Jump to content
InsanelyMac Forum

johnak47

Members
  • Content count

    16
  • Joined

  • Last visited

About johnak47

  • Rank
    InsanelyMac Protégé
  1. johnak47

    9500 GT Lion

    Hello i have a Inno 3d 9500 GT , lion detects my card although when i try to play chess it fails so i am not getting full acceleration i tried the nvenabler64 next however this does not work and about this mac shows 1mb v ram does anyone have any ideas to how i could get my card fully working and recognised
  2. johnak47

    Lion AMD

    Hello is it possible for Lion install on AMD cpus or atom cpu ???
  3. johnak47

    [AMD] 10.6.8 Guide - written by Devout

    Yes i checked it with no success I posted my dsdt on the dsdt forum if you could perhaps have a look and see if it is a problem with that as i am not 100% sure about dsdts , i have been researching for a month with no progress. I feel like i am ready too give up on the osx86 project until i get a new system as it is rather annoying only having 1 core enabled, you genuises are my last hope I use my system for music production and djin so it is a big loss of resources only having 1 core enabled. would any other boot flags help me , the flags i tried usually were arch=i386 cpus=2 busratio=18 -v (my cpu is only x 13 ) but as the guide stated i tried too see if it made a difference yet i still cannot get it booting with 2 cores Thanks for Reading
  4. Hello, I have been trying too get Snow Leopard running with both cores for around a month now with no success. I Beleive it must be to do with the dsdt as it works in single core mode no problem My chipset is a AMD 690 and the motherboard is a MSI K9 AGM 3 CPU is a 2.6ghz LE 1640 x2 I tried removing the cpu alias code yet this hasnt worked here is a copy of the unmodified dsdt Really hope one of you Geniuses can help with my problem DSDT.aml.zip
  5. johnak47

    [AMD] 10.6.8 Guide - written by Devout

    Hello thanks for the advice, the motherboard i have is quite basic when it comes to bios settings i have nothing at all for overclocking/changing cpu parameters. I tried usbbusfix=yes with no success i am going too post in the dsdt forum see if any expereinced users would be able too pick up any problems i have perhaps missed if anyone else could help me in the right direction it would be much appreciated =D
  6. johnak47

    Lion AMD

    Hello , has lion been ported for amd yet ???
  7. johnak47

    [AMD] 10.6.8 Guide - written by Devout

    Hi there i have followed this guide got osx installed updated to 10.6.8 got the drivers working , however my cpu only ever loads with one cpu core Im using a amd 690g chipset on a msi k9agm 3 motherboard, cpu is a AMD Le 1640 Dual core 2.6ghz i have tried the flag cpus=2 also tried optimising the dsdt in dsdtse yet i still cannot boot with both cpu cores enabled, Do you have any bootflags or advice that i should try as i am unable too use the computer with one core it is just too slow
  8. johnak47

    gfx query

    Hello i have recently set up hackintosh on a amd system, I am using haard 10.6.2 the install goes fine yet when i run cpus=2 flag it never boots showing both cpu cores and my system is usable but too slow too use everyday is this problem perhaps because i never have managed too get the video driver installed is it standard for osx to only run 1 core until the video drivers are loaded correctly??? any pointers would be great im using a 2.6ghz dual core amd with a amd 690 chipset and a nvidia 9600 1gb video card any help would be much appreciated thanks guys
  9. johnak47

    [AMD] 10.6.8 Guide - written by Devout

    Hi there i am currently running 10.6 10a432 hazard release. i followed your guide restored the 10.6.3 retail to a partition on my 500gb osx drive, the partition with my restored install dvd is 0,7. i restored the image installed modusb , yet it didnt find the modbin kernel i tried selecting 0,0 as partition too boot as you state in the tutorial again no joy could not find kernel. im assuming i need too change the rd command too 0,7 as thats where the install image is i have followed the further guide using my hack and the boot cd 10.5 instructions copying the extra and usr folders yet when i boot it gets to loading darwin kernel then crashes , there is obviously something i am missing as it cant find the amd kernel , can you give me any advice too what i should try next thanks
  10. johnak47

