Jump to content

lukarak

Members
  • Content count

    7
  • Joined

  • Last visited

About lukarak

  • Rank
    InsanelyMac Protégé
  1. The Sims 3 (or Medieval)

    Hi I installed everything, updated with all the latest patches. I use a GTX 480, and it outputs something like this on the main screen. I copied the installation to my macbook pro, and it works just fine, so it must be the Fermi drivers. Does anybody know of a workaround? I use 10.7.2, which works out of the box, with the open CL edit.
  2. boot0: done hang

    I recently used Migration assistant to transfer my existing user and applications from one hackintosh to another. After i did and rebooted them both, the source hack won't boot anymore. It goes through: boot0: GPT boot0: test boot0: test boot0: done and stops there with a blinking cursor. I can use an [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] CD for example, to get to OS X but then half of my hardware doesn't work. Are there any ideas? This has occured once before, also after using migration assistant, but then I just thought it was some kind of fluke and reinstalled it again. I tried reinstalling chameleon, but it hasn't helped. System is: EX58-UD5 12 GB DDR3 i7-920 NVIDIA GTX 480 160 GB SATA drive
  3. Hi, I had the same problem. I found out that i was using 4 outs 2 ins kext, but for digital output to work, i had to use the 3 outs 2 kext (for the same chip ofc.)
  4. I finally managed to get it to work. The final solution was: AppleHDA.kext, unmodified but not from 1.6.2 SL. I had to use 1.6.1 (you can find that in tonymacs snow leopard folder), installed via Kext Helper. LegacyHDA.kext from the first post : http://www.insanelymac.com/forum/index.php...st&id=53344 installed by copying to Extra/Extensions I used the 3ins2outs HDA kext, since it was the only one to give me digital output, the ones with 4 outs had no digital output. After that i ran both System/Library/Extensions and Extra/Extensions through Kext Utility and then repaired permissions for the disk using Disk Utility, rebooted and everything worked, i just had to pick the desired output from System Preferences -> Sound. Now i finally have a digital link between my Z-5450 speakers and my 'Mac'. Thanks for help everybody.
  5. Hi, i'm writing again since i got no anwsers and wasn't able to get any sound while trying almost all of the combinations described on the first page. I have the following section in my DSDT file: Device (HDEF) { Name (_ADR, 0x001B0000) Method (_PRW, 0, NotSerialized) { Return (Package (0x02) { 0x0D, 0x05 }) } Method (_DSM, 4, NotSerialized) { Store (Package (0x0A) { "built-in", Buffer (One) { 0x01 }, "codec-id", Buffer (0x04) { 0x85, 0x08, 0xEC, 0x10 }, "layout-id", Buffer (0x04) { 0x75, 0x03, 0x00, 0x00 }, "device-type", Buffer (0x10) { "Realtek ALC889a" }, "PinConfigurations", Buffer (0x28) { /* 0000 */ 0x10, 0x90, 0xA1, 0x01, 0x20, 0x90, 0xA1, 0x02, /* 0008 */ 0x80, 0x30, 0x81, 0x01, 0x90, 0x40, 0x21, 0x02, /* 0010 */ 0x30, 0x40, 0x11, 0x01, 0x40, 0x40, 0x01, 0x01, /* 0018 */ 0x50, 0x60, 0x01, 0x01, 0x60, 0x20, 0x01, 0x01, /* 0020 */ 0x70, 0x61, 0x4B, 0x01, 0xA0, 0x01, 0xCB, 0x01 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } I am using an original AppleHDA.kext from SL 10.6.2, i'm not sure if this can remain unchanged. I tried almost all legacy kexts available on the first page, but to no success. I'm just not sure what to try next. The board is Gigabyte's P55-UD5, with Realtek ALC889A. User osxchat had the same board and he extracted a codec dump and posted it here. What is that for exactly? Any help would be apreciated, i'm really at a loss here.
  6. Hi I have a Gigabyte P55-UD5 board with ALC889A sound. Currently, the only thing i was able to get was stereo sound from the green jack using VoodooHDA.kext However, since i have a SPDIF input speaker system, i would very much like to make at least SPDIF output to work. I am using a modified DSDT.aml from here, a vanilla AppleHDA.kext that I patched with the codec info i found on page 32 (poster osxchat has the same board), and a Legacy kext i got from the first page, 885 from the first post link (i used a 3 outs 2 ins HDA kext for 885) There are no devices for sound, but i'm getting this in system profiler under audio: Device ID: 0x1458A102 Audio ID: 885 And a list of all available devices. Are there any ideas? Thanks in advance.
  7. Would you try using appleHDA from 10.6.1? I heard 10.6.2 has some problems in that area.
×