Jump to content

DoGuiTTo

Members
  • Content count

    33
  • Joined

  • Last visited

About DoGuiTTo

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
    Male

Recent Profile Visitors

1,152 profile views
  1. DoGuiTTo

    Ozmosis

    Thanks Griven, I managed replace the Osmosis.ffs patchedFakeSCM*.ffs plus the InjectorKext.ffs and DisablerKext.ffs from your zip in the BIOS. Removed the OsmosisDefaults.ffs as I have it on /Oz Is there a way to load APFS.efi and after that HighSierr, like if I put it on CLOVERx64drivers (or whatever it is called) ? And HermitShellx64.efi (when needed) ?? Thanks... Regards
  2. DoGuiTTo

    Ozmosis

    Hi Griven, Could you make a Z87N-WIFI High Sierra ROM ? Attached is your Modded ROM posted on hackintosh-forum forum that I use in my machine. Thanks. Regards. Z87NWIFI-F6-Sierra.rom.zip
  3. DoGuiTTo

    Clover Problems and Solutions

    Sorry and thanks.
  4. DoGuiTTo

    Clover General discussion

    Hi, I bought a multi-card reader / USB for my front 3.5 panel in my hackintosh because I use it for Id authentication purposes. The model is listed below. http://www.tooq.es/product_detail.php?id=1511 Without it installed I can boot my hackintosh perfectly with all versions of clover that I had tried. With it conected it stops in the Gigabyte logo just before the Clover screen. If I try to boot directly in Windows, without passing trought Clover it boots perfectly. The same if I disconnect it, and connect it in the Clover screen and then boot. I had Oz before and everithing works perfectly but now I need Clover as it is more powerfull in features and can do Kext-Patch on the fly. I need it to get Wifi on Sierra. ¿Does anyone know if it is a know issue or how to solve it? Thanks in advance. Regards, Doguitto.
  5. DoGuiTTo

    AppleALC — dynamic AppleHDA patching

    It worked. Thanks !!
  6. DoGuiTTo

    Ozmosis

    Hi, I have one question regarding Osmosis: ¿Is there a way to make on-the-fly patches (KernelAndKextPatches) like in Clover? My hackintosh is working perfectly but for ALC892 and HMDI Audio to work I had to apply binay patch (modding original Kexts). When I used Clover my OSX install was perfectly without modding any kexts in S/L/E. Sorry for my bad English. DoGuiTTo
  7. Hi guys ... I solved it ... and it was the only thing I didn't looked at (HDMI Cable). I discovery that when I booted Windows and HDMI audio wasn't working there too... sorry for the waste of time ... Now I have my 100% hackintosh working again.
  8. Any news about this problem? In 10.9.3 I don't have this issue. Only in 10.9.4 which I'm using. I just have to wait for 10 seconds to get everything perfect. Thanks.
  9. Hi, I had a perfect Hackintosh dual boot (OS X and W8) with Clover UEFI. Everything was working perfectly (Wifi with 5Ghz, Bluethooth, Audio, etc). So today I applied the 10.9.4 update knowing that the only issue would be the HDMI sound (worked fine but I used my speakers). Now, every time I boot into system I got this screen for about 10 seconds and then everything goes OK. I think that its a CLOVER problem because I didn't change config.plist in clover after update. If I disable Inject Intel on CLOVER the system boots fine with QE/CI acceleration enabled too. Does anyone else have the same issue? By the way this is my CLOVER config.plist and also uploaded boot.log. The version of CLOVER is 2747 My specs are: GA-Z87N-WIFI Intel Haswell i5 4750 Azurewave AW-CE123 (changed the original that came with MB) Samsung SDD 840EVO WD 2TB 8GB RAM 27" Philips Monitor bootlog.log.txt config.plist.zip
  10. Hi thornton.as, I can say my system is full stable. With 10.9.3 it was perfectly (all the patching I did with clover except the HDMI patch) so I was like an real mac, no freezes at all. Now with the 10.9.4 I don't have HDMI and have this little issue with the first 10 seconds on the boot process (I hear the Skype sound before the screen turn back to normal). For me Mavericks is perfectly and I use it as my first OS over W8.1.
  11. Hi, I had a perfect Hackintosh dual boot (OS X and W8) with Clover UEFI. Everything was working perfectly (Wifi with 5Ghz, Bluethooth, Audio, etc). So today I applied the 10.9.4 update knowing that the only issue would be the HDMI sound (worked fine but I used my speakers). Now, every time I boot into system I got this screen for about 10 seconds and then everything goes OK. I think that its a CLOVER problem because I didn't change config.plist in clover after update. If I disable Inject Intel on CLOVER the system boots fine with QE/CI acceleration enabled too. Does anyone else have the same issue? By the way this is my CLOVER config.plist and also uploaded boot.log. The version of CLOVER is 2747 My specs are: GA-Z87N-WIFI Intel Haswell i5 4750 Azurewave AW-CE123 (changed the original that came with MB) Samsung SDD 840EVO WD 2TB 8GB RAM 27" Philips Monitor EDIT: Hi guys ... I solved it ... and it was the only thing I didn't looked at. The HDMI Cable ... I discovery that entering in Windows and noting that HDMI audio wasn't working there too... sorry for the waste of time ... Now I have my 100% hackintosh working again. config.plist.zip bootlog.log.txt
  12. I just open the ATIRadeonX1000 with an hex editor, search for 8771 (find it 2 times) and change it with 4571.
  13. You're right. I took an original ATIRadeonX1000.kext (extracted from SL10.6.7 Combo Update with pacifist) and changed only the Info.pslit. The result was NO CI/QE enabled. I bin patched again with my card id and got everything working again. Sorry for anyone who wasted time ... So ... add to my steps the bin patching ... Regards ...
  14. Azimutz, Sorry for my bad english but I'm glad you understood what I said. In my case, by just editing the Info.plist works. No bin patch required. EDIT: I bin patch my ATIRadeonX1000 and got the same results ... maybe in my case doesn't matters. Razorbackeve, Maybe (first try to bin patch the ATIRadeonX1000) you have to change other card ID with yours. The X1450 is not the same as X1400. Try to change other values with your device ID. Change the 0x71421002 with yours. Always try both things ... with and without the bin patch ... Ciao...
  15. Hi Azimutz, Sorry for the delay. I had to reinstall everithing because of the 10.6.8 update and had no carbon copy made ... I did a clean install with Iatkos S2 v2, then update to 10.6.7 directly. After that I update my kernel to 10.7.0 with the one modified by nawcom (not required). To get the graphics working I bin patch ATIRadeonX1000.kext/Contents/MacOS/ATIRadeonX1000 and changed every 7187 with 7145. In the ATIRadeonX1000.kext/Contents/Info.pslit I changed 0x71871002 with mine that is 0x71451002, rebuild cache kext and reboot. Here I got CI/QE enabled. To get the fullres I installed the latest Dongs kext as it is and edited my boot.plist and add a line form my resolution. Rebuild kext cache and rebooted. Voila ... full everything ... My ATI X1400 have that device id (extracted with lspci): 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145] (prog-if 00 [VGA controller]) Subsystem: Dell Unknown device [1028:2002] Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d0000000 (32-bit, prefetchable) I/O ports at ee00 Memory at efdf0000 (32-bit, non-prefetchable) Expansion ROM at efe00000 [disabled] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [100] #1002 Capabilities: [714] #ee01 By the way, nice work with GE. If need something else ask... Ciao...
×