Jump to content


  • Content count

  • Joined

  • Last visited

About carlnunes

  • Rank
    InsanelyMac Protégé
  1. Lenovo Thinkpad X131E Specs: • Intel Core i3-3227U (1.90GHz) • 12GB Memory (4GBx8GB) • 240GB SSD • Intel HD Graphics 4000 Ivybridge Mobile • Intel HM77 Chipset • Edimax USB WiFi • Trendnet USB Bluetooth Create USB INSTALLER with Clover OS X El Capitan-V7.app Use Clover_v2.3k_r3726.pkg to install EFI partition to USB INSTALLER or the System HD the same way for both. Install Clover to USB/System HD: Custom Settings: - Install for UEFI Booting Only - Install Clover in the ESP - Themes - BootCamp - Drivers64UEFI - OsxAptioFixDrv-64 - Install RC scripts on target volume Copy DSDT.aml, SSDT.aml to /INSTALLER/EFI/CLOVER/ACPI/patched Add Kext to EFI/CLOVER/Kext/10.11/ - ACPIBatteryManager.kext - FakeSMC.kext (RehabMan-FakeSMC-2016-0908) - GenericUSBXHCI.kext - NullCPUPowerManagement.kext - RealtekRTL8111.kext - VoodooHDA.kext - VoodooPS2Controller_X1Carbon.kext Add DSDT to EFI/CLOVER/ACPI/Patched/DSDT.aml - MaciASL.app > Preferences > Sources: - https://raw.github.com/RehabMan/Laptop-DSDT-Patch/master - [bat] Lenovo T430u Add unedited SSDT.aml to EFI/CLOVER/ACPI/Patched - SSDT-1.aml - SSDT-2.aml Edit/Add config.plist to EFI/CLOVER/ - Graphics config edits - config-hdmi_hd4000_.plist Add boot option to BIOS \EFI\BOOT\BOOTX64.efi Boot to System HD using Clover boot menu NOTES: AUDIO: HM77 - VoodooHDA.kext-289 ETHERNET: - RealtekRTL8111.kext WIFI: - Edimax USB EW-7811Un_Mac_driver_v1.0.1.4.zip BLUETOOTH: - Trendnet USB TRACKPAD/TRACKPOINT: - VoodooPS2Controller_X1Carbon.kext DSDT and SSDT: Note: The 'x' SSDTs from a Clover dump and likewise the SSDTs in the dynamic subdirectory from a Linux dump are loaded dynamically and are never included in ACPI/patched (they are SSDTs loaded on-demand with ACPI Load from SystemMemory). sudo cp -R /sys/firmware/acpi/tables DEST VIDEO: - Clover config edits
  2. Specs: • Intel Core i3 3217U (1.80GHz) • 4GB Memory(non-upgradeable) • 240GB SSD • Intel HD Graphics 4000 • Intel HM76 Chipset • Intel HD Audio • Azurewave AW-CE123H 802.11ac/nbg WiFi+BT PCI Express Module Broadcom BCM4352 / Bluetooth 4.0+3.0 HS Class II • Multiformat DVDRW/CD-RW drive Install Yosemite to the entire drive; http://www.insanelym...352hmb-install/ Create Ubuntu 14.04.2 installation USB Next I shrank the partition in Yosemite > Disk Utility Booted to Ubuntu 14.04.2 installation USB by setting BIOS boot option to "EFI: SanDiskxxxxxx" and not "SanDiskxxxxxxx". To confirm you are in Ubuntu EFI Installation mode. Install Ubuntu by choosing the "Something Else" option Create your Ubuntu install partition in the free space area; leaving 4GB for the Swap area we'll create next Create your Ubuntu Swap area partiton in the remaining free space Choose your Mac EFI partition for the Ubuntu Boot Loader Install Ubuntu and reboot into BIOS Ubuntu 14.04.2 EFI Mode Installer will add a boot option to your BIOS called "Ubuntu" Now you can choose either OS, from the BIOS, when booting. Clover will also boot to Ubuntu EFI; Choose the Ubuntu icon while booting Clover.
