Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
So when booting my computer I get this error IOPCCard info: Mac OS X PCMCIA Card Services 3.2.8 IOPCCard info: options: [pci] [cardbus] [pnp] IOPCCard info: Intel ISA/PCI/CardBus PCIC probe: IOPCCard notice: Bad bridge mapping at 0xd2100000! IOPCCard info: no bridges found. IOPCCardBridge::start failed Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2200BT PL FUJITSU MHV2200BT PL/IOFDiskPartitionScheme/Untitled 1@1 and thus the PCMCIA slot wont turn on, yet when I turn my onboard lan off in the BIOS it loads perfectly fine and says this: OPCCard info: Mac OS X PCMCIA Card Services 3.2.8 IOPCCard info: options: [pci] [cardbus] [pnp] IOPCCard info: Intel ISA/PCI/CardBus PCIC probe: IOPCCard info: TI XX12 rev 00 PCI-to-CardBus phys mem 0xd2108000 virt mem 0x47898000 IOPCCard info: host opts : [serial pci & irq] [pci irq 17] [lat 168/176] [bus 3/3] IOPCCard info: PCI card interrupts, PCI status changes Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2200BT PL FUJITSU MHV2200BT PL/IOFDiskPartitionScheme/Untitled 1@1 IOPCCard info: cs: cb_alloc(bus 3): vendor 0x168c, device 0x0013 IOPCCard info: cs: cb_alloc(bus 3): found 1 functions IOPCCard info: cs: cb_config(bus 3) IOPCCard info: fn 0 bar 1: mem 0xd2020000-0xd202ffff IOPCCard info: irq 17 Any idea what I need to do/modify to get this working?
gamerman315 posted a topic in OSx86 10.5 (Leopard)Ok so I posted a couple days ago asking for help getting OS X installed. I was successfully able to install OS X 10.5.7 using iAtkos v7. So from what I have noticed, UPDATE: SOUND WORKS CHECK BOTTOM FOR DETAILS, wireless doesnt work, and PCMCIA doesnt work unless the onboard lan is off. So my question was when I have onboard lan turned off in the BIOS the PCMCIA slot powers on and "works". but when the onboard lan is on in the BIOS it says something like IOPCCardBridge::start failed on startup. Now in this post http://www.insanelymac.com/forum/index.php?showtopic=81036 it says at the top "You do not have to edit the info.plist to match your machine. If your pccard shows 'IOPCCardBridge::start failed', you can give it a try." So what I was curious about is how to go about editing this file and what would I edit? The next question would be can anyone point me in the right direction to maybe getting wireless to work? The wireless card is a Intel® PRO/Wireless 3945ABG Network Connection. So if you want to know how I successfully installed OS X 10.5.7, read this: ________________________________________________________________________________ _ So for people with a laptop like mine. I had the most up to date BIOS firmware 4.70 and what you need to do is update the bios, then after you restart press f2 for setup. go into the advanced tab and disable onboard lan (might cause kernel panic during installation) and disable multi-core processing. Then make sure the extra bit option that's on that page is enabled. boot to the iAtkos v7 disc and press f8 before the timer runs out. type in -v cpus=1 and press enter. Let it boot, format the partition as Mac OS Extended Journaled by going to Utilities-> Disk Utility. Then continue the installation. When it says customize, the patches I used were all the default ones plus the battery one, NVKush, under network/wired I selected both intel drivers, original ApplePs2, the cardbus, and usb patches. Then install. after installation restart and boot into mac. Once you have access to everything open up the terminal and type in: sudo nano /Library/Preferences/SystemConfiguration/com.apple.Boot.plist then make it look like this <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>-v cpus=1</string> <key>Boot Graphics</key> <string>Yes</string> <key>Quiet Boot</key> <string>No</string> <key>Timeout</key> <string>5</string> </dict> </plist> once you have changed that one line hit ctrl-x, y, then press enter. Now you can restart and reenable in the bios multi-core processing and onboard lan. thus now you should have an almost all the way functional computer minus UPDATE: SOUND WORKS CHECK BOTTOM FOR DETAILS, and wireless. ________________________________________________________________________________ _ UPDATE: TO GET SOUND WORKING To get the sound working you need to patch your dsdt. so to start download the latest patcher here http://www.insanelymac.com/forum/index.php...pic=133683%2522 run the patcher and most likely you will have compile errors. Now I followed what geiman said in a couple of his posts so here: So follow the debugger it will tell you what lines you have errors on, and just comment out the entire while loop, and others will just have a single line that need to be commented out. After you have fixed your dsdt you need to recompile it. In order to recompile, you need to do this: So by default when you install iAtkos v7 it installs chameleon2 bootloader which already has dsdt support. If you didnt install chameleon2 then you will need to use the search function to figure out how to get the os to boot with the patched dsdt. So essentially use the dsdt patcher once, edit your dsdt_fixed.txt file and comment out the errors, then recompile. Move the now compiled dsdt.aml file to "/" and then you will need to install Azalia audio drivers. Then once you restart you should have working audio! So I will post the azalia drivers ripped from iAtkosv7, and my edited dsdt file. ________________________________________________________________________________ _ UPDATE: TO GET SCROLLING TOUCHPAD WORKING! You should follow this tutorial http://www.insanelymac.com/forum/index.php?showtopic=88811 I will post my settings if you would like to use it. Now on to tackle wireless! azalia.pkg.zip dsdt_fixed.txt dsdt.aml.zip com.apple.driver.ApplePS2Trackpad.plist.zip
So I figured this might be a long shot but has anyone had any luck installing OS X 10.5.X? I have searched through the forums and atanasko has appeared to have successfully installed it on this laptop. On the wiki http://wiki.osx86project.org/wiki/index.ph...lite_P105-S9722 it has a little bit of information. with the same information in this thread http://www.insanelymac.com/forum/index.php...d&start=200 Anyways I have attempted to install Kalyway 10.5.1 onto my laptop after downgrading the BIOS firmware to 4.2. I have tried a variety of different customizations within the install. Everytime the install succeeds but upon reboot I get a black screen with a flashing underscore cursor in the top left. Has anyone else experienced this issue or know a workaround? I am having to install Leopard because a class I have this semester requires us to do some Iphone development. Thing is in order to develop you have to have 10.5.6 or higher to work. So my next question is even if I get this working will it be possible to upgrade to 10.5.6? and if so how? Thanks for any help I can get!