    AMD CPU Problem

    Hello there , i am using snow leopard 10.6 gm hazard release to boot to SL i can not get it running with both CPU cores. I ran a copy of marvins amd utiility to patch the CPUIDS right after install , when i try to boot using the cpus=2 flag, only 1 cpu core only ever shows up in system info , the cpu itself is a AMD 2.6ghz am2+ dual core . i find it too slow too work with in single core mode as i am always usually running DJ software or Music making programs and really want too try get something sorted asap the motherboard in question is a msi k9agm3 i have no bios updates and no customiation for cores in my bios . also 2 things im slightly unsure of , the FAKESMC and DMOS from the hazard install disk were left as default could perhaps changing any of these settings stop me from booting in dual core mode ??? can anyone point me in the right direction as to anything else that could perhaps help me get this fully set up =D
  11. hi guys i have tried running the cpus=2 flag using the modbin kernel. my amd x2 am2+ 4800 only ever shows 1 core in activity monitor, does anyone have any advice regarding how i could perhaps fix this?? thanks im using i atkos 10.5.7 in the cpu options i think i didnt check speedstep is that perhaps why it didnt work or should i leave that unchecked
  12. johnak47

    MSI K9AGM3 DSDT Help

    Thanks for the advice i will try furrther editing the dsdt file on my netbook with snow leopard tonight. I beleive my Kernel Panics may have something to do with the dsdt settings not being correct so by recompiling the dsdt i am hoping too acheive being able too boot into osx on my main machine i will add a copy of my KP to see if you guys can shed any light to what is going wrong, Thanks Again for your help guys Much appreciated =D
  13. hi guys could anyone shed any light on this kernel panic. specs are amd 2.5ghz dual core am2 msi k9agm 3-fih running onboard video i ran marvins amd utility and tried using dsdt patcher gui yet i can still not boot , the boot flags i used were -v -x -s -f
  14. johnak47

    MSI K9AGM3 DSDT Help

    Hi there i am having problems with my hackintosh , the install succeeds i have tried the dsdt patcher gui however there was no joy it didnt boot Instead I am trying acpi patcher beta instead , I am using a msi k9agm 3 board once i have generated the fixed dsdt.aml file does this need recompiled or do i just go ahead and copy it too extra/extensions here is a copy of the log if anyone could give me any further pointers in the right direction Thanks for your help guys Intel ACPI Component Architecture AML Disassembler version 20081204 [Dec 4 2008] Copyright © 2000 - 2008 Intel Corporation Supports ACPI Specification Revision 3.0a Intel ACPI Component Architecture ASL Optimizing Compiler version 20081204 [Dec 4 2008] Copyright © 2000 - 2008 Intel Corporation Supports ACPI Specification Revision 3.0a dsdt.dsl 4873: Acquire (MUTE, 0x03E8) Warning 1104 - ^ Possible operator timeout is ignored dsdt.dsl 4887: Acquire (MUTE, 0x03E8) Warning 1104 - ^ Possible operator timeout is ignored dsdt.dsl 4902: Acquire (MUTE, 0x03E8) Warning 1104 - ^ Possible operator timeout is ignored dsdt.dsl 4917: Acquire (MUTE, 0x0FFF) Warning 1104 - ^ Possible operator timeout is ignored dsdt.dsl 4931: Acquire (MUTE, 0x03E8) Warning 1104 - ^ Possible operator timeout is ignored dsdt.dsl 4946: Acquire (MUTE, 0x03E8) Warning 1104 - ^ Possible operator timeout is ignored dsdt.dsl 4961: Acquire (MUTE, 0x03E8) Warning 1104 - ^ Possible operator timeout is ignored ASL Input: dsdt.dsl - 5252 lines, 151782 bytes, 1638 keywords AML Output: dsdt.aml - 16754 bytes, 675 named objects, 963 executable opcodes Compilation complete. 0 Errors, 7 Warnings, 0 Remarks, 57 Optimizations
  15. Hi guys , i currently have a osx 10.5.4 installed and want too update too snow leopard, can i go ahead and update using the retail dvd from my current installation or do i need too get a hacked version for the NC10 thanks
×