Jump to content

EtHeO18

Members
  • Content count

    13
  • Joined

  • Last visited

About EtHeO18

  • Rank
    InsanelyMac Protégé
  1. [GUIDE] 1st Generation Intel HD Graphics QE/CI

    Seems like you know what you're doing, at least This is my SMBios.plist, I could post my entire /E, /S/L/E, /L/PP too if you want. $ cat /Extra/SMBios.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/ PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>SMbiosdate</key> <string>07/26/10</string> <key>SMbiosvendor</key> <string>Apple Inc.</string> <key>SMbiosversion</key> <string>MBP61.88Z.0057.B0C.1007261552</string> <key>SMboardproduct</key> <string>Mac-F22589C8</string> <key>SMfamily</key> <string>MacBook Pro</string> <key>SMmanufacturer</key> <string>Apple Inc.</string> <key>SMproductname</key> <string>MacBookPro6,1</string> <key>SMserial</key> <string>C02FW214DC79</string> <key>SMsystemversion</key> <string>1.0</string> </dict> </plist>
  2. Hey all, I've got a pretty sweet install running on an Acer Aspire 5742. As far as I can tell, everything works except the Wifi-card (which will be replaced shortly), the microphone (which i can do without) and waking from sleep. This bothers me the most. When I put the laptop to sleep, it powers down nicely. However, when I wake it up, the display seems to hang. I can see the login screen, I can even use the mouse pointer, however the text cursor doesn't blink. Typing doesn't work either, so I can't use the OS. Looking through the logs it says: Jul 14 21:55:02 localhost kernel[0]: Wake reason: PWRB (User) Jul 14 21:55:02 localhost kernel[0]: RTC: PowerByCalendarDate setting ignored Jul 14 21:55:02 localhost kernel[0]: No interval found for . Using 8000000 Jul 14 21:55:02 localhost kernel[0]: BCM5722D (setPowerState:84): Changing power state from 0 to 1 Jul 14 21:55:02 localhost kernel[0]: BCM5722D (resetAdapter:145): 4B657654 to B49A89AB in 0 iterations Jul 14 21:55:02 localhost kernel[0]: BCM5722D (setMedium:364): Change medium: kIOMediumEthernetAuto Jul 14 21:55:02 localhost kernel[0]: BCM5722D (setMedium:389): Change medium: kLinkDuplexNegotiate Jul 14 21:55:02 localhost kernel[0]: BCM5722D (configureLinkAdvertisement:562): advertiseFe: 5E1 Jul 14 21:55:02 localhost kernel[0]: BCM5722D (configureLinkAdvertisement:563): advertiseGe: 300 Jul 14 21:55:02 localhost kernel[0]: BCM5722D (startAutoNegotiation:585): Adv reg: 5E1 Jul 14 21:55:02 localhost kernel[0]: considerRebuildOfPrelinkedKernel prebuild rebuild has expired Jul 14 21:55:02 localhost kernel[0]: USBMSC Identifier (non-unique): 20090516388200000 0xbda 0x138 0x3882 Jul 14 21:55:07 localhost kernel[0]: stampWait: Overflowed checking for stamp 0x13e5d on MAIN ring: called from Jul 14 21:55:07 localhost kernel[0]: timestamp = 0x13e5c Jul 14 21:55:07 localhost kernel[0]: **** Debug info for apparent hang in MAIN graphics engine **** Jul 14 21:55:07 localhost kernel[0]: ring head = 0x00000038, wrap count = 0x 0 Jul 14 21:55:07 localhost kernel[0]: ring tail = 0x00000d60 ring control = 0x00003001 enabled, auto report disabled, not waiting, semaphore not waiting, length = 0x004 4KB pages This seems to me like a graphics card problem, that's why I posted it in here. Some extra information: I'm using 10.8.4, on a system with the following lspci: $ lspci -nn pcilib: 0000:00:02.0 64-bit device address ignored. 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43225 802.11b/g/n [14e4:4357] (rev 01) ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02) ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02) ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02) ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02) ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
  3. [GUIDE] 1st Generation Intel HD Graphics QE/CI

