Jump to content
InsanelyMac Forum

clemsyn

Members
  • Content count

    31
  • Joined

  • Last visited

About clemsyn

  • Rank
    InsanelyMac Protégé
  1. Update: I got this running on High OS sierra on 10.13.3. I had to modify tables to enable XCPM, P states and Cstates on i3-3227u. Here is the latest EFI Folder https://www.dropbox.com/s/vppvgynriqpbhoh/EFI10.13.zip?dl=0 Link to a better Trackpad controller. Just replace the old one with this version of EFI/Clover/kext/10.13 https://www.dropbox.com/s/gl7jjfh78kzdmou/VoodooPS2Controller.kextx131e.zip?dl=0
  2. I have an X131e EDU series that I finally got working with Sierra 10.12. The SMBIOS is a MacBook Air 5,2. Whats working: 1. Native PowerManagement (DSDT tweak) 2. All USB 2.0 and USB 3.0 (DSDT tweak) 3. Camera and Bluetooth (Wifi is not working due to Whitelist Bios, Im using a usbwifi because of this) 4. MiniPCI-E/Msata both working (I currently have an Msata for my main HD) 5. Sound (via VoodooHDA). 6. Sleep/Wake works great (DSDT tweak) 7. Keyboard and Trackpad (VoodooPS2Controller) - Sierra Trackpad Prefpane and needs to be replace with ElCapitan prefpane-hacked) 8. Shutdown - Wake ON Lan needs to be disabled in BIOS Here are my BIOS settings CONFIG 1. POWER a. SpeedStep- Enabled b. CPU PowerManagement- Enabled c. Intel RapidStart Technology - Disabled 2. USB a. USB UEFI-Enabled b. Always ON- Disabled c. USB 3.0-Enabled 3. CPU a. CPU Multi Processor - Enabled b. Intel Hyper Threading - Enabled 4. Serial ATA a. SATA Controller - AHCI SECURITY 1. Memory Protection a. Exceution Prevention- Enabled 2. Virtualization a. Intel Virtualization Technology- Enabled STARTUP a. UEFI/Legacy Boot [uEFI only} - CSM Support - Yes PROCEDURE 1. Install SIERRA 10.12 on USB 2. Install CLOVER on USB using EFI only installation 3. Copy the EFI folder to the USB EFI Folder 4. Install Sierra to your HD 5. After installing Sierra don't forget to install Clover to your HD and copy the EFI Folder to the HD EFI FOLDER https://www.dropbox.com/s/k8dma8911xiy9ew/X131e-i3.zip?dl=0
  3. Thanks a lot! I got my e1505 working great with stock kexts of gma950. My only issue now is the sleep. It will sleep but when it wakes up, just black. I know it is not related to just the display coz when I press the button to increase the volume, there is no sound. BTW, this is hibernatemode 0. If I use hibernatemode 1, then I get the error "Not enough space to restore image". Any advice would be appreciated. Thanks.
  4. My htc g1 is now detected as an iPod but does not sync with iTunes. Great job!
  5. Teateam, I updated to snow 10.6.2 and your kernel is working great on my d945gcfl2d mainboard. I can even go to 64 bit but my GMA950 won't let me change resolutions (stuck at 1024x768). I'm using DSDT.aml and 32 bit allows me to change resolution. Any ideas? Is there a way to patch AppleIntelIntegratedFramebuffer.kext to allow resolution change to 64 bit?
  6. clemsyn

    D945GCLF2 Snow Leopard

    I just installed 10.6.2 on my d945glcf2d using Hazard's Snow. My bootloader is PC 10.5+Chameleon. I used teateam's mach_kernel to enable Hyperthreading, IOATAFamily.kext fix for ATA drives, deleted AppleTyMCEDriver.kext. Everything is working great and I am using vanilla GMA950 kext (AppleGMA950.kext and AppleIntelIntegratedFramebuffer.kext vanilla were downloaded since Hazard's were older versions). I have Hardware acceleration and resolution change with 32bit but with 64bit, I only have hardware acceleration and no resolution change. Also, I am not using and DSDT.aml. Is the DSDT a must or is it OK not to have it? Also, is there any fix for resolution change on 64bit? Any assistance would be appreciated. Thanks.
  7. Wish I could upgrade to snow but not sure on what to use. I downloaded hazard's but I get errors so I'm sticking with 10.5.8. I would appreciate it if you can make hyperthreading for that kernel. Also a list of your kext on snow would be appreciated along with the settings. Thanks.
  8. Thanks for the reply. I have a d945gclf2 with Atom 330. With 10.5.8 (and 10.5.7) kernel, it only works with hyperthreading disabled or using cpus=3. A complete hyperthreading on 10.5.8 kernel would be great. Thanks.
  9. Hi, any chance you can make one for 10.5.8 kernel of you can send me instructions on how to do hex edit the mach_kernel and I'll try to do it. Thanks.
  10. clemsyn

    4965AGN(Wireless) kext

    The wireless card has no drivers for MAC at the moment but mercurysquad is working on one but might take awhile. Here is his website for the project http://projectcamphor.mercurysquad.com/
  11. clemsyn

    TSC sync XNU patch

    Thanks a lot. Working great on e1505 :rolleyes:
  12. clemsyn

    TSC sync XNU patch

    Pepere, Please check your PM. Been waiting to try your kernel. THanks.
  13. clemsyn

    TSC sync XNU patch

    PM sent...I'm very interested.
  14. clemsyn

    TSC sync XNU patch

    Can anyone give us a guide on how to patch the 10.5.7 kernel? Thanks
  15. clemsyn

    TSC sync XNU patch

    Please...kinda need it too
×