  3. Specs: • Intel Core i3 3217U (1.80GHz) • 4GB Memory (*non-upgradeable) • 240GB SSD • Intel HD Graphics 4000 • Intel HM76 Chipset • Intel HD Audio • Azurewave AW-CE123H 802.11ac/nbg WiFi+BT PCI Express Module Broadcom BCM4352 / Bluetooth 4.0+3.0 HS Class II • Multiformat DVDRW/CD-RW drive First thing I did was create a recovery USB for Windows 8; because this laptop didn't come with install media. I formatted the USB drive to FAT-32 so Windows 8 divided the recovery image into smaller file sizes; formatting the USB to NTFS will avoid this issue. Then I installed Yosemite to the entire drive; http://www.insanelymac.com/forum/topic/304255-carls-asus-x551ca-si30403x-yosemite-1010-clover-w-bcm94352hmb-install/ Next I shrank the partition in Yosemite > Disk Utility Restarted, set BIOS to USB and booted to Windows 8 Recovery USB then entered Command Prompt Create Partitions for Windows in free space: diskpart select disk 0 select partition 4 create partition primary size=1000 format quick fs=ntfs label="Windows RE tools" assign letter="T" set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac" gpt attributes=0x8000000000000001 create partition efi size=260 format quick fs=fat32 label="System" assign letter="S" create partition msr size=128 create partition primary shrink minimum=20480 format quick fs=ntfs label="Windows" assign letter="W" create partition primary format quick fs=ntfs label="Recovery image" assign letter="R" set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac" gpt attributes=0x8000000000000001 Apply Image to your Windows partition: md R:\RecoveryImage xcopy D:\sources\*.swm R:\RecoveryImage\ dism /Apply-Image /ImageFile:R:\RecoveryImage\install.swm /SWMFile:R:\RecoveryImage\install*.swm /Index:1 /ApplyDir:W:\ md T:\Recovery\WindowsRE xcopy /h W:\Windows\System32\Recovery\Winre.wim T:\Recovery\WindowsRE\ diskpart sel disk 0 list vol sel vol 3 assign letter=v: cd /d v:\EFI\Boot\ bootrec /fixboot bcdboot c:\Windows /l en-us /s v: /f ALL W:\Windows\System32\reagentc /setreimage /path T:\Recovery\WindowsRE /target W:\Windows W:\Windows\System32\reagentc /setosimage /path R:\RecoveryImage /target W:\Windows /index 1 Remove USB and Exit Command Prompt and Shut Down the computer Start computer, enter BIOS, set Windows Boot Manager as the first boot option Boot computer and complete the Windows 8 installation, without the Recovery USB, including the System prep tool; click okay and reboot When you want to boot into OS X, reboot into the BIOS and choose Mac OS X as your first boot option TROUBLESHOOTING: Windows 8 won't boot using EFI BIOS Boot option; need to repair EFI partition: I reinstalled Clover to do some DSDT edits and Windows 8 wouldn't boot. The System / EFI partition Windows 8 uses was empty. The bcdboot command will copy boot files and create a boot option in your EFI BIOS. Boot to Windows 8 Recovery USB > Command Prompt: diskpart select disk 0 list vol select vol 4(or whatever your EFI / System volume label) assign letter=s: exit (exit diskpart) bcdboot C:\Windows /l en-gb /s s: /f ALL