    Hey Oscarb, Try and update to the latest version of Chameleon, then use GraphicsEnables=Yes . Worked for me on an Acer Aspire 5742 PS also make sure your smbios.plist is set up to fake a Macbook 6,1 configuration.
  4. [GUIDE] 1st Generation Intel HD Graphics QE/CI

    This is awesome. I would like to make a note that you should update to the latest Chameleon before trying this. I tried about 10 AppleIntelHDGraphicsFB.kext files, with very limited success. At some point, even my vnc was distorted with lines all over the place. But, after updating chameleon, selecting the 6,1 Macbook Pro SMBIOS, and removing Natit.kext, I've got native resolution (with QE/CI i think ) on my Acer Aspire 5752, running 10.8.4 Just for reference: I installed ML with myHack, updated to 10.8.4, removed the AppleIntelHDGraphics* kexts from single user (after the update it wouldn't show desktop anymore), updated Chameleon with Chameleon Wizard (4.2.2 i think), installing Chameleon v2.2svn r2251 then I followed this guide
  5. It works for me too! Awesome! The fps on for example chess isn't high, but my native resolution works. Can't get the VGA or HDMI ports to work decently yet, but this is a huge step forward! Thanks so much! EDIT: My monitor seems to get screwed up when sleeping (or when waking of from sleep).
  6. HD 4530 Issue

    Yeah, me too. Seems to me that we have a way to get QE/CI on Snow, but the framebuffer is lacking. In other words, we're unable to connect the monitor. Maybe somebody who has more knowledge of the than me, can combine these two (the kext which has the framebuffer if I'm not mistaking, and the GPU chip kext)
  7. HD 4530 Issue

    You could try to delete the ATI kexts. If that doesn't help, we'll start looking some more EtHeO out...
  8. HD 4530 Issue

    Hey man, Have you tried removing all ATI kexts? That should get you an initial image. With the RadeonHD.kext in place you might even be able to select the resolution in the display preference panel EtHeO out...
  9. HD 4530 Issue

    Ebony, Remove the AtiRadeonX1000.kext as well. Somehow, it has priority over RadeonHD.kext. EtHeO out...
  10. HD 4530 Issue

    No problem I installed iAtkos v7 on my laptop (hp dv6 1230ed) which automatically installed a 10.5.8 system. Then, after trying some tweaks and hacks, I found the kext I posted. It should work when Natit and other injectors are not present, and will NOT work when they are. I tried inserting my monitor data (can't recall the technical term) without testing the kext without that data, but it failed. Then, I reverted to the original kext and Presto! it worked. The resolution was a grand 1366x768 I've been thinking about trying netkas' new driver (http://netkas.org/?p=284) but that has too big of a screw-up possibility for me. Gonna try it with a totally fresh install. Whenever I can find the time... EtHeO out...
  11. HD 4530 Issue

    Hey justry, I'm running 10.5.8. I've got no idea whether it would work on 10.5.2. You could just try it, and if it would boot, just remove the kext again. Make sure to fix the permissions on the kext though EtHeO
  12. HD 4530 Issue

    Hey bboyg, I've got the same card as you do (the 4530). Apparently, we can forget about native CI/QE support. However, I did get the native resolution (which is 1366x768) to work. I used "RadeonHD.kext". Important note is: you have to disable the Natit.kext by either removing it or renaming it to a non-kext extension. Hope this works for you. If not, don't hesitate to ask EtHeO RadeonHD.kext.zip
  13. How I fixed my x1300 (AGP) blue screen and pointer problem

    Works for me! Did take a bit of time to respond though, but maybe that's just the crappy performance I've been getting. Anyway, no more crappy mouse trailing artifacts!
×