Jump to content

OS TEST

Members
  • Content count

    13
  • Joined

  • Last visited

About OS TEST

  • Rank
    InsanelyMac Protégé
  1. graphic card nvidia fix

    this may help those that have video issue http://www.tonymacx8
  2. MSI G41M4

    I decided to try this board and since it worked, to share how to get leopard running. you will needed a system that's already running, as non of the popular boot cd would start the os cd. Step one. add a the hard drive to the existing mac computer, i used 10.6 image a cd would work also , now select system/installation/packages/osinstall.mpkg.. this is for those that don't know how to get installation started. [/left]Step 2 choose the package you what to install from the os, do not reboot now select any of the combo updates available i used 10.6.6 and 10.6.7 both worked . Step three i used mulitibeast 3.1.. i selected " ioahciblockstorage.., realtek r1000l, fakesmc, legacyapplertc, usbrollback, voodoo ps/2 controller, 32-bit apple boot screen--if u want 64 bit choose 64bit version, smbios was taken from a diff system i used "mac pro 3.1 identifier", select your theme or load the chameleon of your choosing , select rebuild caches, repair permission. Step four on the hard drive that will be on the msi board i made sure the extra folder have these files " acpimonitor, fakesmc, intelthermal, ioahciblockstorage..., ionetworkingfamily. iousbfamily, openhaltrestart, superiofamily,voodoops2controller. Step five shut down restart. select you user name, after the system is up install your sound if it wasn't done earlier. if you didn't select a boot loader earlier once you reboot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] you can load the boot-loader you wish . now your done
  3. I need help

    first thing are you saying you can boot but have no sound and then also you cannot upgrade. or is it that u cannot boot at all after the install. 1. if you can boot check you board to see what audio chip your board uses. then if your using a dsdt file you need the correct applehda.kext to match your board. eg.. alc 888, 883, 888s, and so on. refer to manual or motherboard box. remember if you upgrade it will break your sound card again so back the sound kext up some where, for after the upgrade process to reload. key note drag and drop of sound driver do not work, use kext helper b7.. 2. on the other hand if you can't boot that because your boot loader is not funtional. and need to be reloaded check out [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.1 it may work for your motherboard, to fixed both issues. i recommend the combo update if you plan to upgrade, however before you restart, fix the audio file and in some case the usb. the usb tend to break on some mother board as i found out the hard way
  4. 10.6.4 to 10.6.6 breaks audio and video

    i am running 10.6.6 and 10.6.7 if you have the audio kext that was working on 10.6.4 using kext helper b7 to load it. remember that some audio file require dsdt and some do not. so its best to used the one that you were using if the system is set up the same way as before. as far as the video goes, its the same process some time just adding graphic enabler = yes in the boot.plist work other time u may have to have the enabler. i would suggest you check osx86 wiki to see if anyone have your video card already working.
  5. GA-EG31M-S2

    i have no idea if this might help and anyone or if anyone can help me. my system is working fulling with out the DSDT. my only prob is that the 8800gts 320mb card so not show QC/QI. system details mother board in header. seagate 750 gig drive 4 gig 800mhz ram 8800 gts 320mb pci-e video card retail mac os you will need a to have a system running mac to get this working steps i followed 1 my dvd was patched with "EP45UD3P Snow Leopard.pkg" already 2 what the heck, i repatched the same dvd with "ES2L Kit ". does it make a diff i don't think but it works 3 while in a working a osx, i formatted the 750 drive as you all know, before i restarted i update to 10.6.1, did not repair permission. the run the "EP45UD3P Snow Leopard.pkg" on the 750gig drive i can't stress this but make sure you remove the dsdt file from "Extra" folder or your system will crash 4 restart system from a work Chameleon , enter 750 drive after setting up, bootable user name/etc. 5 upgrade to 10.6.2 6 this is where i learn the hard way the audio will crash if you go to 10.6.3, before fixing the audio. so note load the audio. mine alc 888. 7 copy the audio kext if they work to the desk, then upgrade to 10.6.3 8 restart the system with kext helper b7, reload the audio from the desktop. 9 finalization just change the file you need, fakesmc 2.5 by netkas, platformUUId, NullCPUPowerMananagement, OpenHaltRestart i had take IOnetworkingfamily from 10.6.0, and lock the network in system preferences if not internet connection disappear. just a side note i used the Nvinject, it allow me to change screen size, as i said earlier not qc/qi, if any one file any way to enable this let me know , no i did not patch my com.apple.Boot.plist. not needed now you can use Chameleon, or not my system boot fine with or with out. i have being testing this for 1 1/2 day now. i don't post alot but hope this helps someone in need. no idea if it will work for other mother boards, its very very stable, ' deep sleep, restart, shut down' works
  6. Fully Working Audio

    no the ich7 the controller chip for audio, usb, video etc i have both 945 g and p 945p carry the HD sigmatel chip and the 945 G have AC97 i have completely activate the Ac97 all the audio features work now i an going to hack the kext on the HD to have every thing not only work but to also show up. when i get it done ill post the pic as proof and offer the kext
  7. Fully Working Audio