  4. CONTACT ME THROUGH THE FORUM IF YOU HAVE QUESTIONS My ASUS X551CA-SI30403X Yosemite 10.10 Clover Vanilla Install using a BCM94352HMB Specs: • Intel Core i3 3217U (1.80GHz) • 4GB Memory (*non-upgradeable) • 500GB HDD 5400RPM • Intel HD Graphics 4000 • Intel HM76 Chipset • Intel HD Audio • Azurewave AW-CE123H 802.11ac/nbg WiFi+BT PCI Express Module Broadcom BCM4352 / Bluetooth 4.0+3.0 HS Class II • Multiformat DVDRW/CD-RW drive Download Yosemite 10.10 from Apple App Store Create USB with OSX_Yosemite_Chameleon.app Add Kext to Extra/Extensions folder - FakeSMC - GenericUSBXHCI - ApplePS2ElanTouchpad.kext - AsusNBFnKeys.kext - NullCPUPowerManagement Set BIOS to boot from USB Boot -V to the installer and install Yosemite Create the EFI partition for Clover; Open Terminal: sudo -s *password newfs_msdos -v EFI /dev/diskXsX mkdir /Volumes/EFI mount_msdos /dev/diskXsX /Volumes/EFI Install Clover to System HD: Clover_v2.3k_r3193.pkg Custom Settings: - Install for UEFI Booting Only - Install Clover in the ESP - Themes - BootCamp - Drivers64UEFI - OsxAptioFix2Drv-64 - Install RC scripts on target volume Add Kext to EFI/CLOVER/Kext/10.10/ - ACPIBatteryManager.kext - ApplePS2ElanTouchpad.kext - AsusNBFnKeys.kext - BrcmPatchRAM.kext - FakeSMC.kext - GenericUSBXHCI.kext - RealtekRTL8100.kext - VoodooHDA.kext Add DSDT to EFI/CLOVER/ACPI/Patched/DSDT.aml - MaciASL.app > Preferences > Sources: - https://raw.github.com/toleda/audio_hdmi_hd4000/master - https://raw.github.com/RehabMan/Laptop-DSDT-Patch/master - AMI-HD4000-Laptop-FB-03-A1 - [bat] ASUS G75VW - [igpu] Brightness fix (Brightness fix graphics_PNLF.txt) - Comment out HDEF section - Compile Error: remove slash Add SSDT.aml to EFI/CLOVER/ACPI/Patched - Create with Hackintosh Vietnam Tool.pkg - Clover config > CPU > IvyBridge Mobile - Clover config > SSDT > Generate - Tools > SSDT Generator(*ssdt.aml with be created in /Extra/) Edit/Add config.plist to EFI/CLOVER/ - Graphics config edits - config-hdmi_hd4000_.plist - WiFi config edits - config-bcm94352-100.plist - SSDT config edits - http://clover-wiki.zetam.org/Configuration/ACPI#SSDT Finish installing Clover by unmounting the EFI partition: diskutil unmountDisk force /dev/diskXsX Add boot option to BIOS - \EFI\BOOT\BOOTX64.efi Boot to System HD using Clover boot menu INSTALL NOTES: Audio: * I now use the edited VoodooHDA.kext and comment out HDEF device in DSDT.aml only. - VoodooHDA-v2.8.7.pkg - Restart, hold Microphone hole in monitor while booting to muffle the feedback - Pref Pane settings VooDoo iGain 0, iMix 90 - Edit VoodooHDA.kext Contents/ … plist set iGain 0. - VoodooHdaSettingsLoader.app to login items VoodooHDA v2.8.7 installation notes: - AppleHDADisabler.kext will install to S/L/E - Backup AppleHDA.kext then remove from S/L/E - VoodooHDA.prefPane S/L/PreferencePane - VoodooHdaSettingsLoader.app to Applications Video - Clover config edits - DSDT Edits above WiFi - BCM94352HMB - BrcmPatchRAM.kext - config-bcm94352-100.plist * Adjust touchpad speed setting to get two finger scroll to work. CONTACT ME THROUGH THE FORUM IF YOU HAVE QUESTIONS
  5. Here's my account with installing 10.9.2 on GIGABYTE GA-EP45-UD3L with Radeon 5450. SPECS - Intel Core 2 Duo E8400 Wolfdale 3.0GHz - 4GB DDR2 1066 - GIGABYTE GA-EP45-UD3L BIOS: F9 - SATA HDD - Mavericks 10.9 App Store Download INSTALL - Chameleon-2.2svn-r2377.pkg - http://www.insanelymac.com/forum/topic/289062-109-mavericks-simple-vanilla-hackintosh-install-guide/ - Install settings - Unlike the referenced guide; Format your USB; Options > Master Boot Record - BIOS settings - Mac OS will reset your BIOS and you'll have to enter the correct settings for each boot; until you install Chameleon - RTC Patch for Mavericks 10.9: - perl -pi -e 's|\x41\x89\xd7\x41\x89\xf4|\xe9\xb8\x00\x00\x00\x90|;' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC - Set boot priority to your USB - Boot settings - "-v -x -f" - Google Drive Hackintosh Share (carls-gaep45ud3l-Extra-Installs.zip) - Software Update to 10.9.2 - Audio - ##### ALC888 Legacy 100202 Restore from Time Machine backup - Boot from USB into OS X Installer > Utilities > Restore System from Backup... - Reboot your system and boot to the USB stick again but this time select your OS X install. Use -v -x -f 
 - Install chameleon to your OS X drive - RTC Patch for Mavericks 10.9: - perl -pi -e 's|\x41\x89\xd7\x41\x89\xf4|\xe9\xb8\x00\x00\x00\x90|;' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC - Reboot and set BIOS to boot from HDD; remove USB; boot without options
  6. [SOLD]

  7. VoodooPower 1.2.3

    Dude everytime I go to your download link, it loads an Ad. Are you offering a download or exploiting traffic? Please post a clear link to the download.
  8. I like the speed stepping for temps. I want to know my machine is throttling and not going full blast all the time. Probably one of the coolest edits so far too! It's tech; but worth the effort. I didn't have instant notification enabled; but now I do. Sorry I couldn't respond sooner.
  9. RESOLVED//Gigabyte GA-EP45-UD3L and ALC888

    Yes, I have very nice sound with GA-EP45-UD3L (alc888) no pop/crack sound either! A quote from here: http://www.insanelymac.com/forum/index.php?showtopic=202041 Have not tried to configure 5.1 surround; as I have not found a comprehensive guide.
  10. Here's my account with installing 10.6 on GA-EP45-UD3L. SPECS - Intel Core 2 Duo E8400 Wolfdale 3.0GHz - G.SKILL 4GB (2 x 2GB) DDR2 1066 - GIGABYTE GA-EP45-UD3L (BIOS F7) - Sony DVD+R SATA - Seagate 320GB SATA 7200RPM - Snow Leopard 10.6 Retail DVD force 32bit INSTALL - Bios settings config(because SL will reset it) - Boot with custom SL boot CD(iso found at above link to GA-EP45 thread), type arch=i386(for 32bit) - Swap for retail SL DVD, and press F5(may read error while drive initiates) - Install SL(may read Failed! at end; this is okay) - Reboot, swap DVD for CD and configure the Bios settings before OS starts; type arch=i386 - Once in SL, Install bootloader PCEFI 10.5 w/ Chameleon V2.0 Rc3r658 - Copy Kext and Extension folder to Extra folder - Copy your custom dsdt.aml to /Extra/asdt.aml(lowercase) - Copy your custom com.apple.boot.plist and smbios.plist to /Extra/ - Now reboot without CD - Update via standalone 10.6.1, don't reboot until your custom files are in place - Make any additional edits to your custom files before reboot - Now reboot into 10.6.1 - Update via standalone 10.6.2, don't reboot until your custom files are in place - Delete dsmos.kext and copy over fakesmc.kext to /Extra/Extensions/ and make any additional edits to your custom files before reboot - Now reboot into SL 10.6.2 Custom Files Kext: - Use the Install Guide Support Files from the first link. - Run Kext Utility every time you mess with kext or the folders for the kext - I deleted jmicronATA.kext from System/Library/Extensions; because I don't use IDE com.apple.Boot.plist: - <key>Kernel</key><string>mach_kernel</string> - <key>Kernel Flags</key><string>rd=disk0s2</string> - <key>USBBusFix</key><string>Yes</string> - <key>arch</key><string>i386</string> smbios.plist: - Lizard will make this easy. - Check your version of Chameleon and the available options Audio ALC888: - dsdt.aml edit with iaslMe; added HDEF code; see link below for details - LegacyHDA.kext from 4 out 2 in HDA series - Finally no pop / crack sound while adjusting audio. Graphics 4890 reference: - EVOenabler.kext.zip, ATI4800Controller.kext.zip, ATIRadeonX2000.kext.zip found here: - Dual monitors - nope. SpeedStepping: - Yes, via dsdt.aml edits; see FormerlyKnownAs' original thread here. Apple Software Update - Successfully ran Apple Software Update in 10.6.2 with no known problems Run Time 12/28/09: - All running very well; with reasonable temps. 01/24/10: - Software Update went smooth; with latest security releases. 03-21-10 - Everything is running smooth; rock solid. 10.6.3 Kernel Update - Backup AppleHDA.kext(10.6.2 version) from /S/L/E - Remove SleepEnabler.kext from /Extra/Extensions - Install update, don't restart - Replace NullCPUPowerManangment.kext with new one in from /Extra/Extensions - Add new SleepEnabler.kext - Delete ATI4800Controller.kext from /Extra/Extensions - Reboot, -F if you have to ignore cache - Run Exotic pkg and fix for ATI card - Replace AppleHDA.kext(new 10.6.3 version) in /S/L/E with the backed up 10.6.2 version - Reboot, should have sound - I had to run kextcache -v 1 -m /Volumes/SystemHD/Extra/Extensions.mkext /Volumes/SystemHD/Extra/Extensions/ /Volumes/SystemHD/System/Library/Extensions/ and kextcache -v 1 -m /Volumes/SystemHD/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /Volumes/SystemHD/System/Library/Extensions/ Time Machine Restore - Boot using custom boot CD, then to SL DVD - Restore Time Machine backup - Boot into SL using custom boot CD - Reinstall PCEFI Bootloader * Little Snitch Rules have been reset but I can easily configure on the fly. Buy lil Snitch! Flash Bios to Delete DSDT.aml - Flashed to F9 first, then Flashed to custom 5UD3LWID.07m - Followed this Guide - no longer needed kext; sleepenabler.kext, openhaltrestart.kext - had to add VoodooPowerMini.kext for speedsteping, alot easier than editing an dsdt.aml - added IOAHCIBlockStorageInjector.kext to remove orange icons Kext and Permissions - run Kext Utility In Terminal: - kextcache -v 1 -m /Volumes/SystemHD/Extra/Extensions.mkext /Volumes/base/Extra/Extensions/ /Volumes/SystemHD/System/Library/Extensions/ - kextcache -v 1 -m /Volumes/SystemHD/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /Volumes/SystemHD/System/Library/Extensions/ - sudo diskutil repairPermissions / - Reboot 10.6.4 Update - 10.6.4 Combo Update - Netkas Exotic ATI pkg - KextUtility then the kextcache commands - Reboot - Replace AppleHDA.kext - KextUtility then the kextcache commands; again 10.6.5 Update - 10.6.5 Combo Update - Netkas Exotic ATI pkg - KextUtility then the kextcache commands - Reboot - Replace AppleHDA.kext - KextUtility then the kextcache commands; again 10.6.7 Update/Reinstall - Boot with custom boot CD and type "arch=i386"
  11. No Snow Leopard will not work with these kext; but this guide will show you how. http://www.insanelymac.com/forum/index.php?showtopic=181903 I'll be posting my experiences on installing Snow Leopard, on this board, soon.
  12. [Guide] GA-EP45-UD3 retail install guide!

    Awsome! Thank you so much for your contributions. I got a GA-EP45-UD3L and love it! Look at what I did!
