Jump to content

ijwcomp

Members
  • Content count

    17
  • Joined

  • Last visited

About ijwcomp

  • Rank
    InsanelyMac Protégé
  1. Haswell Speedstep Problem

    I've tried with <key>SSDT</key> <dict> <key>DropOem</key> <false/> and nothing in my ACPI folder. Also <key>SSDT</key> <dict> <key>DropOem</key> <true/> with a SSDT.aml in the ACPI/patched folder. (attached) I've generated the SSDT with ssdtPRGen.sh. Both have no difference. Edit: (More information) Using the SSDT generated by ssdtPRGen.sh sudo dmesg | grep XCPM returns XCPM: registered IOPPF: XPCM mode Verbose Boot Log: http://pastebin.com/Txier9tU cat /var/log/system.log | grep "AICPUPMI:" returns: Dec 15 22:27:22 localhost kernel[0]: AICPUPMI: CPU P-States [ 8 35 ] HWMonitor says 800MHz, but after 1s, changes to 3.5GHz. SSDT section of Clover's config.plist says: <key>SSDT</key> <dict> <key>DropOem</key> <true/> <key>Generate</key> <dict> <key>CStates</key> <false/> <key>PStates</key> <false/> </dict> <key>MinMultiplier</key> <integer>7</integer> <key>PLimitDict</key> <integer>0</integer> </dict> AppleIntelCPUPowerManagement.kext does not seem to load. (see screenshot attached) SSDT.zip
  2. Hi, I have a problem with my Speedstep not working on my rig as follows: ASUS Gryphon Z87 Intel i3 4330 3.5GHz 16GB RAM 1333MHz SSD, 3xHDD HWMonitor reports 3.5GHz. I use Clover, config.plist attached (as a txt). cat /var/log/system.log | grep "AICPUPMI:" returns: Dec 15 22:27:22 localhost kernel[0]: AICPUPMI: CPU P-States [ 8 35 ] Sleep works fine. Thanks, config.txt
  3. Help with DSDT (Orange Drives)

    Thanks guys! Was missing "compatible", "IOName" and "name" from my DSDT.
  4. Help with DSDT (Orange Drives)

    Hi, I've got a problem with drives seen as internal only if I use the -f boot flag. Without it, I get orange drives. IOAHCIBlockStorageInjector.kext works but if it can be done in the DSDT, I'd prefer that. Attached are my DSDT (original extracted with Ubuntu, one that compiles, and the one I patched various things for). I used this under Device(SATA), which works only when I use -f: Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x81, 0x26, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Thanks, dsdt.zip
  5. Hi all, I'm trying to get sleep to work properly on my Gigabyte H55N-USB3 motherboard with an Intel i3 540 on Mavericks. At the moment, when I tell it to go to sleep, it blacks out the screen except you can see the mouse pointer still (display does not turn off). Keyboard, mouse, power led, fans are all on. Mouse does not respond to movements but clicking/pressing the power button/pressing a key on the keyboard 'wakes' it up to the password prompt. I'm using a custom DSDT and SSDT and speedstep is working (it clocks my processor down to 1.2GHz from 3.06GHz when idle). I have attached my pmset -g assertions Assertion status system-wide: BackgroundTask 0 PreventDiskIdle 0 ApplePushServiceTask 0 UserIsActive 0 PreventUserIdleDisplaySleep 0 InteractivePushServiceTask 0 PreventSystemSleep 0 ExternalMedia 0 PreventUserIdleSystemSleep 1 NetworkClientActive 0 Listed by owning process: pid 1370(AddressBookSour): [0x00000001000001c4] 00:00:13 PreventUserIdleSystemSleep named: "Address Book Source Sync" Timeout will fire in 1787 secs Action=TimeoutActionTurnOff Kernel Assertions: 0x100=MAGICWAKE id=500 level=255 0x100=MAGICWAKE mod=1/01/70 12:00 pm description=en0 owner=en0 Thanks in advance.
  6. Yea, tried both USB3 and USB2 ports. I tried about like 20-30 different copies of IOUSBFamily.kext and IOUSBMassStorage kexts and one finally worked!
  7. OSX Mavericks I tried using both a PS/2 keyboard and USB.
  8. Just tried it, with -v -f and -v -f npci=0x2000 Made no difference.
  9. I've deleted the kexts that have AMD*, NVDA* The rest don't exist. IntelHD* has been deleted before. And also removed all the kexts in the Extra/Extensions folder except for FakeSMC, NullCPUPowerManagement Both -v -f -x and -f -v -x npci=0x2000 boots up into the installer, but keyboard and mouse still don't work.
  10. Hi, I'm having problems getting my USB keyboard and mouse to work in setup. Keyboard and mouse work until it goes into Darwin I have tried using legacy and non-legacy USB in the BIOS. Both USB2 and USB3 ports don't work. Also used USBBusFix=Yes and No. Specs: Gigabyte H55N-USB3 Intel Core i3 540 (with Integrated Graphics) 8GB RAM I used myHack to create the installer, and used the guide below for the integrated graphics. http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/ Integrated graphics: sudo intel_reg_dumper shows that PCH_LVDS is disabled, hence I went for only Core Image. Deleted everything with AppleIntelHDGraphics from System/Library/Extensions Added AppleIntelHDGraphics.kext, AppleIntelHDGraphicsGLDriver.bundle, AppleIntelHDGraphicsVADriver.bundle to the Extra/Extensions folder BIOS Settings: AHCI on Legacy USB on (tried it off as well) HPET 64bit Chameleon Settings: Used the -v -f bootflags Kernel: mach_kernel Ethernet Built In (both on/off) Restart Fix USB Bus Fix (both on/off) Graphics Enabler (both on/off) Graphics Mode (1024x768x32) PCIRoot=1 (0 works, 1 does not) Extra/Extensions folder: AppleIntelHDGraphics.kext, AppleIntelHDGraphicsGLDriver.bundle, AppleIntelHDGraphicsVADriver.bundle FakeSMC.kext lspcidrv.kext NullCPUPowerManagement.kext Patched_10.7_AppleRTC.kext I've tried only having FakeSMC and NullCPUPowerManagement and it makes no difference.
  11. Planning to install MacOSX Leopard