    Hi all i dont havr the time to fix the Sigmatel 92xx series card yet , but from the info i post earlier i ahve successfully installed audio for 6 "Front and rear audio" channel on a Lenovo 8288-42U that carries a 82945G and the good thing the audio shows up as i said earlier you need to Hack all the files AppleAC97 AppleHD AppleAzaila if any one need my kext let me let me know from Apple FU Crew http://macfreaks.50megs.com/images/picture_5.png http://macfreaks.50megs.com/images/picture-4.png or try http://macfreaks.50megs.com
  8. Sigmatel 92xx

    i have a intel 945 psn motherboard and all i can get is the HD "linein" to work however i found this on the web that proves that the AppleHDa file should not be the only file to check you might have to hack the Apple *Azalia.kext also http://www.idt.com/products/files/11105894...-pb-0-7_IDT.pdf http://www.idt.com/products/files/11105807...CB1-ER2_IDT.pdf TWO CHANNEL HIGH DEFINITION AUDIO CODEC STAC9200 IDT™ 1 STAC9200 REV B 100206 TWO CHANNEL HIGH DEFINITION AUDIO CODEC DESCRIPTION The STAC9200 is a high quality, 2-channel audio CODEC compatible with the Intel High Definition (HD) Audio Interface (formerly known as “Azalia”). The STAC9200 provides Stereo 24-Bit resolution with sample rates up to 192 kHz. SPDIF I/O provides connectivity to Consumer Electronic equipment. The STAC9200 incorporates SigmaTel's proprietary ΣΔ technology to achieve an estimated DAC SNR in excess of 100dB. The STAC9200 provides high quality, HD Audio capability to notebook and cost sensitive desktop PC applications.
  9. Installing new kernel / natit

    apprently you have to have the new 8.8.1 kernel read this see if it helps http://forum.insanelymac.com/index.php?showtopic=33259 or just get the ppf "test" and the load the natit ot titan.kext search for the files and then read here or search http://forum.insanelymac.com/index.php?showtopic=34448
  10. I can't get a working 10.4.8 on 915 board

    well if you just trying to get accelerated graphics and you have any of jas earlier dvd, once you have loaded the new jas dvd, go in to the ectensions folder and remove the gma 900, 915 and 950 repair permisson do not restart the computer, the put the earlier dvd in the drive , look for the gma 915 or 900 on the new dvd. by going into the cd it think its system/library/installation/packages its the folder that has thethe file osinstall or use finder to search the cd for the package file gma 900, 915 and just run that file only repair disk permission and reboot, that work for me , it may work for you also nothing to lose if you kept on trying to load different dvd, can help with the latest kernel "nebukanezer"
  11. to activate CI/QE nvidia 6600 gt

    after you put the titan or natit kext in the extensions folder remove rm -r /System/Library/Extensions.kextcache rm -r /System/Library/Extensions.mkext then Run the folowing commands in terminal #chown -R root:wheel /System/Library/Extensions/natit.kext or titan.kext chown -R root:wheel /System/Library/Extensions/natit.kext or titan.kext chown -R root:wheel /System/Library/Extensions/natit.kext or titan.kext #chown -R root:wheel /System/Library/Extensions/natit.kext or titan.kext #chmod -R 755 /System/Library/Extensions/natit.kext or titan.kext chmod -R 755 /System/Library/Extensions/natit.kext or titan.kext chmod -R 755 /System/Library/Extensions/natit.kext or titan.kext #chmod -R 755 /System/Library/Extensions/natit.kext or titan.kext or if that does work in the terminal window cd /System/Library/Extensions then run chown -R natit.kext or titan.kext chmod -R 755 natit.kext or titan.kext repair disk permission the reboot this worked for me on a gs7300 with natit.kext others may have used different method
  12. Donate

    I have been reading this forum for days now, and all I hearing is how grateful every one is to Jas. Without him like many others, compiling and creating their own kernel seemed to fail. Now one person made a wonderful suggestion that showed that if everyone would donate $1, Jas would have the money required to get his Mac. A lot of readers here may say that’s good, but do nothing. How many of you thought that if he had a Mac, maybe the files would be a lot easier to view and recode. It was also stated that Pay Pal takes 35C per dollar, well then, donate $1.35. I am not saying to give $1.35 only, but to give whatever you can. Your gratitude and appreciation goes a long way. But the truth is, having a Mac to decode files, that’s given back to the OSx86 project goes even further. That’s my two cents. Ok guys show your appreciation by donating. It’s not that difficult. Think of what would happen if he stopped coding or just left the Project ? If you have found me helpful,then please give something back & help me http://www.macforjas.com/donate.html Also if you're looking for some different wallpapers try some of these Thanks McSkywalker Donations so far : $1,200.74 Top donator : Lambusser : $100.00 Average donation per donator : $21.07 Total donations needed : $2600 Percent to goal : 46.18%
  13. Jet Li Fearless Coming Friday

    That Movie is not new, just like most of his movie that's release here, if you look on the his web site and torrent site you will find reference to the origianl release date and the name. then you can google, go to the video store, or torrent.
×