Jump to content
InsanelyMac Forum

tc11228

Members
  • Content count

    14
  • Joined

  • Last visited

About tc11228

  • Rank
    InsanelyMac Protégé
  1. Fine Tuning Help Thank you very much for the GREAT guide. I am now running 10.5.8 on my Dell 610. I have an ATI card and 2200 Intel card. My system is configured for an 9500 since I get mouse tears with the X300 driver. I have not been successful at getting the following items to work: 1. Sleep - I reinstalled the drivers following the original instruction. With hibernation on, I get a dark screen that requires a reboot. With sleep only, my screen stays on. When I hit the POWER button, it gives me an option to Shutdown, Sleep, and Cancel. I hit cancel and system functions normally. 2) Wireless - tried several method without luck. I am using and external USB card. 3) Ethernet - did not work. I turned it off in the bios. Strangely, the Apple USB Ethernet adapter does not work either. HELP. Tom
  2. tc11228

    Lenovo ThinkPad X61 Tablet

    Bluetooth Dongle Issue I recently purchased a Bluetooth dongle since my X61 does not have Bluetooth. My machine recognizes the dongle. It shows in the Networking preference panel and in task bar. Setup Bluetooth Device run but it does not discover my Logitech V470 mouse or Mighty Mouse. Also, it cannot connect to any of the devices. Any help would be appreciated.
  3. tc11228

    Lenovo ThinkPad X61 Tablet

    Oz, I have been working with Scott on getting my tablet to work. I have confirmed that TM mistakenly recognizes my Tablet as a WACF004 (in the Console). I believe you said you created a custom pkg. Is it possible to send me one for a 008. Thanks, Tom
  4. tc11228

    TabletMagic for TabletPCs

    Scott, I attached information from the console and ioreg. Thank you for the help. Tom Tom_X61_Archive.zip
  5. tc11228

    TabletMagic for TabletPCs

    Scott, The last message was a little above my newbie head. I did not receive any errors in Console. I am getting a bunch of messages about from Onyx (smithmicro). 10/16/09 5:17:04 PM System Preferences[2018] Received [model] ISD V4.0 (TabletPC)10/16/09 5:17:04 PM [0x0-0x31031].com.apple.systempreferences 2009-10-16 17:17:04.209 System Preferences[2018:903] Received [model] ISD V4.0 (TabletPC) 10/16/09 5:17:04 PM Preferences[2018] Received [scale] 24570 18430 [0x0-0x31031].com.apple.systempreferences 2009-10-16 17:17:04.225 System Preferences[2018:903] Received [scale] 24570 1843010/16/09 5:17:04 PM System I did not get any terminal output with the ioreg command as typed. I wish I could be more help. Tom
  6. tc11228

    TabletMagic for TabletPCs

    Scott, I am using and X61 tablet. I have an WACF008 which worked on 10.5.6 and 10.5.8. It has never worked on SL. Oz mentioned that TM was improperly recognizing his WACF004 as an 008. I seem to be having the opposite issue. It seems to recognize my digitizer as a WACF004. I say that for two reasons: 1) the digitizer does not work if I remove WACF004 from the kext file and 2) if ALWAYS drops the resolution to 19200 (I terminate the daemon and change it to 38400 but it is reset). I do not see any data in the testing tab. I hope this give you enough information to go on. Tom
  7. tc11228

    Lenovo ThinkPad X61 Tablet

    My tablet never worked in SL. It worked fine in L10.5.8. I am using TMb17d1. I tried multiple ways to edit the kext. I used your kext file, I tried Enable Digitizer in TM. I am using your Tablet Enabler kext. No data is being streamed. It reads 0000. I killed the daemon, and set the baud to 38400, it is reset to 19200 when I hit ENABLE. If I remove WACF004 from the kext, TM does not recognize the tablet. It seems like the reverse of what the problem you were having. TM is recognizing my WACF004 as a WACF008.
  8. tc11228

    TabletMagic for TabletPCs

    Scott, I am having a weird issue with my multitouch tablet since upgrading to SL. I am usingTablet Enabler 1.1 and TM b17d1. I used TM's Enable Digitizer button to make the necessary kext changes. TM finds serial0 and I sees ISD V4.0 in the TM panel. When I set the baud rate to 38400, TM changes it back to 19200. I believe my tablet is being recognized as a WACF004. If I remove this line from kext, TM does not find the tablet. Once I replace it, the tablet is recognized again. I'd appreciate any help you can provide. Tom
  9. tc11228

    Lenovo ThinkPad X61 Tablet

    OutZider, Some additional facts: If I remove the WACF004 line in my serial kext, the serial0 ports is NOT recognized. Once I replace it, it is recognized again. TabletMagic changes my baud from 38400to 19200 when it finds the Tablet. Tom
  10. tc11228

    Lenovo ThinkPad X61 Tablet

    outZider, Long time, you help me get everything going on 10.5.6. I have WACF008. Let me try and change the baud rate. Also, I am removing fakesmc and replacing it with dsmos as you suggested in a previous thread. As always, thanks for the help. Tom
  11. tc11228

    Lenovo ThinkPad X61 Tablet

    My X61 Tablet is working remarkably under SL. My tablet is not working. I have: 1) installed TablerEnabler, 2) made the change to the necessary file and 3) installed TabletMagic. My system recognizes the tablet. I see serial0. However, the tablet does not work. Any suggestions?
  12. tc11228

    iATKos v5i - IBM/Lenovo x61 tablet

    UPDATE: Working GMA3100 on Lenovo x61t on 10.5.7 I tried several items over time. They likely all contributed to the success. 1) Installed iDeneb 10.5.6 2) Update using Software Updates to 10.5.7 3) Installed Alternate Sleep Trick 4) Install SaCleoCheater's files from Pegasus’ post http://www.mediafire.com/?sharekey=2833574...04e75f6e8ebb871 5) Removed 3100 files from twinotter post: * rm -rf /System/Library/Extensions/AppleIntelGMA* * rm -rf /System/Library/Extensions/AppleIntelIntegrated* * rm -f /System/Library/Extensions.mkext * reboot I will update the post if I can pinpoint the exact steps necessary. Thank you all! T
  13. tc11228

    iATKos v5i - IBM/Lenovo x61 tablet

    Pegasus, Thank you very much for the file. It installed like a charm. Unfortunately, I booted to the blue and white screen immediately after installation. I am running iDeneb 10.5.7 (upgraded via mac updates). Prior to reading your post, I change my resolution to 800x600 as a test. I experienced the same blue and white screen. Unfortunately, I have not been able to book outside of safe mode since. I appreciate any help that you or anyone can provide. I have a Lenovo X61t. Everything else I need is working fine accept for the 3100, bluetooh, and wireless (just purchased the card). I have not tried an external monitor or speakers. Thank you! T
  14. tc11228

    Lenovo ThinkPad X61 Tablet

    I have an Intel Wireless Card inside my machine. Has anyone gotten this to work or do I need to purchase a new card?
×