Jump to content
InsanelyMac Forum

loKEY

Members
  • Content count

    22
  • Joined

  • Last visited

About loKEY

  • Rank
    InsanelyMac Protégé
  1. not really a solution, but at least on my rig a cold shutdown and reboot is enough to bring it back. cmos reset wasn't necessary after all.
  2. same issue here also with Z77e-itx. LAN disappears on reboot and only cmos reset brings it back. Let me know if you figure out a fix.
  3. thanks for the heads up zenith. yeah my other intel usb 3 ports on the back of the board work fine with your kext. port 3 and 4 are are on a header to front of my case. i guess the header cable must damaged or the connector on the board itself. i never would have figured it out without you pointing out the errors as usb 2 and usb receivers work fine on the header. thanks zenith. good lookin out.
  4. ok, realized i had miezes usb multiplex patch in my dsdt. removed it and ran dump again. no real change in usb behavior, but it did get rid of xhci errors in kernal log. i'm attaching two dumps, both with 1.2.6d3. one is with a corsair flash drive, the other is with an asmedia HDD dock. the flash drive doesn't mount at all, but the hdd dock mounts and unmounts in an endless loop. tried 1.2.6d5 with and without the no streams flag. no change. 3rd dumps a charm? hope this helps. XHCDump Running USB 3 Dock .zip XHCDump USB 3 FLASH.zip
  5. there's a corsair survivor USB 3 there. I can try a dump with a USB 3 hdd dock later. will try the new revision also.
  6. whoops must be my dyslexia. XHCDump Running.zip
  7. me as well: https://www.dropbox.com/s/nj108qq3ka2desh/XHCDump%20Running.zip
  8. hi Zenith, removed the flag like you said but no change. the USB3 drive shows up in system info when i plug it in, but it doesn't mount. USB 2 drives will mount just fine on the intel USB 3 ports.
  9. any way to make this work for sandybridge on 7 series boards? my asmedia ports work (without sleep) but no go on intel ports. i get boot errors: 9/25/13 12:26:22.000 AM kernel[0]: USBF: 1.751 AppleUSBEHCI::CheckForSharedXHCIController timed out waiting for muxed XHCI controller 9/25/13 12:26:22.000 AM kernel[0]: USBF: 1.756 AppleUSBEHCI::CheckForSharedXHCIController timed out waiting for muxed XHCI controller 9/25/13 12:26:22.000 AM kernel[0]: USBF: 1.756 AppleUSBEHCI::CheckForSharedXHCIController error getting XHCI controller 9/25/13 12:26:22.000 AM kernel[0]: USBF: 1.756 AppleUSBEHCI::CheckForSharedXHCIController - unable to find the correct XHCI xhciBitmap(0x00000000) assertVal(0x00000001) 9/25/13 12:26:22.000 AM kernel[0]: USBF: 1.779 AppleUSBEHCI::CheckForSharedXHCIController error getting XHCI controller 9/25/13 12:26:22.000 AM kernel[0]: USBF: 1.786 AppleUSBEHCI::CheckForSharedXHCIController - unable to find the correct XHCI xhciBitmap(0x00000000) assertVal(0x00000001) i've attatched my xhcdumps. thanks. https://www.dropbox.com/s/wokx8uerlaad4hj/XHCDump.zip
  10. would someone mind posting the connecter output info for mountain lion gm (specifically for eulmur framebuffer)? I'm having issues on my install with the perl script locating otools (even with the ml Xcode gm).
  11. loKEY

    Samsung R Series Notebooks

    word, thanks bungo. it's going to take me awhile to go through your dsdt but its gotta be one of the best i've seen, especially with all the comments. i've got battery in 10.7 with a 10.6.8 appleacpiplatform, but i think that kext is causing problems so i'm trying to implement the 8 bit register fix. how stable is the r7 with this dsdt? and what's your geekbench if u don't mind me asking?
  12. Hi Zprood, i've tried a bunch and really just can't figure this out on my dsdt. i'd really appreciate it if you could take a look. it's a samsung laptop. thank you for your time and all the work you've done . dsdt.aml.zip
  13. any ideas for how to turn these 2 lines into 8 bit, cant get it to compile no matter what i try Store (_SB.PCI0.LPCB.H_EC.B1DF, _SB.BFCC) and If (LNotEqual (_SB.PCI0.LPCB.H_EC.B1DF, _SB.BFCC))
  14. don't want to be a bugger but i can get my dsdt to compile with the battery fixes, havn't seen any other battery sections that look similar, can someone take a look? dsdt.aml.zip
  15. loKEY

    Samsung R Series Notebooks

    Bungo, noticed you posted that u got your battery fixed for 10.7.x in Zprood's topic, would u mind posting your new dsdt so i can add the fix to my dsdt?i have a q430 but the dsdt's are very similar to the r series
×