  13. Carl's GA-EP45-UD3L E8400 Leopard 10.5.8 Retail Install NewEgg.com had the best price on everyone of these items. $471.40 total. - Intel Core 2 Duo E8400 Wolfdale 3.0GHz - Antec Sonata III 500 Case w/ Antec Earthwatts 500W PSU (Great case for $109; Very Quite!) - G.SKILL 4GB (2 x 2GB) DDR2 1066 w/ heat spreaders - GIGABYTE GA-EP45-UD3L (BIOS iSrc 1.07, one PCIe x16 2.0, no FireWire) - Sony DVD+R SATA I already had these parts: - ATI X1900XTX 512MB PCIe x16 - 2 x 250GB Apple SATA 7200RPM(system, time machine) - 1 Raptor 10,000RPM SATA (scratch) - Leopard 10.5.0 Retail > 10.5.8 via Software Update My Experience: Boot with 132 disk from the EP45-UD3.iso. - this is a special 132 disk preloaded with kext for my motherboard - Burn the EP45-UD3.iso to get your special EP45-UD3 disk. * http://www.insanelymac.com/forum/index.php?showtopic=162179 file: http://users.adam.com.au/rapsons/EP45-UD3 Pack rev2.0.zip Install OSX 10.5.0 Retail - switch disk at boot prompt - type letter and number of DVD drive(ie: fe) - Install OSX * The install WILL fail. Click restart and use your special 132 boot disk Install 10.5.8 combo update - Use Software Update freely * My first Hack with all Apple updates; allowing me use the iLife suite easier Install Needed Kext from EP45-UD3 Pack - Use UInstaller and run kext.sh after each install; then reboot * Also see install-kext.txt; from my download pack Install bootloader PCEFI v9 from UInstaller - reboot WITHOUT 132 boot disk! Install Audio, Graphics, and Memory kexts - http://carlnunes.com/carls-GA-EP45-UD3L-pack.zip (4.7MB) * Natit-ati-x1900xtx.kext for my ATI x1900xtx 512MB PCIe x16 * AppleSMBIOSEFI_28 kext for reading memory properly in System Profiler * ALC1200_1057_SLIM for basic audio(pop sound when initiating audio bug)
  14. is ga-ep45-ud3l fully compatible?

    This URL will include a guide with a pack to download. You need to burn the file in the pack named "EP45-UD3.iso". I also attached EP45-UD3.iso. http://www.insanelymac.com/forum/lofiversi...dex.php/t162179
  15. Dell Dimension 8400 P4 - 3.2ghz 4gb@533mhz - IDE Sony DVD RW DW-Q30A - SATA - WD 7200rpm 160GB (base system drive) - SATA - Apple 7200rpm 250GB (time machine drive) - SATA - WD Raptor 10000rpm 36gb (scratch disk) - ATI X1900XTX 512MB PCIe 2.0 X16 Install choices and why EFI? : Having a Pentium Family 6 processor means no code runs native; so I said the hell with it an opted for the iDeneb package. I'm really glad I did. Tips I simply booted from iDeneb DVD and installed to local SATA drive. *Always "Slow Roast" your DVD ISO's this will save you time; burn at 4x or 8x; and don't use your machine while it's burning. Resolved Since Last Version Network - Ethernet - DHCP was crippled and static IP was the work around SATA drives now recognized My previous post on iDeneb V1.3 iDenbe 10.5.6 X11 Audio - AC97Audio Chipset - ICHxFixed Kernel - Voodoo 9.5 (Voodoo 9.5 requires SeatBelt Fix, Version 9.7 claims to have addressed this issue.) Fix - SeatBelt Fix Network - Ethernet - AppleBC5751 NO VIDEO - I couldn't get this thing to boot with the included ATI x1900 patch Instead I added the kext post install, from before, and everything is lovely! Post Install Patching Thanks to the Hackintosh IRC ninjas for the refresher course on kexts and the sweet lil script for post kext installs. I have attached an archive of my files used to edit kext files and use "terminal commands to install kext" file. UPDATE: 6 weeks later; system is solid while multitasking PS, Coda, COD4, FireFox, Remote Desktop; all at the same time! carlsdell8400kext1056.zip