Lenovo Ideapad S12 Ion Development Thread

    For sound I found this one works perfectly only down side is no HDMI audio, but i'm working on new kext with this. http://www.kexts.com/view/847-alc_269_mod....udiofamily.html Cheops
  7. Acer Laptop users (Intel).

    Hi All, I have attached an AppleHDA.kext that works with Tuba ( Subwoofer bass ) instead of just the tinny tweeter speakers, I have tested it on my Acer 7720g laptop and it works perfectly. You need to create an aggregate midi device and add the 2 sets of internal speakers and assign the speakers. If you want to play mp3 etc through all speakers at same time you need to use sunflower and au labs(xcode), there are tutorials on how to do that on this site. Thanks Cheops AppleHDA.kext.zip
  8. Hi, My laptop has 2 sets of speakers, 21->16->3 ( L/R Tweeters ) 22->14->2 ( Single Bass ) I have defined my pathmaps like the following, However when I try and play I get stuttering! Can anyone see whats wrong with my layouts? Thanks
  9. ALC268 Audio - Can anyone help?

    Hi, I have an Acer 7720g Laptop with the Realtek ACL268. I have tried implementing my pin config data and also the pathmap items but I am not getting any audio from my speakers, I am getting very confused. On my hardware I have 2 normal speakers on top node 0x15 and a bass sub speaker on node 0x16 both nodes need to be playing at the same time to produce quality sound. On Ubuntu I have to do the following command to enable the bottom speaker to enable it. hda-verb 0x16 SET_AMP 0xb000 I would be very grateful if someone could please check my AppleHDA.kext for discrepencies. I have attached what I think is needed for this including linux codex dump, graph, windows verbs. Any help much appreciated. Cheops. ALC268_Info.zip
  10. Problem Acer Aspire 7720g

    The main problem with the sound is the bass speaker at the bottom its not activated. I have figured this out and know how to activate it, I just need to get a working AppleHDA first.
  11. Lenovo Ideapad S12 Ion Development Thread

    Thank you for the information My Bluetooth refuses to work it's not even found on the system Are you using any specials enablers kexts for this? It works fine in windows and Linux just not found in osx. Thanks Cheops
  12. Lenovo Ideapad S12 Ion Development Thread

    Hi Keyno, How dod you get the Wifi to work without taping pin 20? Mine doesn't show up under USB Devices, But it works fine in Linux and Windows. I would like to know if the device is the same model as mine Vendor ID = 0x0a5c Product ID = 0x2150 Thanks Cheops
  13. Lenovo Ideapad S12 Ion Development Thread

    Could people tell me if they have managed to get bluetooth working on the ION version? my device is 0xa5c, 0x2150? Thankyou Cheops
  14. Lenovo Ideapad S12 Ion Development Thread

    This is all you need for ION Version. S/L/E _BroadcomUSBBluetoothHClControllerEnabler_0x0a5c_0x2150.kext _NullCPUPowerManagement.kext ** _VoodooHDA.kext _VoodooPowerMini.kext ** E/E AppleACPIBatteryManager.kext AppleACPIPS2Nub.kext ApplePS2Controller.kext CPUIDOverride.kext CPUIDSymbols.kext fakesmc.kext OSXRestart.kext **Currently coding battery DSDT to get red of these. Cheops
  15. Lenovo Ideapad S12 Ion Development Thread

    Hi HNO3 Do you have anything plugged into the USB Ports? I am using MacBook Pro 5,5 in my SMBIOS, Running 10.6.6 All kexts in S/L/E are vanilla, as for my E/E I just have the following:- AHCIPortInjector.kext Not sure this is needed, Needs Investigating AppleACPIBatteryManager.kext Working on this at the moment, Having to recode some of it to handle vanilla power management battery AppleACPIPS2Nub.kext ApplePS2Controller.kext ApplePS2Keyboard.kext ApplePS2Mouse.kext ApplePS2Trackpad.kext All these are obvious. CPUIDOverrride.kext CPUIDSymbols.kext For using AnVal's chameleon for on the fly vanilla kernel patcher. FakeSMC.kext Latest version IOATABlockStorage.kext IOATAFamily.kext IOATAPIProtocolTransport.kext IOSDHCIBlockTransport.kext I think we can get rid of all these, not even sure they are needed, Maybe someone can tell me? OSXRestart.kext Can get rid of this in DSDT as far as I know Best Cheops.
×