    Yay! I got Mac OS X Leopard working... (iDeneb 10.5.5) Just a few last issues.. I got a USB wireless adapter which is a TP-LINK TL-WN620G which uses the Atheros AR5523 Chipset. It is recognized by Leopard as a 108M USB Adapter but I still can't see it in System Perferences > Network. Any help would be appricated.
  12. Planning to install MacOSX Leopard

    Okay.. found a few guides how to setup XP or Vista onto the machine. Is it possible for Leopard (iAtkos 10.5.5) to use the chain0, XP Bootloader method as mentioned here? http://forum.insanelymac.com/index.php?showtopic=52954 (It says Tiger, not sure if it will work with Leopard) If it would, then I'll just install Vista afterwards and the boot.ini of XP would still remain. If it won't work, is there an alternative that would work when installing both XP and Vista?
  13. Planning to install MacOSX Leopard

    Okay.. getting iDeneb.. it's going to take a week or two to finish... The one part that I don't really get is the dual (in my case.. triple) booting and to install Windows first, Mac first, has to be a primary partition etc... So, would someone please explain to me how to accomplish a triple-boot? Thanks
  14. Hi everyone! This is my 1st time here so forgive me if I seem like inexperienced... After reading some topics in this awesome forum.. I decided I would like MacOSX on my new computer. First of all.. my computer specs: - Processor: Intel Core 2 Quad Q8200 2.33GHz - Motherboard: Gigabyte GA-EP45-DS3 - Video Card: nVidia Geforce 9800GT - North Bridge: Intel P45 Express Chipset - South Bridge: Intel ICH10 - Memory: 4GB - HDD: 640GB (blank) - Sound: Realtek ALC889A codec - LAN: 2 x Realtek 8111C chips (10/100/1000 Mbit) - WLAN: TP-Link TL-WN620G (Atheros Chipset) (USB) - DVD: LG SATA DVD-Writer What I want my computer to have: - Windows Vista x64 (200GB) - Windows XP x64 (200GB) - MacOSX Leopard (200GB) - Spare HDD (40GB) I got Kalyway 10.5.2 on a DVD and burnt it onto DVD. Can someone guide me how to do this? I have read the forums and the different ways how to do this but I don't know the best way to do this, anything to watch out for etc... Thanks in advance...
×