Jump to content
InsanelyMac Forum

wyxz2008

Members
  • Content count

    15
  • Joined

  • Last visited

About wyxz2008

  • Rank
    InsanelyMac Protégé
  1. Please add support for my card reader: Realtek PCIE CardReader Driver Vendor ID: 0x10ec Device ID: 0x5229
  2. My sound adapter (creative audigy 2 nx) doesn't work too. Maybe it is because: Limitations: Isochronous endpoints are not supported yet. This includes anything having to do with audio or video (webcams too.) If you try to connect devices with isoch endpoints, and OS X has an upper layer driver for the device, it'll fail to configure the device and you'll probably see some messages about it from IOUSBFamily in syslog.
  3. I hope this post can help you: http://www.o-learn.com/content/how-to-fix-10-minutes-to-boot-mountain-lion-timeout-waiting-for-iokit-to-be-quiet
  4. My t510 often crashed. It turned out it was the memory. Memtest reported errors. I replaced the bad memory, and since then my t510 has been working fine.
  5. Set boot screen brightness... interesting. Could you upload this patcher?
  6. This new dsdt.aml doesn't work on my T510. I still have 100% brightness on boot, and the shortcuts to adjust brightness are still there.
  7. This dsdt with NVMT section works with my lion. Can it be adjusted to work with ML?
  8. Sorry. I know the code block may allow me adjust default brightness, but I don't know the details. Some said it might work like this (he wasn't sure): 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00 - level1 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x03, 0x03 - level2 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x06, 0x06 - level3 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x09, 0x09 - level4 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x0C, 0x0C - level5 0x00, 0x08, 0x00, 0x00, 0x30, 0x02, 0x00, 0x00 - level6 I copy the code block from here, it is in Chinese. I translate the first post here: How to set default brightness -- should work on all laptops that can adjust brightness If there isn't @0,NVMT block, you need to add one. Its values are: 0B03FF20 0610909C 00052003 8F053005 50050000 4E032303 29030000 20435204 00000101 E0000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 FFFF0000 00000000 40FF1005 01000000 00000000 00080000 80000000 The last value 80000000 is the value of AppleBacklightAtBoot in PNLF. I use the value of macbook air2,1. It is 80030000, which should be 0x380. After my modification, the brightness should be 0x80.
  9. It's said the last line can be one of these (from dark to bright): 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x03, 0x03 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x06, 0x06 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x09, 0x09 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x0C, 0x0C 0x00, 0x08, 0x00, 0x00, 0x30, 0x02, 0x00, 0x00 The values I gave on my last post are what I used for my lion system. I think they should be ok. There is no "@0,NVMT" block on your dsdt, and I have tried copy the block into it, but my laptop booted up Mountain Lion with a black screen with my modified dsdt file. I have no idea what was wrong.
  10. joshhh, I got no luck with your code. I tried the value x14 with both your T510 and macbook pro 6.2 DSDTs, but nothing changed, and the brightness was fixed at 100%. Here is a block code from my old DSDT.aml file. I can adjust the default brightness value by changing the last line of "@0,NVMT" section (/* 0058 */). I have been trying migrating following code to your DSDT.aml, but because I know little about DSDT, I haven't have any luck do it right. Will this method work? Method (_DSM, 4, NotSerialized) { Store (Package (0x08) { "AAPL,backlight-control", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "@0,NVMT", Buffer (0x60) { /* 0000 */ 0x0B, 0x03, 0xFF, 0x20, 0x06, 0x10, 0x90, 0x9C, /* 0008 */ 0x00, 0x05, 0x20, 0x03, 0x8F, 0x05, 0x30, 0x05, /* 0010 */ 0x50, 0x05, 0x00, 0x00, 0x4E, 0x03, 0x23, 0x03, /* 0018 */ 0x29, 0x03, 0x00, 0x00, 0x20, 0x43, 0x52, 0x04, /* 0020 */ 0x00, 0x00, 0x01, 0x01, 0xE0, 0x00, 0x00, 0x00, /* 0028 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0030 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0038 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0040 */ 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, /* 0048 */ 0x00, 0x00, 0x00, 0x00, 0x40, 0xFF, 0x10, 0x05, /* 0050 */ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0058 */ 0x00, 0x08, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00 }, "@0,backlight-control", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "@0,pwm-info", Buffer (0x14) { /* 0000 */ 0x01, 0x14, 0x00, 0x64, 0xA8, 0x61, 0x00, 0x00, /* 0008 */ 0x1C, 0x02, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, /* 0010 */ 0x00, 0x04, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) }
  11. Thank you, joshhh. Now ML is on my T510. Your AppleIntelE1000e.kext is 1.6.2, and it should be replaced by new 2.0 one. My netcard can't reconnect if I plug out the cable. New kext fixes the problem. Almost everything else works well. Only one thing bothers me: I can not save the brightness setting. My display is too bright with 100% value. It will be great if the brightness defaults to 20%. I know how to adjust the default brightness with my old DSDT.aml file, but it doesn't work on the new one you posted above. Can you tell me how to do it?
  12. wyxz2008

    Custom DSDT for Lenovo T510-4313 Thinkpad

    Thanks for the DSDT file. It works great. BTW, I also found another version of DSDT file for T510 here: http://www.insanelymac.com/forum/index.php?showtopic=274218
  13. Thanks a lot. I use your DSDT.aml and kexts and my T510 almost works perfectly with Lion 10.7.3, except: 1. My keyboard and mouse will not work (usb mouse and t510's trackpad can move, but can not be clicked) in the first few minutes after the system is booted. 2. I see lots of error log like this: (I googled about it, and found some one replaced error msg in the AppleHDA file with 000000…00000s to bypass the problem, but I did not try it becasue I didn't have a hex editor.) 3. My t510 has an i5 540m CPU, I don't know how to check whether Speedstep and turboboost work or not. 4. As you said, after wake up from sleep, usb doesn't work. BTW: Because my note book sometimes would not boot up, I have removed the following string from my org.chameleon.Boot.plist. And I had to add to org.chameleon.Boot.plist, or it could not start up too. Thank you again for your guide.
×