Jump to content
InsanelyMac Forum

zaaherux

Just Joined
  • Content count

    9
  • Joined

  • Last visited

About zaaherux

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
    Male
  • Location
    Croatia, Zagreb
  1. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    It depends. So this is how it works (or at least, worked so far). When Apple updates graphics drivers (via big system update or just graphics update as seen some time after 10.6.4) you can try using older driver (since it's independent of other kexts, it will not KP, but you get outdated driver) or get updated one. Driver files should be updated every single time original kexts change because there's some HEX editing involved to get CI/QE, but it could be possible to use older pathed driver again. As long as Apple keeps things simple, this is not a problem. Just be sure to delete all other injectors/enablers from /System/Library/Extensions and /Extras, and use latest Chameleon RC5 with patched drivers and you should be good. Glitches can happen if you have physicaly bad card or cooling isn't good. Boot to Windows and check for artifacts under full load. Glad to help.
  2. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    Just updated PRO and GT drivers for 10.6.5. http://www.insanelymac.com/forum/index.php...t&p=1469651
  3. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    I've just uploaded updated drivers after 10.6.4 graphics update. You can find them here: http://www.insanelymac.com/forum/index.php...t&p=1469651
  4. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    Next time use search and check all posts first in this thread. Anyway try this: http://www.insanelymac.com/forum/index.php...t&p=1469651 What bootloader are you using? You'll get extra folder when using chameleon for example. But all kexts can also work if you put them all in /Sytem/Library/Extensions/. If you're on 10.6.3 or 10.6.4, try http://www.insanelymac.com/forum/index.php...t&p=1469651
  5. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    Yeah, are you sure you did not delete any other ati related kexts? If so, restore them from original 10.6.3 install disk.
  6. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    Best way to check for QE+CI is to simply drag'n'drop a widget on your dashboard. If you can see ripple (waves) effect - it's on!
  7. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    Did you get full qe and ci + resolution? if so, just ignore the stupid warning untill we figure out how to silence it.
  8. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    Check your device id then download appropriate pack. Extract and replace into /Sytem/Library/Extensions/ overwriting originals there. Afterwards run KextHelper KextUtility.v2.3.2.full.Snow.Leo.x64.ready.by.cVad.dmg.zip Use Chameleon 2.0 RC5 r629 or later and set GrpahicsEnabler string to YES or use some other injectors/enablers (EVOenabler, JaminMc, ...). 10.6.5 (32bit and 64bit) - X1950PRO - id: 7280, 10_6_5_7280.zip - X1950GT - id: 7288, 10_6_5_7288.zip 10.6.4 Post Graphics Update (32bit and 64bit) - X1950GT - id: 7288, ati_x1950_7288_10.6.4_Post_Graphics_Update.zip 10.6.3 and 10.6.4 Pre Graphics Update (32bit and 64bit) - X1950PRO - id: 7280, ati_x1950_7280_10.6.3.zip - X1950GT - id: 7288, ati_x1950_7288_10.6.3.zip
  9. zaaherux

    Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

    It was no go for x1950gt on 10.6.3 (device id:7288). But I managed to make it work, full rez, QE+CI, just use JaminMC method and put his kexts in /Extra/Extensions, and use attached kext for /System/Library/Extensions overwriting original. ATIRadeonX1000.kext.zip
×